Lenovo G50 45 has a blue screen error code 0x000014c

Summary. The solutions to this situation are as follows: 1. Restart the computer

Try restarting your computer first and see if that fixes the issue. 2. Restore the system: If the computer can't start normally, you can try to use Windows to restore the environment.

Press F11 or other shortcut keys to enter the recovery environment when the computer is turned on, select "Advanced Options", and then select "System Restore" or "Reset This PC". 3. Repair Startup: Also in the recovery environment, select "Advanced Options" and then "Start Repair".

This option will attempt to fix the startup issue automatically. 4. Check the hardware: The blue screen error can be caused by a hardware failure.

You can try to check your computer's hardware, such as memory, hard drive, monitor, etc. It can be detected using some third-party tools, such as memtest86+. 5. Reinstall Windows:

If none of the above methods can solve the problem, you can consider reinstalling the Windows operating system. Back up your data before reinstalling, and then reinstall the operating system using a Windows installation disk.

Hello, glad to answer for you, the blue screen of Lenovo computers** is usually caused by 0xc0000001 corrupted or missing system files.

The solutions to this situation are as follows: 1. Restart the computer: First try to restart the computer to see if it can solve the problem.

2. Restore the system cover: If the computer cannot start normally, you can try to use Windows to restore the environment. Press F11 or other shortcut keys to enter the recovery environment when the computer is turned on, select "Advanced Options", and then select "System Restore" or "Reset This PC".

3. Repair startup: Also in the recovery environment, select "Advanced Options", and then select "Start Repair" after the trouble. This hail option will attempt to fix the startup issue automatically.

4. Check the hardware: The blue screen error can be caused by a hardware failure. You can try to check your computer's hardware, such as memory, hard drive, monitor, etc.

It can be detected using some third-party tools, such as memtest86+. 5. Reinstall Windows: If none of the above methods can solve the problem, you can consider reinstalling the Windows operating system.

Back up your data before reinstalling, and then reinstall the operating system using a Windows installation disk.

Generally speaking, if it's not a system problem, it's a hardware problem, try to unplug the memory module or clean all the slots on the motherboard (including the CPU), if it's still like this, it may be that some hardware is broken, such as a hard drive.

After restarting and entering the system, find a strong antivirus software, first kill the virus, and then play the sp1 sp4 patch, and everything is OK.

1.Start with the software, if running the software causes an error, it is recommended to reinstall the software, which can generally be solved.

2.Consider whether other software is running at the same time, causing conflicts, or if the host configuration memory is too small, resulting in memory overflow or exhaustion (for example, if the XP system is used, it is recommended to configure more than 512MB memory or 512MB).

3.Check whether the driver or BIOS has been reinstalled or upgraded recently, then it is likely to be caused by driver incompatibility, just uninstall and reinstall the original driver.

4.If you exclude the first three points, you can basically tell you that it is unfortunate! It's probably a hardware issue. To determine whether it is a hardware failure, it is recommended to format the hard disk, reinstall the system, see if it is normal, and rule out viruses and system-related faults!

5.Hardware problems, I explained above, mainly check the memory, check whether the memory metal strip is oxidized, if more than two memory are installed, remove one or change the memory slot. Other motherboards, power supplies, heat dissipation, etc.