What major can you work in the power supply bureau?

1. Recruitment target.

The 2011 full-time graduates enrolled in the National General Higher Education Program are required to major in electrical engineering, and the specific professional requirements are shown on the job application page.

2. Basic conditions.

1. Professional counterpart, and must obtain the corresponding graduation certificate and degree certificate before July 2011.

2. CET level 4 or above in English; Those who apply for the county company can be appropriately relaxed.

3. Physically and mentally healthy, able to meet the work requirements of the power industry.

4. Good conduct, honesty and trustworthiness, with a good sense of teamwork.

5. The age requirements for graduates are: undergraduates under the age of 25 (born after June 30, 1986), master's students under the age of 28 (born after June 30, 1983), doctoral students under the age of 33 (born after June 30, 1978).

3. Recruitment positions.

Please refer to the job application page for specific job requirements.

4. Recruitment Procedures.

2. Resume primary selection: The company's recruitment team will conduct a preliminary screening of the candidates' resumes and notify the time and method of the retest.

3. Organizational test: The company's recruitment working group will take written examinations, interviews and other forms of assessment for candidates who have passed the primary selection.

4. Sign the agreement: Applicants who have passed the test and passed the physical examination will sign an employment agreement with the graduates after the company reports to the competent department for approval as required.

The most direct is electrical engineering, in addition to the country seems to have only one or two universities have a major in transmission lines (Northeast Electric Power), the major must be the right one, and now the recruitment caliber is at the provincial company level, and it may not be used if there is a relationship. In addition, those who study accounting can also enter by passing the unified examination.

Electrical engineering and automation (including power system and automation, relay protection, high voltage and insulation technology, electrical technology), transmission lines, communication engineering, measurement and control technology and instruments, etc.

Electrical engineering.

Hello, I'm glad to answer for you, I want to enter the power bureau to learn the majors: 1, electrical engineering - similar to electrical engineering, electrical engineering and automation, power electronics and power transmission, high voltage, motor and electrical and other industries, these majors should be regarded as the most counterpart, as long as the university is strong enough, the opportunity to apply for the national grid will be greater. 2. Electronic information majors - similar to communication engineering, automation, network engineering, computer, software engineering and other majors are also more famous for entering the State Grid, and they are also a relatively corresponding category.

Of course, even if this kind of major does not enter the State Grid, the employment rate is also very high, but there is one more direction. 3. Finance and finance - such as actuarial science, insurance, finance, financial accounting and other majors, also have the opportunity to enter the State Grid system to work, of course, there are relatively few such counterpart positions, whether you can get in is mainly to talk about personal ability and opportunities. However, this kind of major has a good prospect after learning well.

4. Engineering majors, such as mechanics, mechanical engineering, power engineering, environmental engineering, optics and other majors, also have the opportunity to enter the State Grid, but relatively speaking, the corresponding positions and advantages of power majors are definitely greater. However, students in this type of major also have opportunities to enter.

If you want to work in the power sector, you must choose a major in electrical engineering and automation.

Apply. To apply for the electrical engineering and automation major, you can choose some of the following schools:

Tsinghua University. Xi'an Jiaotong University, Huazhong University of Science and Technology.

Zhejiang University, Chongqing University, Tianjin University, Harbin Institute of Technology, Shanghai Jiao Tong University.

North China Electric Power University, Southeast University, Southwest Jiaotong University, Shenyang University of Technology, China University of Mining and Technology, South China University of Technology, Nanjing University of Aeronautics and Astronautics, Beijing Jiaotong University, Wuhan University, Harbin University of Science and Technology, Sichuan University, Hohai University, Harbin Engineering University, electrical engineering and automation involve power electronics technology.

Computer technology, electrical and electrical technology, information and network control technology, mechatronics technology.

and many other fields, is a comprehensive discipline, its main characteristics are the combination of strong and weak electricity, mechanical and electrical, software and hardware combination, electrical technology and good electronic technology, components and systems, so that students can obtain electrical electronics, system control, electrical control, power system automation, electrical automation devices and computer application technology.

and other areas of basic skills.

This major cultivates senior engineering and technical talents with basic knowledge of engineering technology and corresponding professional knowledge of electrical engineering, and has the basic ability to solve the problem of electrical engineering technology analysis and early system control. The major of electrical engineering and automation is to cultivate wide-caliber and compound senior engineering and technical talents who can be engaged in electrical engineering and automation, computer technology application, economic management and other fields for all walks of life.

Summary. Hello Undergraduates entering the power grid positions are generally as follows: 1

Substation operation and maintenance The work content is probably to be on duty at the substation, monitor the working status, and operate according to the dispatching instructions, such as switching power lines, throwing back capacitors, adjusting transformer taps, etc. 2.Substation overhaul is mainly responsible for substations.

Maintenance and overhaul of primary and secondary equipment, calibration of relay protection and automatic devices, high voltage and instrument test, oil laboratory and other work. 3.Regulation and control operation is divided into two aspects: monitoring and scheduling, and there is no need to go to the site.

Monitoring uses the information transmitted by the dispatching computer and the network system to monitor the operation of the power grid, so as to assist in the dispatching and command of the power grid.

What kind of work do you do when you graduate from a bachelor's degree and enter the power grid?

Hello Undergraduates entering the power grid positions are generally as follows: 1Substation operation and maintenance The work content is probably to be on duty at the substation, monitor the working status, and operate according to the dispatching instructions, such as switching power lines, throwing back capacitors, adjusting transformer taps, etc.

2.Substation overhaul is mainly responsible for substations.

Maintenance and overhaul of primary and secondary equipment, relay protection and automatic device calibration and inspection work, high voltage and instrument test, oil laboratory and other work. 3.Regulation and control operation is divided into two aspects: monitoring and scheduling, and there is no need to go to the site.

The monitoring uses the information transmitted by the computer and the network system to monitor the operation of the power grid, so as to assist in dispatching and commanding the power grid.

I don't know which province you are from, as far as I know, since 2011, the policy of Liaoning Provincial Company is to enrich all the fresh graduates who are called in the second batch of undergraduate electrical majors, and they are basically distributed to the surrounding counties of various cities. The work in the power supply company mainly includes production, marketing, administrative several groups of slag Kai a big professional, if it is a power professional, it is possible to engage in production and marketing, production mainly includes, substation maintenance, substation operation, distribution operation inspection, scheduling operation, safety inspection, etc., marketing mainly includes, business, electricity inspection, meter reading management, metering management, etc., basically any enterprise has administrative aspects, such as office, party building, finance, logistics, etc., power supply companies in recent years are mainly counterpart professional recruitment, There are some non-electrical majors, information classes and Liangwan financial and accounting classes, good luck!

To put it simply, if you want to enter the Electric Power Bureau, it is best to choose several electric power universities in the country: North China Electric Power University, Northeast Electric Power University, Changsha University of Science and Technology; It is best to choose the major of electrical engineering and automation. In addition to the above three universities, Xi'an Jiaotong University, Harbin Institute of Technology and other schools are also very good in electrical engineering.

In fact, power companies are similar to other industrial enterprises in a large scope, and are divided into three major work sectors according to different work contents. The work content of different sections will also be different, as follows:

1. Production production.

Generally, fresh college students enter the factory, are from the production class (mainly shouting to congratulate the operation of the post) to start, generally in the work of about half a year, will gradually be assigned to other positions according to the specific actual situation, this "other job book infiltration" The main reference basis is the university major, job needs, and personal ability to show.

Shifts are mainly required for operational positions (some power plants also require shifts for fuel management), such as equipment maintenance and maintenance, which requires someone to be on duty at night, but can be reversed.

Second, the operation department.

If you are majoring in electrical, thermal, automation and other undergraduate majors, fresh college students generally enter the operation department after entering the power plant. It is difficult for fresh graduates to enter the equipment department, and the equipment department generally requires several years or even more of operating experience to enter.

The positions of the operation department mainly include inspection, deputy control, main control, and duty chief. Sub-control and main controlSome power plants are called sub-values and main values. In addition, we will not talk about this comprehensive position in the end. These basically look at the job name, and you will know what you need to do.

The following is an introduction to the university I want to go to in the power supply bureau

Among them, electrical engineering and automation are the most relevant, so it should be the first choice, and of course, it is also the major with the highest score in these institutions.

In addition, there are smart grid information engineering, electrical engineering and intelligent control, intelligent electrical appliances, cable engineering, light source and lighting, energy and power engineering, nuclear engineering and nuclear technology, etc.

Expansion capital

1. The best opportunity to enter the State Grid is campus recruitment

For our students, in fact, the best opportunity to enter the State Grid is campus recruitment, there are many positions, the probability of admission is high, we can participate in the State Grid public recruitment examination, the school recruitment is divided into two batches.

When we talk about spring recruitment and autumn recruitment, the registration time for the recruitment released to the State Grid before, the first batch is generally about December each year, and the second batch is around March of the second year.

We can pay attention to the official recruitment platform in time to see this time, the exam is divided into two parts: written test and interview, and we must grasp our own identity as a fresh graduate, because Rock Oak requires us to apply for the exam as a fresh graduate.

Except for a few areas where some positions will relax some conditions, in some places the company will require undergraduates to score above 425 points in level 4 or level 6, and some will require the level 2 computer certificate.

We must pay attention to the latest recruitment needs and changes in a timely manner, and take the latest as the standard next to the coarse lead, there is a certain difference between the two batches of recruitment, and the number of recruits in one batch will be more than two. Usually, a batch of recruited positions are mainly electrical.

Then include some computer and communication students can apply for the position, we say that it requires a bachelor's degree or above, many students are mainly employed in a group.

2. What are the majors recruited by State Grid?

In addition to recruiting electrical positions, there will also be some non-electrical majors. We take Shandong as an example, accounting, civil engineering, power engineering, law, mathematics, etc. have recruitment, which is mainly based on undergraduate education, and there will also be recruitment positions for junior college students, and the positions of junior college students will be mainly concentrated in the second batch.