How to adjust the car rearview mirror, how to adjust the car rearview mirror?

The car rearview mirror is our third eye, through the car rearview mirror, we can observe the situation on the left, right and sides of the body, but the car rearview mirror can only play the greatest role if it is adjusted to the correct position, the specific method is as follows:

First of all, it should be clear that the prerequisite for adjusting the mirrors is that the seat position has been adjusted. The optimal seating position should be with your hands slightly bent on top of the steering wheel, your back and head resting naturally on the seat, and your knees slightly bent with your left foot on the clutch or your right foot on the brake. All in all, the rearview mirrors can only be adjusted after the seats have been adjusted.

Rearview mirror adjustment technique**.

The first is the left side mirror, and the driver should adjust the up and down angles to make the rearview mirror appear half of the sky and half of the ground by adjusting the up and down angles. Then the left and right angles are adjusted to about 1 4 in the range of the mirror occupied by the body. Note that when adjusting the rearview mirror of the car, it should be based on the driving sitting position, and it cannot be said that it can be adjusted by looking at the rearview mirror closely.

Then there is the right side mirror, because the right side of the car mirror is the farthest away from the driver's position, so we have to reduce the space occupied by the sky, try to leave the space of the rearview mirror to the side of the body, so the right side of the car rearview mirror sky only occupies 1 4, and the body also occupies 1 4.

Back to the rearview mirror in the car, its adjustment is relatively simple, many people adjust the rearview mirror of the misunderstanding is to use it to observe the rear passengers or think it is an eyesore, directly twisted to the angle of the sky, the correct adjustment is through the rearview mirror can see the situation behind the car through the rear window, the ground and the sky occupy half of the proportion, then you can.

The above is the conventional adjustment of the rearview mirror technique, this method has a disadvantage that there are visual blind spots on both sides of the vehicle, that is, when the rear vehicle intends to merge, the left and right rearview mirrors can not fully reflect the blind spots on both sides. So how to adjust the position of the rearview mirror in this case?

Quite simply, the new method is to continue to extend the left and right mirrors outwards until you can't see the side wings of your body in the mirror, and stop adjusting.

What is the difference between the two adjustment methods? We reflect this through a specific test, parking the car in the middle of the road, and then recording the situation reflected in the rearview mirror of the rear car at different distances according to the conventional adjustment method and the new method just mentioned

However, there is a new problem with the new method, that is, there is no way to observe one's own body, and there is no way to judge the distance between the body and obstacles, which undoubtedly increases the difficulty.

Therefore, what is the best position to adjust the rearview mirror to, that is, to be able to leave as much space as possible to reflect the road conditions, and retain a little body flank, so that the body can be seen when reversing, obviously, we need to find a balance in eliminating blind spots and the visibility of the body of the car.

The rearview mirror is a tool for the driver to directly access external information such as the rear, side, and bottom of the car while sitting in the cab seat. In order to facilitate the driver's operation, prevent the occurrence of driving safety accidents, and ensure personal safety, all countries have stipulated that rearview mirrors must be installed on the car, and all rearview mirrors must be able to adjust the direction.

When it comes to rearview mirrors, many riders like to adjust them in the way they are used to, but sometimes your "habits" may be wrong, why do you say that? So let's talk about it.

Before adjusting the rearview mirror, we should first maintain a comfortable and convenient driving position, that is, sit comfortably, have a clear vision, and hold the steering wheel smoothly, which is in place.

First, adjust the left side mirror.

As shown in the figure below, many friends say that it is parallel to the horizon, which makes sense, but generally speaking, it is not so easy to find the horizon. Therefore, in line with the principle of half heaven and half earth, you can clearly see the vehicles behind you. Regarding the body, it is recommended to follow the bodywork and curb 1:

4 to adjust the ratio, so that you can see both the direction of the trunk and the road surface.

Next, adjust the right side mirror.

There is still a certain difference between the right side of the rearview mirror and the left side, we have to follow the ratio of heaven and earth 4:1 to adjust, because you sit in the driver's seat, the effect you see and the effect you see on the left side, there must be a visual difference, therefore, the angle is too large will affect safety, left and right, the body accounts for a quarter of the good.

Many people think that in order to eliminate blind spots, they try to adjust the left and right rearview mirrors outward or downward. In addition, perhaps in order to maintain a neat appearance at any time, there are also many people who adjust the ** rearview mirror to the position where they are shining into it while driving, and in fact, to obtain the maximum effective rear viewing angle, it is the most correct to adjust it in accordance with the above figure.

A normal driver can see about 200 degrees left and right in front of him without looking back, in other words, about 160 degrees is invisible, so we must treat our good helper - the rearview mirror.

Specifically**rearview mirror, adjust the left and right positions to the left edge of the mirror just to cut to the right ear of your image in the mirror, which means that in general driving situations, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon in the mirror**.

Next is the left side mirror, which needs to be placed in the upper and lower positions to put the distant horizon in **, and the left and right positions are adjusted to 1 4 in the mirror range occupied by the body.

Because the driver's seat is located on the left side, so the driver's grasp of the right side of the car ear is not so easy, coupled with the need to sometimes stop on the side of the road, the ground area in the right rearview mirror when adjusting the upper and lower positions should be larger, accounting for about 2 3 of the mirror surface. The left and right positions are also adjusted to the body occupies 1 4 area.

When driving at high speeds, the driving school may have more blind spots than you expected, but it is not something that can be covered by just three rearview mirrors, so whether you are switching lanes or turning left and right, you should pay more attention to the rearview mirror!

Carefully grasp the above points, your driving is not harmful, and finally a wordy sentence, you must regularly check the road conditions through the rearview mirror during the road test, otherwise, the examiner will judge that there is a lack of awareness of safe driving school.

Xiao Kun said that the car, so that you don't have to worry about driving a car!

Hello, if the general car rearview mirror is adjusted, it should be adjusted according to the height of the individual, sit in the driver's seat, and adjust the rearview mirror to the handle that can see the rear door of the car.

Hello, the rearview mirror of the car should be adjusted to its own suitable position, and you can see the rear door handle of the car.

Xiao Kun said that the car, so that you don't have to worry about driving a car!

On the basis of seeing the body, it is good to be able to see the distance as much as possible!

That's the best!

1.Left rearview mirror :

When adjusting the left rearview mirror, the up-and-down adjustment specification is to put the distant horizon in the middle. When adjusting the rearview mirror up and down, it should be adjusted to a quarter of the rearview mirror area occupied by the body, so that it can have a better vision when used and improve the driving safety factor. When adjusting the left mirror, it is easier to place the horizontal line on the center line of the mirror and then make adjustments.

2.Right rearview mirror:

When adjusting the right rearview mirror, it was a little more troublesome than the previous year. It's not easy to get a good grasp of the itinerary on the right side in China. When adjusting the upper and lower positions of the right rearview mirror, the ground area needs to be quite large, accounting for about 2 3 of the mirror surface, and the upper and lower positions are 1 4 of the rearview mirror area occupied by the car body.

When adjusting the right rearview mirror, pay attention to placing the horizontal line at 2 3 of the rearview mirror position, and then adjust it. It's getting easier and easier to adjust in this way.

3.Interior mirrors:

When adjusting the rearview mirror in the car, the up and down position is adjusted to the driver's right ear, so that the adjustment method can better observe the rear travel situation in the driving process, and the upper and lower positions of the rearview mirror in the car should be placed on the distant horizon on the mirror surface**. When adjusting the rearview mirror in the car, remember to adjust the specification: horizontal swing in the middle, ear on the left.

The left and right rearview mirror adjustments are as follows: left rearview mirror adjustment, right rearview mirror adjustment.

1. Adjust the left rearview mirror

To adjust the left side mirror, the driver should use the horizon as the benchmark and adjust the up and down angles so that the rearview mirror shows half of the sky and half of the ground. Then the left and right angles are adjusted to about 1 4 in the range of the mirror occupied by the body. Note that when adjusting the rearview mirror, the driver's sitting position should be based on the driving, and it cannot be said that you are close to the rearview mirror to observe the adjustment.

2. Adjust the right rearview mirror

It is the right side mirror, and since the right side mirror is far away from the driver, it is necessary to reduce the space occupied by the sky. Therefore, compared with the left rearview mirror, the right rearview mirror should have a difference in the proportion of sky and ground, the sky occupies 1 4, the horizon line is adjusted to 2 3 in the right rearview mirror, and the left and right angles are similar to the left rearview mirror.

The purpose of the rearview mirror adjustment

Mirror adjustment is designed to reduce the driver's blind spots, and it also plays a vital role in everyday driving. Generally, car owners will fix a position when driving their own cars, so it is easier to see the picture in the left rearview mirror, so it is very important to adjust the left rearview mirror.

The rearview mirror is based on each person's different situation to ensure that you can clearly see the rear vehicle, and the side rearview mirror should also see your own rear tire.

**The rearview mirror can help the owner quickly judge the road conditions behind and keep a safe distance from the car behind. Adjust the mirrors so that they are parallel to the horizon and place the horizon in the mirror, with the mirror slightly facing the driver, to ensure that you can see the vehicle directly behind you.

Since the left rearview mirror is close to the driver's side, the driver's blind spot is smaller, and the blind talk gets a wider field of vision, and the angle of adjustment is not as large relative to the right rearview mirror. Similarly, adjust the horizon line to 1 2 in the center of the left rearview mirror so that the exposed 1 4 body is in the mirror. There are too few exposed images of the body to see the vehicle close to the rear of the car; If too many body images are exposed, it is easy to see vehicles that are already parallel.

Because on the right side, the driver's blind spot will be larger, and the adjustment angle is not the same as in the left side mirror. At this time, the horizon should be adjusted to 2 3 in the right rearview mirror, and the body image should also be ** to 1 4.

The role of car rearview mirrors

1. In order to facilitate the driver's operation, prevent the occurrence of driving safety accidents, and ensure personal safety, rearview mirrors must be installed on the car, and all rearview mirrors must be able to adjust the direction. The driver sits in the cab seat and has direct access to external information such as the rear, side and bottom of the car.

2. The rearview mirror has a vision problem, that is, it refers to the range that the mirror can reflect. In the industry, there are three elements of vision, that is, the distance between the driver's eyes and the rearview mirror, the size of the rearview mirror and the radius of curvature of the rearview mirror.

3. When the distance and size of the rearview mirror are the same, the smaller the curvature friction radius of the mirror, the larger the field of view reflected by the mirror. Hail heightWhen the radius of curvature of the mirror is the same, the larger the size of the mirror, the larger the horizon reflected by the mirror.