About the problem of Ruijie client using a wireless router to share the network high score for the

It has been started According to the information you provided, it should be that the connection between the router and the campus network is not normal, you need to check whether the router supports Ruijie's relevant standards,,Many routers do not support Ruijie。

If you can't enter the configuration address of the router in the browser, you can try it by powering off the router, which can generally be solved. Unplug the power cord for about half a minute.

The school requires that the IP and DNS be obtained automatically, and the protocol should not need to be changed. If you change your IP address to automatic acquisition and disconnect the network, check whether your DNS and DHCP services are enabled. (How to check:.)

Right-click on the "My Computer (Computer)" icon, select Administration, enter the management page, select "Services" in the left column, and then a lot of services will be displayed on the right, you can check whether the service status of your computer's DHCP and DNS is "Started" and "Automatic", if not, you want to modify the options. ）

In addition, to check whether your Ruijie settings are correct, in the setting DHCP settings, check whether you select "Obtain after authentication" (generally the default is "not used", and the IP address cannot be obtained normally in the "not used" state).

It's no problem that both of your NICs are automatically obtained.

PS: Personal wireless network solution in the dormitory. Since your own mobile device also needs Wi-Fi, but the school does not allow the use of routers.

So I shared my laptop's network to the wireless network. The specific method is: 1. Install the Ruijie version, and obtain it after setting the authentication. 2. Install the Connectify software.

You can use Connectify to surf the Internet) so that you can share Wi-Fi from your laptop.

Only wireless routers that support Ruijie function will do.

The following is an example of a router of a certain brand:

1. Log in to the background of the router (provided that the router supports the Ruijie authentication function).

2. Find the "Advanced Functions" option in the router background as shown below.

3. Select "Ruijie Authentication", enter the correct password and log in.

At this time, the wireless router can access the Internet through Ruijie authentication.

W7 doesn't seem to support connecting to ordinary routes now.,It's like your motherboard can only be connected to a maximum of 256M memory.,But you have to connect 2G.,Then it's estimated that you won't be able to use it.,That's probably what it means.。

Do you want to do wireless routing and sharing Internet access in the school dormitory, right?

Your stand-alone Internet access is Ruijie client input username and password

You should install 2 network cards in your computer, and then enable the routing of win7**, the IP address of the 2 network cards should be set up Oops, typing is too troublesome QQ chat

Web page verification Internet access using the router WAN port, does not work, the router only supports PPPoE dial-up Internet account plus password.

1.When the switch is used, it should be possible to see if there is a network speed limit, and whether the web page verifies whether the account can be logged in at the same time.

To establish a wireless hotspot, you need a laptop with a wireless wired network card, and the wireless network card supports the wireless hotspot function. There are win7 building hotspot tutorials on the Internet.

2.As long as you can access the Internet, you can build a hotspot, which is quite similar to **Internet access, and Ruijie cracks It doesn't matter if you don't crack it, Ruijie doesn't have this hotspot limit, it can only do billing traffic control.

3.Ruijie If you can log in, then you can set it freely.

software, quite the same as broadband dial-up. Third-party software, and cracking dual network cards has nothing to do with it.

5. In your case, if the web account can only be logged in with a single account, two users cannot log in at the same time. You can't share the internet. But you can set up a hotspot for a notebook for mobile phones and laptops to access the Internet wirelessly. If you are limited by data, the more users you surf the Internet, the busier it will be.

It can be realized, but the two routers cannot be on the same network segment, that is, the IP on the gateway cannot be the same.

Classmates, how to transfer the network in the dormitory to wifi, how to pass the wireless router certification Ruijie, can Ruijie be burned into the router (our teacher said, there is a router that can, and it is related to linux)?? Network: hust

Hehe, look at this point is mine.

Since your computer has two network cards, it is very simple, the two network cards are the machine as a server, and the desktop has two fast network cards, one is the external network, and the other is the internal network. Set the intranet card to automatically obtain the IP address and save it.

1. Enter the external network card, the properties --- have an option to share the Internet, tick and save. After that, you will find that the IP of the intranet card will automatically become.

2。I'm considering here that you are dialing up the Internet,There must be an icon of broadband Internet access you created below the local connection,Attribute ---There is also a shared Internet access here,Check,He will prompt you that the current sharing will overwrite the sharing of the local connection,OK,Save,Disconnect from the external network,Reconnect,OK。

3。Change the IP acquisition method of the notebook to automatic, and be sure to turn off the firewall of both computers.

4。Connect the two computers directly with a network cable, and the laptop can access the Internet.

You don't need a router if you have a dual network card.

Win7 uses a network card to connect to the external network with a pass-through line, and the other network card connects to another computer with a pass-through line.

Then go to the control panel - network and internet - view the network status and tasks on the left side of the change adapter settings and then drag the two local connections and click the right click to create a bridge, out of the bridge after the right click, set to ip to get automatically, this book is also set to get automatically. Then you can surf the Internet freely.

Win7 networking is much more convenient than before.

Just do it through your router!

Simply connect to a switch or server via the network!

Wireless routers don't need to be supported, all wireless routers will work.

Use the wireless router as a wireless switch and do not use the WAN port of the router.

First, turn off the DHCP service of the router.

Connect the office network cable to the LAN port of the wireless router, and connect the computer to the router wirelessly.

The above is a physical connection, so that the computer is connected to the office network, which is no different from connecting with a network cable.

If the office network is automatically assigned IP, set the NIC IP and DNS to be automatically obtained.

If it is not automatically obtained, set the IP of the network card, subnet mask, gateway, DNS service in the computer, and if the client binds the MAC address of the network card, it is necessary to modify the MAC to the bound value in the wireless network card attributes.

Finally, use Ruijie client authentication, pay attention to the authentication of the right network card.

If that doesn't work, it's a good idea to disable the other network cards and make sure yours can be used in the office where the router is placed.

The school's network is not as simple and convenient to use as broadband at home, and different schools may have different moods and grandiosities, and there are many details to pay attention to.

There is a problem with hi

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. Look through the nameplate or instruction manual at the bottom of the router to find the router IP, default account and password. If the access is optical fiber, the IP address of the fiber modem must not be in the same network segment as the router IP address, otherwise it is easy to conflict.

3. Open the browser, enter the IP address and press enter, if the input prompt is incorrect, it means that it has been modified, you can only press and hold the reset button on the router to restore the router to factory settings and reset it;

4. Enter the router login interface, enter the default login account and password queried, if the input prompt is incorrect, it means that it has been modified, and can only be reset after resetting the router by pressing and holding the reset button on the router;

5. Enter the router settings interface, find the setup wizard on the left menu bar, select Next according to the prompts, and select PPPoE dial-up Internet access;

6. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

7. Set the wifi password, try to make the alphanumeric combination more complicated and not easy to be rubbed off the network (this step is for the router with wifi function, and without wifi function, go directly to the next step);

8. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Possible scenarios:

1.For router settings, it is recommended to set both the router and the computer to automatically obtain the IP

2.Check whether the router is set to MAC address binding If it is set, if your computer's MAC address is not in the router MAC address list, it is not possible to access the Internet through the router, it is recommended to turn off this function or add your computer's MAC address to the router MAC address list

3.Check whether DHCP is enabled on the router

4.When the computer is connected to the Internet, log in to the router page to see if the computer host address is in the router host list, or after the network is disconnected, you can see whether the computer is connected to the network

5.Click on the system network repair, let the system repair the computer network by itself, and the system also has feedback results, you can refer to it

6.It is recommended to update the network card driver of the computer, and you can use the driver wizard to update other drivers of the computer by the way

7.Check whether the router broadband dial-up (if you use the router dial-up to access the Internet) is correct You can fill it in again, this must be correct

8.It is recommended that you can also use a sharp object to press the reset button on the back of the router to restore the router to its factory state, and then set the router again

The above can refer to the above).