How to increase the temperature of the thermostat of the wall hung boiler?

The thermostat is as convenient and durable as the remote control of an air conditioner.

Bonoan wall-hung boiler is with a thermostat, send a ** to you.

The correct way to adjust the thermostat of the wall-hung boiler:

1. There are 2 temperature adjustment buttons on the thermostat, one is to adjust up, the other is to adjust down, the highest can be adjusted to 85°, and the lowest is 35°.

2. If the room where the wall-hung boiler is installed is large, it is recommended that you lower the valve of the uninhabited radiator, which can reduce the loss of gas.

3. Of course, if it is uninhabited, it is best to close the radiator valve directly, which can play an energy-saving role and do not consume too much gas.

Benefits of installing a wall-hung boiler thermostat:

1. Gas saving: A very important reason why the wall-hung boiler needs to install a thermostat is to save gas. With accurate room temperature control, coupled with the time period setting, the heating furnace operation can be controlled independently, and there is no need to burn gas for heating day and night, so the gas saving effect is obvious.

2. Comfort: Of course, there is another benefit to installing a wall-hung furnace thermostat, that is, comfort. For example, the room temperature is automatically adjusted at different times, so as to avoid the embarrassing situation of waiting for the room to heat up and get frozen after returning home.

3. Convenient: Automatically set the wall-hung boiler to switch on and off in advance or delayed every day, saving the trouble of manual operation, and it is still necessary to install a thermostat for office workers.

4. Worry-free: When the room temperature is too low, if you want to forcibly open the wall-hung boiler, you need a small amount of gas to safely carry out indoor anti-freezing protection.

You can follow the steps written in the manual, and you can operate according to the steps, or you can connect to the mobile phone network through the thermostat and change the temperature through the mobile phone settings.

I think the temperature should be set at around 20 23 degrees, which makes people feel more comfortable.

If you want to set the temperature of the wall-hung boiler, you can check the manual, learn systematically, or learn some operation skills on the Internet.

The wall-hung boiler is our heating equipment in winter, so how to adjust the thermostat of the wall-hung boiler? Now, let me talk about it.

On the panel of the wall-hung boiler thermostat, there are only two buttons to adjust the temperature, one is to adjust the temperature upward, and the other is to adjust the temperature downward, the highest temperature that can be adjusted is 85 degrees, and the lowest is 35 degrees;

If the house where the wall-hung boiler is installed, you can lower the radiator valve in the uninhabited room, which can reduce gas consumption;

Of course, if there is no one, it is better to close the radiator valve directly, so that it is completely energy-saving and does not consume unnecessary gas;

The above ** is from the web.

Hello dear, I'm glad to answer for you, the correct way to adjust the thermostat of the wall-hung furnace is: 1. LCD programmable thermostat. The (comfortable) temperature can be set for up to 7 days, and up to 6 time periods per day, which can be adjusted at any time.

If it is not changed after 7 days, it can be automatically recycled. 2. Manually adjust the simple thermostat. The advantage is that it is cheap, and the temperature can be accurately controlled (directly adjust the temperature and pressure knob adjustment on the furnace is fuzzy to adjust to the required temperature can only be tried slowly), the disadvantage is that the temperature cannot be predetermined, and it is easy to break (such as poor contact with the side).

3. Liquid crystal programmable type. For example, as soon as you go to work in the morning, the wall-hung boiler will shut down by itself, and you will arrive home at 6 o'clock in the afternoon, and the wall-hung boiler will start running by itself at 5:40, and when you walk into the house, it is already a room temperature of 25 degrees Celsius. When you fall asleep, the room temperature automatically jumps to 20 degrees Celsius, all of which you preset.

The wall-hung boiler temperature controller is suitable for controlling the wall-hung boiler heating system. Its working principle is the thermal element on the thermostat, the resistance changes with the temperature, by detecting the room temperature and the comparison of the set temperature, when the resistance changes to a certain calibration value, the relay can switch the action, and the output controls the start and stop of the wall-hung boiler.

LCD programmable thermostat: You can set the (comfort) temperature mode for up to 7 days, and you can set up to 6 time periods per day, which can be adjusted at any time. If it is not changed after 7 days, it can be automatically recycled.

Manual adjustment of simple thermostat: The advantage is that it is cheap, and it can accurately control the temperature (the adjustment of the temperature pressure knob on the furnace directly is fuzzy, and the adjustment to the required temperature can only be tried slowly), and the disadvantage is that the temperature cannot be predetermined, and it is easy to break (such as poor contact).

Manual mechanical diaphragm cassette: marked with antifreeze 5 10 15 20 25 30, just like the air conditioner, you can adjust a temperature at will, and the room will be kept at this temperature.

The thermostat is equipped with a temperature adjustment knob (or button), and the user can directly adjust the temperature through the temperature adjustment knob.

According to the temperature change of the working environment, the thermostat undergoes physical deformation inside the switch, resulting in some special effects and a series of automatic control components that produce on-on or off-action actions, also known as temperature control switches, temperature protectors, and temperature controllers, referred to as thermostats. Or the temperature is transmitted to the temperature controller through the temperature protector, and the temperature controller issues a switch command to control the operation of the equipment to achieve the ideal temperature and energy saving effect.

The wall-hung boiler temperature controller is suitable for controlling the wall-hung boiler heating system, its working principle is the thermist-sensitive element on the thermostat, the resistance changes with the temperature, through the comparison of detecting the room temperature and the set temperature, when the resistance changes to a certain calibration value, the relay can switch the action, and the output controls the start and stop of the wall-hung boiler.

The temperature range is generally 18 --28.

The working principle of the wall-hung boiler thermostat is the thermal element on the thermostat, the resistance changes with the temperature, through the comparison of detecting the room temperature and the set temperature, when the resistance changes to a certain calibration value, the relay can switch and stop, and the output controls the start and stop of the wall-hung boiler.

On the panel of the wall-hung boiler thermostat, there are only two buttons to adjust the temperature, one is to adjust the temperature upward, and the other is to adjust the temperature downward, the highest temperature that can be adjusted is 85 degrees, and the lowest is 35 degrees; If the house where the wall-hung boiler is installed, you can lower the radiator valve in the uninhabited room, which can reduce gas consumption;

If there is no one at home, it is best to close the radiator valve directly, so that it is completely energy-saving and does not consume unnecessary gas, if there is no one at home, do not turn off the wall-hung boiler thermostat, you can adjust the temperature to the lowest, because the boiler is turned off and turned on again, and more gas is consumed.

Once you install a thermostat in your home, the wall-hung boiler is preferentially run according to the thermostat, that is, the room temperature is operated, it ignores the water temperature you set, provided that you set a high water temperature, such as 60 degrees, higher than 60 is also not extinguished, and the flameout is not determined by the temperature difference. You just set the room temperature and the water temperature, and you don't care about the temperature difference.

Hello, my home is also Wanjiale wall-hung boiler, just installed thermostat, how many degrees do you set the room temperature now? What is the water temperature? How much gas can I save?