How much does a 50 CNC lathe cost a day? 50

Because your question is vague, let's make some assumptions: suppose you are using a 6136 or 6140 ordinary or CNC lathe; What I hope to know is how many pins with a diameter of 50 and a length of 148 can be produced by this lathe in a day (8 hours); The blank used is a 50 diameter bar and is made of ordinary carbon structural steel or high-quality carbon steel.

There are too many types of CNC machine tools, such as CNC lathes, CNC milling, turning and washing centers, machining centers, gantry washing to tell you the simplest solution CNC lathe: including about 3w of optical machine: optical machine contains the entire bed, lead screw, tailstock Then you need a set of CNC system:

Generally, there are more domestic ones with Guangzhou CNC, CNC system 980TDB, drive DA98B, motor.

Solution: (1) y=-2x2 40x-98,x n* 2) is solved by -2x2 40x-98 0, 10- 51 x 10 51 , and x n*, so x=3,4,,17, so profit from the third year (3) by y x =40-(2x 98 x) 40-2 2 98 =12, if and only if x=7 the "=" sign holds, so the total profit is -2 72 40....

Summary: CNC lathes are generally between 7 and 100,000 yuan, and CNC lathes of different brands and sizes are different. Generally, go to the CNC factory for customization.

CNC lathe is one of the most widely used CNC machine tools. It is mainly used for the cutting of the inner and outer cylindrical surfaces of shaft parts or disc parts, the inner and outer conical surfaces of arbitrary taper angles, the internal and external curved surfaces of complex rotation, cylindrical and conical threads, and can be grooving, drilling, reaming, reaming and boring.

CNC machine tools have the following characteristics:The machining accuracy is high and the processing quality is stable.

Multi-coordinate linkage is possible, and parts with complex shapes can be processed.

When the machined parts are changed, it is generally only necessary to change the CNC program, which can save production preparation time.

There are too many companies operating CNC lathes, mainly depending on what you are ready to buy in **, even if it is the same equipment, each region is different, I am from Yan'an, Shaanxi, in April from Dongyue Machine Tool that bought a 6150 and a 6163 CNC lathe, bought Dalian Machine Tool Factory, good quality, cost-effective, if you are from the five northwest provinces, you can ask them, I hope it will help you, hope to adopt.

First of all, it is clear what material the lathe is used for.

Second, it is clear what precision you need to machine.

Again, be clear about how long you want to use it (machine life, including machine accuracy life) and finally, how much money you have in your hands.

Take CK6140X750 as an example, metal turning machine tools.

About 10,000, basically rough car.

2. Left and right, complete the basic turning processing and precision guarantee.

3. Above, high configuration, general large factory.

40,000 to 100,000 have, mainly depending on your use, imported machine tools are expensive, but relatively stable, domestic brands are also catching up, ** has advantages .........

There are more than 40,000 to 60,000 cars and wood, and the difference between metal parts is even greater.

Alibaba has it, you can go and see it. Go and see the cloud carving engraving machine.

600,000 He Chunbi - 800,000. According to the query of relevant information, a CNC lathe can earn 15-200,000 yuan a year, because the working time of a CNC lathe is 60-80 an hour, and it is 15-200,000 yuan a year. Zen Qin, so four sets of Senzai control lathes can earn 60-800,000 a year.

As of February 2020, ** is 10,000 yuan.

Ordinary lathes can be used for a variety of processes to process various types of workpieces such as shafts, discs, rings, etc., and are often used to process the internal and external rotating surfaces, end faces and various internal and external threads of workpieces, using corresponding tools and accessories, and can also be drilled, reamed, tapped, and knurled.

The rotary motion transmitted by the main motor passes through a series of speed changing mechanisms to make the spindle get the different speeds of the required forward and negative steering, and at the same time, the spindle box distributes part of the power and transmits the motion to the feed box. The middle spindle of the headstock is a key part of the lathe. The smoothness of the spindle running on the bearing directly affects the machining quality of the workpiece, and once the rotation accuracy of the spindle is reduced, the use value of the machine tool will be reduced.

CA series ordinary lathes This series of lathes are suitable for turning internal and external cylindrical surfaces, conical surfaces and other rotating surfaces, turning various metric, inchal, modulus and diameter threads, and can carry out keyholes, reaming holes and oil grooves. CA series products, the bed is wider than the general lathe, with high rigidity, the guide rail surface is quenched by medium frequency, and it is wear-resistant. The operation of the machine tool is flexible and concentrated, the slide plate is equipped with a fast-moving mechanism, and the visualization operation of a single handle is adopted, which is pleasant.

The structural stiffness and transmission rigidity of the machine tool are higher than those of general lathes, and the power utilization rate is high, which is suitable for powerful high-speed cutting. The spindle bore is large, and the optional accessories are complete.

Main Technical Specifications CA6140CA6240CA6150CA6250CA6161CA6261 Rotation diameter on the bed: 400mm(16in)500mm(20in)610mm(24in)Rotation diameter on turret: 210mm (slewing diameter in saddle*Effective width: 630mm(25in)*210mm 720mm(28in)*210mm 830mm(33in)* 210mm, the distance between the two centers, 750, 1000, 1500, 2000mm (30, 40, 60, 80in), spindle through hole diameter and spindle head formation, 52 or 76 or 80mm and A16 C8 or D8, bed guide rail width and hardness, 400mm and RC52**, between 10,000 yuan.

It depends on what factory you need to produce CNC lathes, what specifications and models, what CNC system, these factors all determine the level of the first, if you want to choose Shenyang machine tool, you can contact the Shenyang machine tool factory sales office 024---25655681 or add my number 253475645

There are several reasons why you can make money selling CNC cars:

1.CNC lathes are high-end mechanical equipment, which is relatively high. As a result, every sale can lead to higher profits.

2.The market demand for CNC lathes is large, especially in the field of manufacturing and machining. With the continuous upgrading and innovation of technology, the market demand for CNC lathes is also getting higher and higher.

3.The after-sales service of CNC lathes is also very important. Because CNC lathes need frequent maintenance and maintenance, the quality and efficiency of after-sales service will also affect sales performance.

4.The sales of CNC lathes often need to carry out technical exchanges and provide solutions, because this requires certain technical ability and professional knowledge. Skilled salespeople can provide better sales and after-sales services, thereby increasing customer satisfaction and loyalty.

Summary. Hello dear! The following answers to your question about [how much money can you earn a year by investing in a CNC machine tool factory].

Investing in CNC machine tool factories can earn 150,000-200,000 yuan a year. CNC machine tool (computer numerical control machine tools, digital control machine tool) is an automatic machine tool equipped with a program control system, which can make the machine tool move and process parts according to the programmed program. CNC machine tool integrates mechanical, automation, computer, microelectronics and other technologies to solve the processing problems of complex, precise and small batch parts, and is a flexible and high-efficiency automatic machine tool.

How much money can you make a year by investing in a CNC machine tool factory.

Hello dear! For the question you asked [how much money can you earn a year by investing in a CNC machine tool factory], do the following answers: Investing in a CNC machine tool factory can earn 150,000-200,000 yuan a year.

CNC machine tool (computer numerical control machine tools, digital control machine tool) is an automatic machine tool equipped with a program control system, which can make the machine tool move and process parts according to the programmed program. CNC machine tool integrates mechanical, automation, computer, microelectronics and other technologies to solve the processing problems of complex, precise and small batch parts, and is a flexible and high-efficiency automatic machine tool.

CNC machine tools have the characteristics of strong adaptability to the processing object, high processing accuracy, stable processing quality, high productivity, high reliability, and improved labor conditions. With the rapid development of China's industrial technology, the development technology of intelligent CNC machine tools has gradually matured. The intellectualization of CNC machine tools is the inevitable trend of the development of China's machine tool work, and the application of CNC machine tools in industrial production can effectively improve the level of industrial production in China and ensure the accuracy of internal detection of machine tools.

The operation and monitoring of the CNC machine tool are all done in this CNC unit, which is the brain of the CNC machine.