Which is durable, emery floor or hardened floor?

Of course, hardened flooring is more durable.

Emery flooring is usually used in machinery manufacturing, electronics, food, medicine, textile, warehousing, logistics, supermarkets, public utilities and other industries will choose this kind of ground according to their needs. Ordinary corundum flooring improves the performance of the floor and prolongs the service life of the floor, which has been recognized by many enterprises; However, after a period of use, different degrees of dust, sand, hollowing, after several years of use, under the action of the forklift, the ground will still inevitably appear different degrees of sand, dust, hollowing, manifested as tortoise, cracking, chemical corrosion resistance, impermeability, expansion joints are easy to crack and crack, and the effect is not good after repair. With the increase of service life, coupled with the effects of carbonization, water erosion and weathering, the surface of the floor will continue to be pulverized, affecting normal use.

Emery floor ash is manifested in the surface layer strength is not enough, not wear-resistant, hardness is not enough, after a long period of use, the ground will produce a lot of dust, how to clean can not be clean, the ground has no gloss. Curing floor is the original emery floor with concrete sealing curing agent polishing, through a series of complex chemical reactions, can be low-strength, loose emery floor surface solidification into a hard, dense whole, so as to improve its hardness, wear resistance, impermeability, etc., the treated ground its hardening, dust-proof effect is permanent.

Emery wear-resistant floor is based on concrete floor, and then sprinkled with a layer of emery material, its hardness is definitely higher than that of cement floor. The hardened floor is based on the original concrete, through the use of Litk concrete sealing and curing agent, the basic structure of the concrete is changed, and the capillary pores on the concrete surface are closed, which is equivalent to the secondary construction of the concrete floor, so that the concrete floor forms a more solid whole, thereby increasing the hardness and wear resistance of the floor. Therefore, Litke believes that in terms of floor hardness, the hardness of hardened flooring is indeed greater than the hardness of corundum wear-resistant flooring.

1.Comparison of wear resistance of emery and epoxy flooring: the wear resistance of emery wear-resistant flooring is better than that of epoxy flooring, because the raw material of the former stone is emery aggregate, while epoxy is made of paint material;

2.Comparison of dust-free properties of emery and epoxy flooring: Epoxy flooring is an overall beautiful ground, which has higher requirements for the flatness of the ground, and it is suitable for dust-free and sterile occasions, and it is better dustproof than emery wear-resistant flooring;

3.Comparison of durability of corundum and epoxy flooring: the capillary pores of the ground concrete after the construction of corundum wear-resistant floor are reduced, which can make the ground wear-resistant and compressive, while the epoxy floor has poor wear resistance and is easy to be polluted by the penetration of external substances, so its life is shorter than that of corundum wear-resistant floor, and it needs to be repaired and maintained frequently;

4.Comparison of the convenience of corundum and epoxy floor: the ground after the construction of epoxy floor needs to be protected, and can not receive scratches from sharp objects, and the construction is cumbersome and the construction period is long, while the emery wear-resistant floor has a short construction period, fast construction, and the ground has a certain wear resistance.

How to do emery flooring, through the above ground construction practices, we can see that the construction of corundum flooring is similar to the general floor construction, but the floor materials used are somewhat different, and this kind of floor also needs to be oxidized in order to have a better ground effect. The difference between emery floor and epoxy floor is quite big, and their corresponding ground direction is different.

Micro krypton epoxy floor paint and emery wear-resistant flooring have their own characteristics.

Emery is wear-resistant like a cement floor, but its strength is higher than that of a cement floor, and it will ash like cement over time. It is also possible to do colors such as gray and green. It is not good-looking and durable.

Epoxy floor paint, with diverse and bright colors and high cleanliness, looks more high-end, belongs to classic products, and is not high.

Both are actually floor treatment methods, but the two are very different, wear-resistant flooring is also called emery flooring, which is to sprinkle a layer of emery aggregate on the surface after concrete pouring to strengthen wear resistance. Cured flooring, also known as hardened flooring, is penetrated into the interior of concrete by sealing the curing agent of concrete, and the internal structure of the concrete is changed through the reaction of the material, thereby increasing the hardness and gloss. There is also a big difference in the construction process between the two.

Concrete seals curing agent floors

Wear-resistant floor: During construction, the wear-resistant aggregate is completely penetrated into the concrete surface, and the construction is synchronized with the concrete. After the construction is completed, it is integrated with the concrete, and the final product is what the concrete looks like.

However, at this time, the concrete will not have the original problems that are easy to appear, such as: weathering, pulverization, oxidation, rough surface, easy dusting, acid and alkali resistance, oil resistance, etc.

Emery wear-resistant flooring

Concrete sealing curing agent floor: construction must wait for the concrete to fully solidify before construction, before construction must ensure that the concrete is completely dry, generally after concrete construction curing for about 20 days before the construction of the curing agent. The curing agent completely penetrates into the concrete and merges with the concrete, and the final product is also the original concrete as it was.

However, at this time, the concrete has formed a dense whole, resistant to permeability, compression, wear, acid and alkali salt corrosion, no ash, no maintenance and maintenance.

In today's construction, many customers choose to combine the two types of construction, that is, the wear-resistant floor and the curing agent are applied together to form a denser solid, with stronger performance and longer service life.

1.Abrasion resistance:The wear resistance of corundum wear-resistant flooring is better than that of epoxy flooring, because the raw material of the former stone is corundum aggregate, while epoxy uses paint materials;

2.Dust-free:Epoxy floor is a kind of overall beautiful ground, the flatness of the ground is required to be higher, it itself is suitable for dust-free, sterile occasions, he is better than the emery wear-resistant floor, dustproof;

3.Durability:The concrete pores of the ground after the construction of the emery wear-resistant floor are reduced, which can make the ground wear-resistant and compressive, while the epoxy floor has poor wear resistance and is easy to be polluted by the penetration of external substances, so its life is shorter than that of the emery wear-resistant floor, and it needs to be repaired and maintained frequently;

4.Convenience:The ground after the construction of epoxy floor needs to be protected, can not receive the scratch of sharp objects, and the construction is cumbersome, the construction period is long, and the construction period of corundum wear-resistant floor is short, the construction is fast, and the ground has a certain wear resistance.

Advantages of emery flooring:1. The surface of the emery floor is compact, not easy to dust, and easy to clean.

2. Replace traditional industrial ground terrazzo.

3. Synchronous construction with concrete, which can be quickly put into use;

4. Low cost and high cost performance. Long time of use.

5. Good wear-resistant, impact-resistant and compressive properties;

Emery floor disadvantages:1. Limited color options: commonly used cement primary colors, gray, green, red, etc.

2. Some low-quality colored (such as green) wear-resistant floors will fade in a short period of time 3. Poor permeability resistance: Wear-resistant floors belong to high-strength concrete types, and its permeability resistance is far less than epoxy flooring.

4. It cannot resist the corrosion of chemicals: the inorganic silicate contained in it is the main chemical component, which is easily corroded by acid and alkali.

5. The surface finish is worse than that of epoxy flooring, especially the poor quality may also cause ashing, so it is not suitable for floors with high cleanliness requirements.

Epoxy flooring is also known as epoxy flooring, epoxy flooring, epoxy floor paint, epoxy floor paint, epoxy flooring, epoxy flooring. Epoxy resin flooring is composed of high-performance epoxy resin main agent and curing agent, with special machinery and auxiliary materials, and formed by on-site construction by professional construction personnel.

Advantages of epoxy resin flooring:

1. The whole is seamless, completely dust-free, easy to clean, and can meet the requirements of high-cleanliness industrial plants;

2. The color can be arbitrarily selected and matched, and the aesthetics are excellent;

3. Waterproof, mildew-proof and impermeable;

4. Highly wear-resistant, can walk heavy vehicles; It has good toughness, and does not delaminate or crack when impacted;

5. It is firmly bonded with the base layer (concrete, ceramic tile, metal, etc.), and under the premise of construction quality assurance, it will not be delaminated or opened. Crack.

6. Resistant to a certain degree of chemical corrosion.

Emery wear-resistant floor disadvantages:

1. Can not resist heavier underground moisture: epoxy resin floor because of its molecular structure is extremely dense, underground moisture can not penetrate, if the ground concrete base on the first floor is not made of moisture-proof isolation layer, once the underground moisture is too heavy, it is easy to jack up the epoxy floor coating, and a bulge will be formed in the early stage, and then it will crack and fall off.

2. Poor scratch resistance: epoxy resin floor coating has poor ability to resist scratches of various sharp and hard objects such as sand particles and iron filings. Therefore, the floor of the workshop where the epoxy floor is constructed must always be kept clean.

3. Poor high temperature resistance: the maximum withstand temperature of the general epoxy floor coating is about 80 degrees Celsius. In some workshops where vehicles walk more frequently, when the vehicle is driving too fast, once there is a sharp braking or sharp turn, the epoxy floor coating will be softened due to the short-term high humidity caused by sharp friction, and the dust on the vehicle tires will penetrate into the inside of the epoxy floor coating, resulting in local epoxy floor coating abrasion and discoloration.

This damage cannot be completely removed with organic solvents or other cleaning agents, and the only solution is to repair it locally.

4. Poor weather resistance: epoxy resin flooring has poor ultraviolet resistance and cannot be used outdoors for a long time, otherwise it will accelerate aging, such as discoloration, reduced strength, and even chalking, delamination, etc.

Emery wear-resistant flooring material is a factory-ready-mixed, on-site, dry-sprinkled floor hardener. It is mainly composed of high-strength cement, inorganic wear-resistant aggregate, pigment powder (cement primary color is none), additives, etc. The aggregate is sandy, with an average particle size, accounting for about 60% of the total; The cement is treated high-grade cement, in addition to the natural color of cement, there are red, yellow, green, gray and other colors to choose from.

The hardener aggregate component is natural ore. It is a non-metallic aggregate that is not rusty, and its hardness is above 8 degrees on the Mohs scale. In addition to natural ore aggregates, the weight of other cement, pigments, etc. shall not exceed 25% of the total weight.

Advantages of corundum wear-resistant flooring:

1. The color is optional, the surface is dense, not easy to dust, and easy to clean.

2. It is a substitute for traditional industrial ground terrazzo.

3. Synchronous construction with concrete, which can be quickly put into use;

4. Low cost and high cost performance. Long service life.

5. Excellent wear resistance, impact resistance and compressive performance;

Emery wear-resistant floor disadvantages:

1. There are certain limitations in color selection: the commonly used colors are only cement primary color, gray, green, red, etc.

2. Some low-quality colored (such as green) wear-resistant floors will fade in a short time.

3. Even if it is a color wear-resistant floor, its color cannot be as pure and saturated as an epoxy floor;

4. Poor permeability resistance: wear-resistant floor is actually a kind of high-strength concrete, its permeability resistance is far less than epoxy flooring, for some workshops that often have oil stains, such as machining workshops, etc., oil stains are easy to penetrate into the inside of the floor, resulting in inability to be thoroughly cleaned.

5. It cannot resist the corrosion of chemicals: the chemical components based on inorganic silicates are easily corroded by acids and alkalis.

6. The surface finish is far less than that of epoxy flooring, especially the wear-resistant flooring with poor quality may also cause dust, so it is not suitable for floors with high cleanliness requirements.

The application of Jingang grinding floor is very extensive, and our common underground parking lots, industrial plants and other places are used. This kind of floor has many advantages, not only hard and wear-resistant, the ground is non-slip and clean, and the surface is also very beautiful and generous, or a more practical floor decoration design. What are the advantages of corundum wear-resistant hardened flooring?

What are the disadvantages of corundum wear-resistant flooring? Let's take a look

What are the advantages of corundum wear-resistant hardened flooring

1. The color of corundum wear-resistant floor material is very rich, divided into emerald green, bright red, light yellow and dark gray.

2. Emery wear-resistant floor has the characteristics of hard and wear-resistant, anti-fouling and meticulous, if the ground is paved with this material, until it is dry, it will produce a very tight surface. Therefore, this material is also widely used in underground parking lots, warehouses, and other places where the road surface must be protected.

3. This kind of floor is not easy to accumulate dust, and it is moisture-proof, and belongs to the clean wooden floor, so it is easy to clean up the beams.

4. Emery wear-resistant flooring can be applied to a variety of sites, and it can be used in our common commercial blocks, underground parking lots, and even factories, warehouses and other places. In addition, it has a long service life and is more advantageous than raw materials at the same price.

5. It has a very high cost performance, although it has many advantages, but it is not very expensive, and many flooring materials are more expensive than it, but the characteristics are far inferior to it.

What are the disadvantages of corundum wear-resistant flooring?

1. Although the color of this kind of floor raw material slag is varied, some of the colors have the problem of fading, such as emerald green, which will fade in a short period of time.

2. As a high-strength concrete, the penetration resistance of corundum wear-resistant floor is not strong, if it is used in areas where oil stains often appear, such as machinery manufacturing plants, it will cause oil stains to penetrate into the internal structure of the floor, which is not only difficult to clean, but also continues to destroy the beauty of the road surface.

3. Inorganic silicate, the main component of corundum wear-resistant floor material, will produce anti-harmony and rust when it encounters strong acids and alkalis, so this material cannot resist chemical corrosion.

4. The surface smoothness level of this material is not as good as that of epoxy flooring, especially the poor quality corundum wear-resistant floor material, and even dust accumulation will occur, which is more troublesome to remove, so it is not suitable for areas with high cleaning requirements.