How can an air conditioner be shared between two rooms?

The air conditioner is installed in one of the rooms, and two changing fans are installed on the partition wall in the two rooms, one is blowing in the forward direction and the other is blowing in the reverse direction, so as to realize the air exchange and air exchange in the two rooms.

Install air ducts for the air conditioner outlet and channel the air outlet into the two rooms separately.

Install a large area of similar shutters on the partition wall between the two rooms.

The open windows connect the temperature fields of the two rooms.

Precautions for the use of air conditioners:

The shell of the indoor unit should be cleaned frequently, generally wiped clean with a clean dry cloth or wiped with neutral detergent, and it is absolutely not allowed to rinse directly with water, and if you use a cloth to wipe, it should also be carried out after the power is off.

The indoor temperature should not be adjusted too low, otherwise it will be detrimental to the human body, and the set temperature should be adjusted appropriately.

If you feel that the indoor temperature is too high, you can lower the set temperature appropriately.

The effective use of the timer can achieve both energy saving and comfort.

There should not be too many people in the air-conditioned room, too crowded, otherwise the cooling capacity will be insufficient, and the temperature will be difficult to drop.

The doors and windows of the room should not be opened and closed frequently, and personnel should not enter and exit frequently, so as to avoid the loss of air conditioning.

The glass windows must be closed tightly and tightly, and double white curtains should be hung inside to reflect some of the light and heat penetrating through.

It's a good idea, but because the indoor air conditioner and the outdoor unit have connecting lines, lengthening the lines will affect the cooling effect, and the actual implementation is a bit troublesome. Open the shared wall (upper half), directly hang the wall-mounted air conditioner in a room that often uses air conditioning, and it is more feasible to realize the common cooling of the room.

According to your method, use the cabinet to drag and rotate (add ground and wheel) to realize the cooling of two rooms separately, or install a wall-mounted air conditioner in each room.

The requirements are not low, the shared air conditioner instead of the shared air conditioner, it should be able to be used separately. It's not impossible, but the separation design takes up a lot of space, not necessarily beautiful, and there are costs, which is more toss-up, and I am afraid that I am not necessarily willing to toss.

There is a zero-power tent air conditioner on the Internet, which allows you to use one air conditioner in two rooms in your home, just like a one-to-two air conditioner. It allows the air-conditioned room to ventilate and allow the person in the next room to blow the air-conditioner for free.

You have to give 300 points to answer this question.

Method: 1. We first prepare a hanging air conditioner to be used, check whether the functions are complete, whether the switch is stable, the most important thing is to clean the air conditioner, and after the inspection, you can measure the size of the air conditioner (shouting to take the accurate size);

2. Then dig a boxy hole at the top of the wall that is about to be shared, don't dig too big at the beginning of the jujube rent, first dig a small position (similar to a fist-sized hole);

3. Expand and correct the hole according to the size of the air conditioner, so that the hole is larger than the size of the air conditioner, not smaller than the size of the air conditioner.

4. Then install the air conditioner according to the convention, and pass the air conditioner through this hole, half of each room;

5. This is the other half of the air conditioner in another room, and after it is turned on, two adjacent rooms can share a hanging space.

To realize the sharing of two rooms with a hanging air conditioner, the following methods can be considered: 1Installing the duct system:

Installing an air duct at the air outlet of the hanging air conditioner and extending the air duct to another room can realize that two rooms can share an air conditioner. 2.Installation of split system air conditioners:

Replace the hanging air conditioner with a split air conditioner, install the outdoor attendant machine and the indoor unit in two rooms respectively, and connect them through pipes, so that the two rooms can share an air conditioner. 3.Install a multi-split air conditioner:

Multi-unit air conditioners can be connected to multiple indoor units and one outdoor unit, and two rooms can be cooled or heated by one outdoor unit. It should be noted that the above methods need to be considered when installing the air conditioner, if the hanging air conditioner has been installed, if you want to share the two rooms, you need to reinstall or replace the air conditioner. At the same time, it is necessary to choose the right type and power of air conditioner according to the room area and usage needs.

If you want a hanging air conditioner with two rooms shared, you can consider the following two options:

Installation of air duct system: Through the installation of air duct system, the cold and hot air of the air conditioner are transported to the two rooms through the pipe to achieve sharing. This solution needs to reserve the installation position of the air conditioning duct, and at the same time need to consider the length of the air duct, ventilation effect, noise and other issues.

Installation of split air conditioner: To install a split air conditioner, Qi Jianrang installed the outdoor unit outdoors, and the indoor unit was installed in one of the two rooms, and the two rooms were connected through copper pipes or cables to achieve sharing. This solution needs to take into account the length of the pipe, the location of the installation and reinstallation, the specification of the copper pipe, the safety of the cable, etc.

It should be noted that no matter which scheme is adopted, sufficient measurement and design need to be carried out before installation to ensure that the cooling and heating effects of the air conditioner meet the requirements, and the maintenance and maintenance of the air conditioner need to be taken into account to ensure the service life and effect of the air conditioner. If you are not sure how to install it, it is recommended to ask a professional air conditioner installation company to install it.

The easiest way to share two rooms with a hanging air conditioner is to use the air supply duct to break up the diversion. The specific steps are as follows:

1.Install the air supply outlet diverter: connect the air supply outlet of the hanging air conditioner to the air inlet of the air supply pipe diverter, and then connect the two air outlets of the shunt to the air inlet in the two rooms respectively.

2.Install the air inlet valve: Install a valve on the air inlet in each room so that the air conditioner can be turned on or off at any time.

3.Install the air supply duct and connector: According to the actual situation, select the appropriate air supply duct and connector, and then connect the air supply duct to the air outlet of the diverter and the room air inlet.

It should be noted that in order to ensure air circulation, the length of the air supply duct should be controlled within a certain range. At the same time, due to the different sizes of the two rooms, the use of the same air conditioner may need to be adjusted according to the actual size and usage of the room to ensure air circulation and comfortable temperature.

For household wall-mounted air conditioners or cabinet air conditioners, it is almost impossible to achieve the ideal state of "one air conditioner tube for two rooms". If you want to use it in this way, you can only open the door of the room and place a fan between the two rooms to assist in the air circulation between the two rooms. For the air duct air conditioning unit, it can be achieved by sending air to two rooms separately and returning air from the two rooms at the same time.

1. Install a ventilation fan. You can first install the air conditioner in a larger room, and then install two changing fans on the partition wall between the two rooms, one blowing in the forward direction and the other in the reverse direction, to speed up the air circulation in the two rooms. It is worth noting that the partition between the two rooms cannot be a load-bearing wall, otherwise this method should not be used.

2. Install air ducts. Purchase an air duct of appropriate length, one end facing the air outlet of the air conditioner, and the other end facing the two rooms, and introduce the air outlet of the air conditioner into the two rooms respectively. This method does not need to destroy the decoration and is more common, but the air duct takes up more space and will affect the interior aesthetics.

3. Open the partition. After determining that the partition between the two rooms is a non-load-bearing wall, you can directly knock on the wall and replace the hard partition with a shutter or other partition with strong ventilation, so as to ensure the interconnection and air exchange between the two rooms. However, this method will sacrifice the privacy of the two rooms, and the soundproofing effect will be significantly reduced.

4. The air conditioner is hung in the middle. Punch a small hole in the partition wall that can accommodate a hanging air conditioner, and then hang the air conditioner directly in the middle of the hole. In this way, when the air conditioner is turned on, both rooms can feel the direct air supply effect of the air conditioner.

But in this way, the aesthetics are too poor, and the drainage pipe should be lengthened, which will also affect the cooling and heating effect of the two rooms.

OK. It is necessary to fully consider the situation and wires used at home, the current carrying capacity of the air switch liquid, the wiring method, etc

The entrance wire is 10mm2, and there is a distribution box above the door at home, which has several air switches, how much a is the air switch, and how many square meters of the wire drawn out by the air switch are particular.

If one air switch is used exclusively for one air conditioner, and three air switches are used for three air conditioners, there is no problem at all;

If one air switch has a relatively large capacity and can be used by three air conditioners, there is no problem;

If one air switch is used for all the sockets in the house in addition to three air conditioners, it will not work;

If an air switch has a large combustion capacity, it can be used for three air conditioners, but the cross-sectional area of the wire is not large, and it is not possible.

Yes, but it doesn't work well.

It is difficult for the cold air and hot air generated by the air conditioner in the living room to form an effective convection with the air in two rooms without air conditioning, so even if the door is opened in the room without air conditioning, the air conditioning effect inside will not be good.

Placing a small fan at the door between the room and the living room without air conditioning to enhance the air convection between different areas can improve the situation to a certain extent, but the air conditioning effect in the room is still not very good.

The home circuit can turn on 2 air conditioners at the same time.

Because the maximum home socket is 10A, and the minimum air conditioner is 1P smaller, the combined current of the two minimum air conditioners is equal to about 8A, so the home circuit can turn on 2 air conditioners at the same time.

1. Principle of air conditioning and refrigeration: liquid vaporization refrigeration uses the heat absorption during liquid vaporization and the exothermic effect of condensation to achieve refrigeration. The liquid vaporizes to form steam.

When the liquid (refrigeration working fluid) is in a closed container, there is no other gas in the container except for the vapor produced by the liquid and the liquid itself, and the liquid and vapor will reach equilibrium at a certain pressure, and the gas at this time is called saturated steam, the pressure is called saturation pressure, and the temperature is called saturation temperature.

2. Heating principle of air conditioning: the compressor sucks in low-pressure gas and compresses it into high-temperature and high-pressure gas through the compressor, and the high-temperature gas increases the water temperature through the heat exchanger, and the high-temperature gas will condense into liquid. The liquid enters the evaporator for evaporation, (the evaporator evaporates at the same time, and there must be heat exchange, according to the heat exchange, the model structure of different machines is also different, and the commonly used ones are air-cooled and ground sources.

After passing through the evaporator, the liquid becomes a low-pressure cryogenic gas, which is again sucked in by the compressor for compression. If this is circulated, the circulating water on the side of the air conditioner will become hot water at about 45-55 degrees. Hot water is sent to the room that needs to be heated through the pipe, and the room is equipped with a fan coil unit to exchange hot water and air to achieve the purpose of heating.

One of the rooms is equipped with air conditioning, and two ventilation fans are installed on the partition wall between the two rooms, one blowing forward and one blowing backward, to achieve ventilation and ventilation of the two rooms; How does one air conditioner make two bedrooms work at the same time? 2. Install an air duct to the air outlet of the air conditioner, and introduce the air outlet into the two rooms respectively; 3. Install a large window similar to a shutter on the partition wall of the two rooms to connect the temperature field of the two rooms; 4. Remove or partially remove the partition walls between the rooms; Either way, as long as the air conditioning of the two rooms is shared, the privacy of the two rooms will be reduced at the same time, and whether the number of air conditioners matches the sum of the two rooms will directly affect the final effect of the air conditioner.