Can China Telecom s router be replaced?

The wireless smart cat given by Telecom can be connected to a wireless router in the back.

Reset the router directly to solve this problem.

Refer to the following:1Locate the reset button on the back of the router. The button is small and embedded inside to avoid accidentally touching it.

2.With a pen or pin, insert it into the hole and press to guide the test light to start flashing. You may need to press the reset button for up to 10 seconds.

3.Release the button, and the router will reset automatically, as shown in the figure below.

4.After the reset, use the default username.

and password to log in to the router on your computer. The default username is "admin" and the default password is "1234" or "password".

5.Wait for the router to receive the login information. If you still can't log in to your router, go ahead and try the next step.

6.Disconnect the router from power as shown in the image below.

7.Use a pen or pin to press the reset button while powering the router.

8.Once plugged in, keep it on for more than 20 seconds and the router will restart.

9.Log in to the router on your computer with the default username and password. Now you can log in to your router.

To replace the old router with a new one, you need to disconnect the old router from the modem and power supply after getting the new router, and then connect the new router to the modem.

After the successful connection shows normal, the user can choose to use the mobile phone to set up the router, or they can choose to use the computer to set up the router.

Enter the login page of the router and enter the username and password at the bottom of the router to log in.

Then choose to change the login password of the router according to the prompts on the page, and then you can make other settings after the settings are set.

After all the parameters are set, the user only needs to restart the new router and it can be used normally.

A router is a device that connects various local area networks and wide area networks on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. The main difference between routing and switching is that the switch takes place at the second layer of the OSI reference model, while the routing takes place at the third layer, which is the network layer.

You may wish to try my above method, as long as you follow this method, I believe you will be very smooth to replace the router with a new one.

Leave it alone with the original wifi, you can't turn it off.

You just need to connect the router with the original cat output with a network cable, as for how to set up the router, refer to the manual to get it.

I know this, and that's what I use. Just do what I say. Remember, don't connect the cable directly from the telecom cat to the computer, connect it to the router and then connect to the computer. Because this kind of cat can only use one computer.

Log in to the IP address of the local router, configure the router, and modify your information in the router.

Summary. Hello, the telecom company wants to replace the new router because with the continuous development of network technology, the old router can no longer meet the requirements of modern networks. The new router offers faster and more stable internet speeds, as well as better security and reliability.

Hello, telecom companies want to replace new routers because with the continuous development of network technology, old routers are no longer able to meet the requirements of modern networks. The new router provides faster and more stable network speeds, as well as better security and reliability.

With the increasing number of network applications, traditional routers are difficult to meet users' needs for network performance and reliability. The new router uses more powerful hardware and more advanced dress-up software technology to achieve more efficient data transmission and a more stable network connection. In addition, the new router also uses a more powerful security system to better protect the user's network.

In general, telecom companies replace new routers to improve users' network experience and network security, which is also an inevitable trend in network development. <>

Hello, I'm Mr. Zhang. According to the general situation, telecom routers can be used in different cities. Because the role of the router is to send the network signal to different devices, and the telecom router itself is not restricted to be used in a specific city.

So, as long as you use the same telecom service in different cities, you can use the same router to connect to the network. However, it should be noted that the network environment varies from city to city, especially in some remote areas, and the network signal may be affected. At this point, you need to check your local network coverage and adjust or replace your router accordingly.

In addition, it is also necessary to note that there may be differences between network operators in different cities, and different operators provide different services, and the router may need to be set up or adjusted accordingly to adapt to the local network environment. In short, you only need to use the same telecom service in different cities to use the same router. However, it is necessary to pay attention to the local network coverage and the differences of operators, so that Qingyin can make corresponding adjustments and settings.

Oh,This is not a router,It's a wireless smart cat given by Telecom,You can connect a wireless router in the back to use,But you can't replace it。

In fact, you can use any router, but since he has already told you that you can't change it, it's best not to change it, if you change it, it will affect the Internet.

Dear Telecom users, Hello!

According to your description, the wireless cat that is given by the telecom installation broadband cannot be replaced, and if you are not satisfied with its wireless network coverage, you can buy a separate router to connect to the router to use.

Thank you for your attention to telecom products, I wish you a happy life, if you have any questions, you can consult Anhui telecom companies to know the platform, we will answer you wholeheartedly.

The router given by the telecom company can be replaced with another router, and it is recommended to replace it with a wireless router.

Telecom modem can be connected to the wireless router to achieve wifi coverage, and networked devices can access the Internet through wifi.

Wireless router and modem connection configuration method:

1.A wireless router is connected to the network.

2.The system is connected to the router.

Turn on the wifi of the computer, search for the default wifi name of the router (the nameplate on the back of the router is written), and connect to the wifi network. The first time you use the router, you generally don't need to enter the wifi password.

3.Go to the gateway page.

Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface. (This interface will pop up automatically for new routes).

4.Set up a way to access the Internet.

Go to the WAN port settings in Advanced settings. If the broadband service requires dial-up, select PPPoE dial-up, otherwise you can choose DHCP to get automatically. To dial up PPPoE, enter the broadband account password, and select Automatic connection as the connection mode.

If DHCP is automatically obtained, you do not need to enter this field.

5.Set the wifi name and password.

Go to Wireless Security in the Wireless Settings and select WPA2-PSK mode for Security Mode. Select AES for WPA encryption rule. Set up a wireless network key. The router will automatically restart after setting, please enter a new wifi password to connect.

6.The configuration is complete and you can enjoy the network.

No, the telecom gives the fiber optic cat, but only with part of the routing function. If you feel that the wifi signal is not good, you can connect a wireless router after the fiber optic modem.

You can change to another route. The original is optical transceiver + routing. Then the change can only be the same, and it needs to support optical port access. You need to ask Telecom for optical port parameters or ask them to set them.

You can't change it. Because optical access is not supported.

It can be accessed using Level 2 routing or AP mode.

Fiber optic cable --- the terminal given by telecom --- your good route wifi device.

It is enough to add a route, and the telecom is used to convert optical signals into electrical signals.

In fact, wifi coverage will not make much difference even if you change routes, national radio regulations, civilian equipment is not allowed to exceed 100MW of power, not much worse, if you want to expand the range, only to increase the way of wireless nodes.

Yes, in fact, you don't need to change it, just buy a router and install it.

Hello, the device should be a telecom broadband cat, the telecom broadband cat generally cannot be replaced by itself, if it is an ordinary router, it can be replaced by itself.

You can change it, just change it to a router and reset the Internet information.

You first determine whether the telecom is sending a cat or a router, if it is a cat, you can't change it yourself.

If it's a router, you can change it if you can set it up yourself.

Of course I can.

Buy a tplink, connect the WAN port to the operator line, connect the LAN port to the computer web page to enter, the account admin password admin into the configuration wizard, step by step configuration.

It can be changed, to avoid conflicts caused by the same IP address, if you use the routing function, you can only dial the number once, so it will cause you to be able to surf the Internet, but you can't **IPTV.

If you want to use a wireless router and set up automatic dialing for a wireless router, the network cable of the IPTV set-top box must be plugged into the wireless modem, but not connected to the wireless router, otherwise the IPTV service will not be available.

If this does not work, it is recommended that you check with your local operator.

Try a better route!! Gigabit LAN !!