What should I do if the wifi of the Xiaomi mobile phone is deactivated

Usually the reason that causes the phone to connect wifi to show "deactivated" failure is due to the wireless router.

Safe Mode" is improperly set, which we can solve by the following methods.

In the router management interface, switch to the "Wireless Settings" tab and click the "Wireless Encryption" item, where you can set the "Safe Mode".

Click on the "Safe Mode" drop-down list and select the "WPA2-PSK" item from its extended list, which is a secure encryption mode that all phones support.

Click the "OK" button to save the settings. Finally, switch to the "System Tools" tab and click the "Restart Router" button to restart the router.

Finally, you can try to connect to the wifi hotspot with your mobile phone.

There are several scenarios in which the phone cannot connect to Wi-Fi properly:

1) The wifi signal is set to hidden, you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password connection in the mobile phone [Settings] - [Wireless LAN] - [Other Networks].

2) If the router is faulty, try to restart the router.

2. Prompt that the connection to the wifi is refused, and the fault phenomenon: others can be connected, but they can't connect to the wifi, and the connection is refused. Here's how to fix it:

1) The router device may have enabled wireless MAC address filtering, it is recommended to contact the NMS to add the MAC address of the mobile phone. The MAC address is viewed in [Settings] - [About This Mac];

2) If the router is faulty, try to restart the router.

3. The mobile phone connection to wifi prompts that it has been saved, but the connection fails. Here's how to fix it:

1) This prompt indicates that the encryption method, password or signal channel of the router of the wifi signal has been modified. It is recommended to reset the password and encryption type of the router, and the terminal connected to this network needs to [Ignore this network], and re-enter the password to connect.

2) If the router is faulty, try to restart the router.

If the "Safe Mode" setting is incorrect, there will be a problem that the mobile phone is connected to the wifi "disabled". The steps to solve the potato are as follows:

1. Open the browser and enter the wireless router management address, enter the "username" and "password" in the router login page, and then click "Login".

2. After entering the router management page, click "Wireless Settings" on the left side. Next, tap on "Wireless Security" under "Wireless Settings".

3. On the right side of the page, find the "Add Key Hand Dry Mode" and click the triangle symbol on the right side of it, then click to select "WPA2-PSK" in the pop-up drop-down table, and then click "Save".

4. Finally, restart the router, after the restart is successful, the mobile phone will no longer show that the wifi has been deactivated, and the wifi can be used normally.

5. Then you can see that the connection is successful.

Turn off and restart the wifi

When we use our smartphone to surf the Internet, the phone retains a network IP address assigned by the WiFi connection.

It will be applied to the current Wi-Fi, so if there is no address conflict, there is no need to worry, if there is a conflict, you have to close and restart the Wi-Fi connection.

2. Ignore the network.

If that doesn't work, you should choose to have your Android device ignore the network and add it again.

3. Check the wifi password.

In general, in order to ensure the security of the network, the password of wifi should be changed regularly, however, when the network makes such adjustments, the mobile phone will not be automatically updated, and we need to manually update the connection password of the mobile phone Wi-Fi.

Fourth, the password is correct but there is a problem with the identity verification.

This kind of general may be a problem with the input method, and we are better off using the Android system.

Enter the password with the native input method, and pay attention to the capitalization!

5. Check the Wi-Fi advanced settings.

Open the phone menu, go to the "Settings" window, select "Wireless & Networks", go to "Wi-Fi Settings", then go to the "Advanced" option, go to "**Server".

Settings", make sure that the Android device is not using the **server, and if the IP address or domain name is found in the ** section, delete it.

6. Set a static IP address.

Open your phone's [WiFi Settings] - [Advanced Settings]. Select 13 for the adjusted domain, and select Use Static IP Address, IP Static Address, Gateway: Or, Netmask.

The domain name can be left blank, press the menu key, and select Save.

The above methods can basically solve the problem that 80% of smartphones cannot connect to wifi, of course, if you don't know the password of wifi, then for the leakage of personal information and privacy, it is recommended that you choose to spend some money and use traffic.

Click on the "Safe Mode" drop-down list and select the "WPA2-PSK" item from its list of extensions. Click the "OK" button to save the settings. Finally, switch to the "System Tools" tab and click the "Restart Router" button to restart the router.

Xiaomi mobile phone wifi has been deactivated,I think there may be a problem with the function of wifi,Normal mobile phone wifi can be used anytime and anywhere,There is no deactivation of this statement,Unless it is a system failure。

Hello, I have seen your question and am sorting out the answer, please wait a while

What should I do if the wifi connection of the mobile phone shows that it has been deactivated.

Usually, the reason that causes the mobile phone to connect to wifi shows "deactivated" is due to improper setting of the "safe mode" of the wireless router. Solution steps: 1. Turn off the wifi on the mobile phone first, unplug the power supply, plug it back in at 10s-20s, and after the router is fully working, open the mobile phone to log in to the router management address to open the page settings.

In the router management interface, switch to the "Wireless Settings" tab and click the "Wireless Encryption" item, where you can set the "Safe Mode". 3. Click "Safe Mode" and select "WPA2-PSK" from the list. 4. Click the "OK" button, switch to the "System Tools" tab, and click "Restart Router".

This is the reason why the phone has turned on the power saving mode, just turn off the power saving mode, here take the Xiaomi Mi 6 mobile phone as an example, the specific method is as follows:

Hello, dear. I'm glad to answer for you, the reasons why the wifi of Xiaomi mobile phones are automatically turned off are: 1. The wifi signal received on the mobile phone is weak.

Check the wifi signal received on the mobile phone, if the received signal is weak, then it is easy to drop the connection, at this time you can move the mobile phone to a place close to the wifi source to use, and observe the wifi connection on the mobile phone. 2. The connected wireless router is abnormal. Connect to other wifi when conditions allow, and observe whether the wifi will be automatically dropped frequently.

If the connection signal is stable, it may be that the wireless router itself is abnormal, and if conditions allow, replace it with a wireless router with better performance. 3. The mobile phone contains viruses. Use the anti-virus software on the mobile phone to thoroughly check and kill the virus on the mobile phone, and at the same time, try not to open unfamiliar files and do not browse the ** with viruses, so as not to infect the mobile phone with viruses.

4. There is a bug in the mobile phone system. Go to the system settings of your phone to see if there is a system that can be updated, and then upgrade the system to rule out system problems that cause Wi-Fi to be disconnected. It is recommended that you update the system and take a look.

I hope mine can help you and look forward to you.