After the computer crashes, it emits a continuous short tone when it is turned on

Updated on number 2024-03-27
6 answers
  1. Anonymous users2024-02-07

    Haha,My desktop machine also encountered such a situation some time ago.,It may be a problem with the graphics card.,Or a memory problem.,It is recommended that you go to the after-sales service hehe。

  2. Anonymous users2024-02-06

    I can't say for sure, it could be a problem with the power supply or a problem with the motherboard chip. It's best to take your power supply and change the machine to see if it's normal.

  3. Anonymous users2024-02-05

    5 Short **Processor (CPU) error. Check if there is a problem with the CPU socket, and if there is no problem, put the CPU on another motherboard and try to see if it is normal.

    Computer abnormal alarm sound:

    1. Short: Memory flush failed.

    2. Short memory ECC verification error.

    3 Short System base memory (first 64kb) check failed.

    4. Short: The system clock is wrong.

    5 Short **Processor (CPU) error.

    6 Short Keyboard controller error.

    7. Short: The real mode of the system is wrong and cannot be switched to protection mode.

    8 Short: Shows a memory error (shows that the memory may be broken).

    9. Short ROM BIOS checksum error.

    1 long 3 short memory error (memory corruption, please replace).

    1. Long 8 short display test error (the monitor data cable is loose or the graphics card is not plugged in steadily).

    Award (Phoenix) BIOS Alarm Sound Meaning (Version number is different from old to new, and the meaning of the alarm sound is different).

    No alarm sound: There may be a problem with the power supply, motherboard, or PC speaker. Check whether they are in contact with each other or replace the corresponding parts.

    1 short tone: This is the normal tone.

    2 short tones: Caused by the wrong CMOS setting, re-set the CMOS, generally call the default settings.

    1 long and 1 short: The memory and motherboard are faulty, which is generally a compatibility problem, and the memory is replugged and unplugged.

    1 long and 2 short: The display is wrong, generally because the graphics card is in poor contact with the AGP slot, or the display data is connected at the end, or it may be that the graphics card or video memory is physically damaged.

    1 long and 3 short: The keyboard controller is incorrect, first try to change the keyboard.

    1 long 9 short: Motherboard flashram or EPROM error (BIOS chip is damaged), try to replace or re-flash.

    Long ringing: The memory module is inserted at the end or is not in good contact, it has been damaged, and the memory is re-inserted or replaced.

    Ringing: The power supply and the monitor are not properly connected to the graphics card.

    Repeat Short Ring: Power.

    No Sound No Display: Power.

  4. Anonymous users2024-02-04

    There's a virus in your computer!! Causes a system abnormality!!

  5. Anonymous users2024-02-03

    Is your problem solved, is the monitor not displaying.

  6. Anonymous users2024-02-02

    The graphics card is not plugged in...The memory is not plugged in. It's as simple as that.

Related questions
43 answers2024-03-27

As mentioned above, the crash is caused by hardware or software. >>>More

14 answers2024-03-27

Remove the system, implicit and read-only attributes of the Chinese part of the C drive. >>>More

14 answers2024-03-27

Unplug the console and press the console power onkey a few more times. >>>More

7 answers2024-03-27

According to your description, it should be a problem with the operating system, just follow 4; If it doesn't work, it may be a problem on the motherboard, first check the battery of the motherboard; Then check the memory chip, the most common failure is that the content in the EPROM is damaged or lost, and the re-flashing BIOS is invalid, and the chip can only be replaced; >>>More

8 answers2024-03-27

Workarounds for malfunctions such as game cards or freezes: >>>More