Is there anything I can do if the table shakes badly?

1. Remove the sharp corner burrs on the angle iron first, and use the angle iron to grind the sharp corners on the ground to avoid scratching the fingers of the clothes when using.

2. Determine the location of the loose connection first. You can shake the table and look closely.

3. Use a hammer to knock on the joints (it is very important here to ensure that the parts of the assembly are accurately positioned and fit firmly without gaps).

4. Place the angle iron at the connection and nail it firmly.

5. Repeat the above steps, check other shaking parts, repeat the positioning, and nail firmly.

Related Notes:

When living alone, if the space in the home is not large, then the length of the dining table should not be exceeded; a dining table for two; For families with parents or elderly people living together, a larger dining table is suitable.

Square table 760mmx760mm square table and 1070mmx760mm rectangular table are commonly used table sizes. If the chair can fit under the table, even in a small corner, you can put a six-seat table, and when you dine, just pull out a few of the tables.

The width of the dining table of 760mm is the standard size, and it should not be less than 700mm, otherwise, when sitting opposite the table, the dining table will be too narrow and touch each other's feet. It is better to have the feet of the dining table shrunk in the middle, if the four feet are arranged in the four corners, it is very inconvenient. The height of the table is generally 710mm, and the chair is equipped with a height of 415mm.

The table is lower, so you can see the food on the table more clearly when eating.

Is it the diagonal shaking of unevenness, or the unreliable shaking of the left and right back and forth? If it's the former, just put something on the table legs... If it's the latter, just straighten the table first, and then tighten the screws on the four legs.

The legs of the table are uneven, try to cushion them.

Solid wood dining tables on the market are endless, for consumers who love solid wood dining tables, the texture, texture, and original ecology of solid wood dining tables are the main factors that attract them, many families will have a question when choosing solid wood dining tables, do not let hard metal objects collide with tables and chairs, if you accidentally leave scratches, you can color according to the primary color of solid wood dining tables and chairs, and then apply paraffin wax in order to form a protective film.

There are many kinds of solid wood materials, and the characteristics of different solid wood materials are different, so when choosing, it is best to choose materials with anti-corrosion, wear-resistant, easy to clean, heat-resistant and other characteristics. To avoid damage to the paint film, when putting high-temperature tableware, remember to add a heat insulation pad, change it in the season, and keep the temperature and humidity balance at home, avoid drying and humidity in the past, and avoid dragging the solid wood table roughly, otherwise it is easy to cause the structure to loosen.

The dining table still has to match the overall furniture style of the home, I don't know what style you like, if you like Nordic.

For a minimalist style, I recommend you to use the North American black walnut female table. The material is not very heavy, easy to move, and easy to maintain. As long as you wipe it with a damp towel, it will be clean, and maintenance is simple and effortless.

Our company's dining tables and chairs have been exported, and all the money we earn is foreigners, and we used to be IKEA.

The supplier also has cooperation with Japan's largest home furnishing mall, quality, environmental protection, wood. There are all test reports, engaged in this area for 40 years, the quality can be assured.

Generally, the regular point of the enterprise in the following with triangular solid wood glued up, and then with a screw lock, see clearly is the screw, under normal circumstances, as long as the chair feet constantly, basically will not be loosened Now many enterprises directly use an aluminum alloy corner code with a screw lock, the same appearance, why people are cheap, details laymen do not know that the material is soft, easy to dry, good processing performance, material color and pattern are very beautiful, paint and gluing performance is good, not easy to split; Good rot resistance and other advantages, but because of its poor nailing power, yellow pineapple is used.

Furniture made of materials often has disadvantages such as instability.

Because the solid wood material is completely inelastic, sometimes the ground is not level enough, sometimes the table legs are too thin and the support is not enough, or the design of the table leg surface is not flat enough, so it will shake.

It may be due to the imbalance of the table legs, it will often shake, if it is because the table legs are balanced, it may also be due to the influence of floor slippage, and the table will also shake frequently.

The main reason is still the problem with the table. The 4 legs of the table are not fixed steadily, or the 4 legs are not the same length. If this kind of problem occurs, you can find the best party at the table.

This is because the leg size of the dining table is not enough, so it is uneven, so it will wobble, and it can be solved by putting some paper on it.

Because the quality is not strong, the quality of the solid wood dining table is not good, so there will be a phenomenon of shaking.

1. If the table is shaking in the classroom, you can put a piece of paper under the leg of the table, which is really useful, my middle school has to change the position every two weeks when the classroom is in class, that is, the middle one is moved to the side, and the most edge is moved to the side of the classroom, saying that this can allow us to better protect our eyesight. At that time, when moving the desk, the table would always be uneven and shaking, so putting a piece of paper under the table can solve the problem of desk shaking. The shaking is because the floor is not so flat, which causes the desk to shake, which is very normal, and it is impossible to flatten the ground, so you can only find a way to flatten the legs of the table.

2. This kind of desk used in the classroom can be used in the method of padding paper, if the large desk used in the bedroom or study can buy something from the Internet that specially pads the table, it is very easy to use, and it will reduce the shaking of the desk a lot. In fact, not only the desk but also other tables can be shaken in this way, which is a small trick of life, only if you see more, can you make better use of it. We can't solve the shaking of the desk, we can only find a way to flatten the table, so the solution to the shaking should be based on your own hobbies, if you want to look good, then you can go to the Internet to buy those specially under the table, and you can go to the pad cloth or paper, although it is not very good-looking but it is also very practical.

3. When we encounter many problems in life, we will find ways to solve them, and the small tricks in life are very useful, and we have to find these little tricks, which will bring us great convenience. It is a very useful way to shake the desk under the paper pad, the shaking can be more padd, the shaking is less can be less pad, and the thickness of the paper is determined according to the actual shaking of the table.

A little over a year ago, I bought a desk online. I recently moved into a new house and started using it, only to realize the problem: when typing or writing, the desk swayed from side to side. The shaking will cause the monitor and desk lamp to shake from side to side. Very unpleasant.

Now, more than a year has passed, and I can't solve it when I find a store. I don't know how to carpenter either, so I don't know how to study. Here are a few ** here, and ask all the masters, is there any way to solve the shaking problem? Thank you in advance! Close.

If the dining table has a foot mat, because the foot mat falls off and the dining table is unstable, it is recommended to buy a new foot mat to fix the dining table.

2. Homemade table mats. Find a few pieces of cardboard, cardboard and other items, and stick them to the unstable table legs with adhesive tape to achieve the effect of balancing the table.

3. Level the ground. If the table is shaking due to uneven floors, it is recommended to level the floor or place the table in a stable place.

4. Buy a new dining table. Depending on the family's financial situation, it is advisable to buy a new table if possible.

5. Do not place fragile items on the table. If the shaking problem of the table is not solved, it is recommended not to place fragile items on the table to avoid damage caused by falling.

6. Ask professionals to repair. If the table shakes so badly that you can't handle it yourself, it is recommended to ask a carpenter or after-sales personnel of the table product to repair it.

1. Remove the sharp corners and burrs on the angle iron, and use the angle iron to smooth the sharp corners on the ground; 2. Shake the table lightly and observe carefully to determine the loose connection; 3. Hit each connection with a hammer, then place it at the connection with an angle iron, and nail it firmly; 4. Repeat the above steps, check the other shaking parts, and finally nail the four legs of the table firmly.

Table shaking fixing tips.

Before fixing the table, you should prepare some necessary tools, such as nails, hammers, and some angle irons to secure the connections. The table shakes many times because the connection is loose, so it only needs to be fixed again. When the necessary tools and equipment are ready, you can use a hammer to tighten the joints at the shaking edges, and finally fix them firmly with an angle iron and nails.

Or you can also tighten the screws connecting the leg frame and the panel, and the leg frame brace and the panel; Or connect the cross brace that is connected to the leg frame at the bottom firmly. If neither of the above methods work, it's time for a new desk. Furniture (panels) such as wood-based panels have been around for a long time, and it is estimated that its grip force is almost gone, causing shaking.

Tables and benches will fall into disrepair if they are used for too long.

Place a folded piece of paper under the table, and control the thickness of the paper until the table does not shake.

The table shakes many times because of loose connections, so you just need to fix it again. When fixing, you should first prepare some necessary tools, such as nails, hammers, and some angle irons at the joints of Zhaoxiang. If the tools are not complete, you can buy some at the building materials store, when the necessary tools and equipment are ready, you can use a hammer to hammer each joint at the shaking side joint, and finally fix it firmly with an angle iron and nails.

Shaking the table may sound like a difficult task, but in fact, it is not that difficult to solve as long as you master some simple methods of repairing furniture. In fact, whether it is a table or a chair, it will shake after being used for a long time. However, most people now have a strong sense of saving, as the so-called "sewing for three years, making up for three years, sewing for three years, sewing Xiang did not sew and repaired for another three years."

Therefore, when the furniture at home shakes slightly, many people will choose to repair it again and use it.