-
Anonymous users2024-02-05Here's how to set up your router:
1. Line connection:
a.Connect the network cable from the cat to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1, 2, 3, 4).
b.Connect the broadband cable to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1 2 3 4).
2. Log in to the router interface.
In the browser, type: Enter, enter in the pop-up page: admin and click "OK".
3. Set up the router to surf the Internet.
Before setting up the Internet access, choose the correct Internet access method: Generally, there are three types as follows:
ADSL dial-up: Usually to access the Internet (when not connected to the router) need to click on the broadband connection, dial-up is successful before you can access the Internet, you should choose the Internet mode, Internet access and Internet password correctly enter the broadband and password, you can.
Automatically obtain an IP address: If you usually surf the Internet (when you are not connected to the router), you only need to set the local connection of the computer to automatically obtain the IP address to access the Internet, you should choose this Internet access method.
Static IP: If you need to fill in a fixed IP address in the local connection to access the Internet (when you are not connected to the router), you should choose the Internet access method, log in to the interface of the router, click "Advanced Settings" - "WAN Port Settings" to select the static IP mode "Static IP Mode", and enter your fixed IP address, subnet mask, gateway, DNS domain name server and other parameters correctly.
4. After setting, click "Advanced Settings" - "System Status" to check whether the connection status of the WAN port shows that it is connected, and whether the corresponding connection mode is displayed correctly.
The corresponding connection mode for ADSL dial-up is: PPPoE
The connection mode corresponding to the static IP address is the static IP address
**The following is how to set it up
-
Anonymous users2024-02-04View the WAN port settings.
-
Anonymous users2024-02-03If your router cannot be connected to the network after it is set up, and the WAN port status shows "Connecting", please troubleshoot the problem by following the following steps:
The WAN port displays the troubleshooting method in the connection.
-
Anonymous users2024-02-02Step 1: Remove the route, only use the cat to connect to the computer, whether it can access the Internet.
Step 2Restore the router to factory settings, there is a button, it's very simple, you look for it. Then press and hold for a few seconds and you're good to go. Then remove the cat, use the computer to connect only the router, go in and set it up again. Gateways and routing.
Step 3, Ping the gateway. If you can ping it, you can get on the cat again, and you should be able to surf the Internet.
-
Anonymous users2024-02-01Keep holding down the router with a button, reset it and try it.
-
Anonymous users2024-01-31Restart the router (power off), restart the computer (the IP settings are automatically obtained), and the router is connected to only one computer (except for the power supply, a network cable connected to the computer, nothing else).
-
Anonymous users2024-01-30Hello. You can try resetting the route and then setting it up again.
The default setting is the IP address of the interface.
There is no doubt that the problem should be approached in this way: >>>More
Maximum transmission rate: 300mbps
Network standard: Wireless standard: IEEE 802 >>>More
Ordinary routing and software do not have much effect even if the speed is limited, the key is to solve the main application under a variety of applications is not affected, so you had better change to an intelligent QoS route, although the ordinary route can limit the speed, but can not guarantee the delay of the game, the browsing of the web page, because to do**game web browsing does not interfere with each other, simple speed limiting is not enough, but also to set up a guarantee bandwidth, limit the maximum number of connections, turn on burst traffic, set priority, set the game port priority, turn on small packet sending** Priority and so on. Generally, these functions can only be achieved by intelligent QoS routing. It is recommended that you buy an intelligent QoS behavior management route, and you can even directly block others from watching**,**etc.
Hello, it must be that your router has not been set up successfully, your broadband login has not been successful, and there is your computer room desktop, and you can also use portable wifi. Receive signals from your wireless route. Recently, one of the more popular ones on the Internet Tencent National WiFi feels more suitable for you to use. >>>More
Enter the router and set the wifi password in the wireless settings, and then use the wireless device to open the wifi connection to your router and enter the password on the router by default The computer's IP settings and DNS settings are all set to automatically obtain, if you want to enter the password to access the Internet, enter the router settings and use the wizard to set it step by step The connection type is selected as the mode that begins with p Don't choose static and dynamic If you plug in the network cable and go online directly, you can choose dynamic If the campus network gives you a fixed IP, then you can choose static.