Teach you how to adjust car mirrors, how to adjust car mirrors

The car is equipped with three rearview mirrors, namely the left side mirror, the right side side mirror, and the ** rearview mirror. The driver's seat must first be adjusted to the most comfortable driving position, and then the mirrors can be adjusted. Adjustment of the left side mirror:

The upper and lower positions are to place the distant horizon in **, and the left and right positions are adjusted to the body occupying the mirror range of 1 4;The adjustment of the right side rearview mirror: because the driver's seat is on the left side, so the driver is difficult to grasp the situation on the right side of the body, therefore, when the right side rearview mirror adjusts the upper and lower positions, the ground area should be larger, accounting for about 2 3 of the mirror area, and the left and right positions are also adjusted to the 1 4 of the body occupying the mirror range. Many people believe that to eliminate the blind spot of the line of sight, the left and right rearview mirrors should be adjusted out or lowered as much as possible, in fact, this is a misunderstanding, under normal circumstances, the driver only turns his eyes and does not look back, he can see the range of about 200 degrees ahead, and the other range of about 160 degrees is not visible, in fact, after using the left and right rearview mirror and ** rearview mirror, it can only provide an additional 60 degrees or so of the visual range, and the remaining 100 degrees can only be solved by the driver looking back.

Although many new cars are now equipped with double-curvature mirrors, this only expands the viewing angle of the left and right mirrors, and still does not fully cover all areas. Since most of the original rearview mirrors of the car are smaller, it is recommended that you have the conditions to buy wide-angle rearview mirrors in the car supply store, although the curved design of the interior rearview mirror reflects a larger range, but there are distortion of the distortion of the distortion, so it is advisable to buy a flat mirror to avoid dizziness. In addition, in view of the situation that there is a lot of rain in Shanghai, it is recommended that car owners can install electric heating devices in the left and right rearview mirrors, so that they do not have to be troubled by the rain blurring the rearview mirror when driving in rainy days.

**Adjustment of the rearview mirror: the left and right positions are adjusted to the left edge of the mirror, cut to the right ear of the image in the mirror, under normal circumstances, you can't see yourself from the rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror**. The essentials of the adjustment are:

Swing horizontally in the middle and put the left side between the ears, that is, the distant horizontal line is placed horizontally in the midline position of the **rearview mirror, and then move left and right, and place the image of your right ear on the left edge of the mirror;

1. Adjust the ** inner rearview mirror.

Adjust the horizon image in the rearview mirror to the mirror, and adjust the image of the right ear to the left edge of the mirror.

2. Adjust the left rearview mirror.

The left rearview mirror is based on the horizon, and the horizontal line of the rearview mirror is adjusted first, with the sky and the earth each occupying 1 2, that is, the position of the middle line; Then adjust the left and right sight of the rearview mirror, and adjust the body to occupy about 1 4 of the mirror. It is also possible to reduce the area occupied by the sky and the car body slightly to improve the visibility of the road.

3. Adjustment of the right rearview mirror.

In the adjustment of the right rearview mirror, it is necessary to reduce the area occupied by the sky due to the driver's viewing angle. Adjust the horizon image in the right side mirror to the mirror height 2 3, and adjust the image of the right side of the car to occupy the left side of the mirror 1 4 area. However, when parking in the side position, we need to make a temporary angle adjustment according to the actual needs.

Get in the driver's seat of the car, adjust your body position, and find a position that you feel most comfortable and easy to drive, and this sitting position must be able to easily step on the accelerator and brake.

The first adjustment is the left rearview mirror, the upper and lower positions of the left rearview mirror are adjusted to see half of the sky and the earth from the rearview mirror, and the left and right positions are adjusted to the body accounts for about a quarter of the left rearview mirror.

The left and right positions of the right rearview mirror are also occupied by the body in a quarter, the difference is that the right rearview mirror occupies two-thirds, and the sky only occupies one-third.

Because the driving position is on the left side of the car, the line of sight is somewhat biased, and only the rearview mirror adjusted to this state can see the car on the right.

1. Adjust the inner rearview mirror, we have to adjust the horizon image in the rearview mirror to the mirror, and adjust the image of your right ear to the left edge of the mirror.

2. Adjust the left exterior mirror, we need to adjust the horizon and opening line image in the rearview mirror to the mirror**, and adjust the image of the left body to occupy the area of 1 4 on the right side of the mirror.

3. Adjust the right side exterior mirror, we need to adjust the horizon image in the rearview mirror to 2 3 places located at the height of the mirror, and adjust the image of the right side of the body to occupy the area of 1 4 on the left side of the mirror. Allowing the image on the ground to occupy more of the area of the right side mirror of the Shencano circle makes it easier for the driver to grasp the road conditions on the right side of the wide collapse of the vehicle, and it is easier to grasp the distance between the vehicle body and the road when pulling over.

There is a relatively unified set of data for the adjustment of car rearview mirrors, but individuals have different views on this set of data, and I will introduce it according to my personal feelings. The rearview mirror is divided into inner rearview mirror and outer rearview mirror, which are adjusted differently:

1. Adjust the exterior mirror.

The left side rearview mirror is horizontally adjusted, and the body should occupy 1 4 of the lens, and the rest is used to observe the road conditions; Vertical adjustment, the lens should be adjusted in a 50:50 ratio to the middle line of the body as a reference, so that the lower part of the lens can reduce the blind spot of observation, and the upper part will not see the large car coming from the side.

2. Inner rearview mirror.

The adjustment of the inner rearview mirror is relatively simple, to put it bluntly, after adjusting the habitual driving posture, the visual range of the inner rearview mirror can be adjusted to completely cover the rear gear range, and the distance between the upper and lower edges of the rear gear and the upper and lower edges of the rearview mirror can be consistent.

1.Adjust the position of your seat and steering wheel to ensure that your vision can be well observed in the rearview mirror.

2.First, adjust the mirrors in the car, adjust the horizon image inside to the mirror**, and adjust the vehicle you see on the right to the left.

3.Adjust the mirror on the left side of the car, adjust the things in the audition to the ** position, and adjust the image of the left body to occupy the area of 1 4 on the right side of the mirror.

4.Adjust the mirror on the right side of the car so that the image is two-thirds of the way up to the audition, and adjust the rightmost part of the mirror to a quarter of the way.

The rearview mirror is a tool for the driver to directly access external information such as the rear, side, and bottom of the car while sitting in the cab seat. In order to facilitate the driver's operation, prevent the occurrence of driving safety accidents, and ensure personal safety, all countries have stipulated that rearview mirrors must be installed on the car, and all rearview mirrors must be able to adjust the direction.

The adjustment method of the rearview mirror is incorrect, which can easily lead to the appearance of blind spots and cause accidents. Next, I will teach you how to adjust the rearview mirror correctly, but you should remember it well. In life, it is common to encounter the results of two types of adjusting the rearview mirror.

First, the overlap angle of the inner and outer rearview mirrors is too large, resulting in a narrow field of vision. The second is that the blind spot angle of the internal and external rearview mirrors is too large, resulting in a blind angle of vision.

In both cases, there will be hidden dangers in the process of driving.

Left mirror adjustment.

The left exterior mirror adjustment should be half of the top and bottom, that is, the ratio of 1:1 between heaven and earth, left 3 4 right 1 4 (1 4 area close to the body), you can see the door handle of the rear door.

Right mirror adjustment.

Because the right side is farther away from the driver, the right side of the exterior mirror adjustment is slightly different from the left side, the right side of the mirror adjustment should be up 1 4 down 3 4, left 1 4 right 3 4 (1 4 area close to the body), you can see the door handle of the rear door.

**Rearview mirror adjustment.

**Three points should be paid attention to when adjusting the rearview mirror: first, the right ear is visible on the left edge of the mirror; Second, the entire rear windshield is in the inner mirror; Third, the ratio between heaven and earth in the distance is 1:1.

Proper adjustment of the rearview mirror is really important for safe driving. Friends must remember!

Many traffic accidents caused by overtaking in parallel lanes are caused by the driver's lack of careful observation or driving "blind spots"! The driver can adjust the rearview mirror to minimize the blind spot.

Step 1: Adjust the rearview mirror.

The standard for adjusting the **rearview mirror is mainly based on the horizon, so that the horizon can be placed in the mirror**.

Step 2: Adjust the left mirror. Because the left rearview mirror is relatively close to the driver, for the left rearview mirror, the left dead angle of the body is relatively small, and the line of sight is generally good.

Adjust the horizon image in the left rearview mirror to the center of the mirror, and make sure to adjust the left body image to the area that occupies 1 4 to the right side of the mirror, that is, half of the world and a quarter of the body.

Step 3: Adjust the right mirror.

Due to the fact that the right side of the car is far away from the driver, the blind spot is larger. Therefore, for the right rearview mirror, the upper and lower positions mainly place the horizon line in the 2 3 position of the rearview mirror. The left and right positions can also be adjusted until the body occupies 1 4 mirror area.

Step 4: Try to eliminate blind spots.

There are many misunderstandings when adjusting the rearview mirror, such as trying to adjust or lower the rearview mirror, and even some beauty lovers adjust the rearview mirror in order to shine into it. These will only increase the blind spots!

Adjust**.

The left and right positions of the rearview mirror are adjusted to the mirror surface.

Left edge. It is just cut to the right ear of the image in the mirror, which means that in the general driving situation, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror**.

**Rearview mirror adjustment essentials: horizontal swing in the middle, inter-ear amplifier.

Left. The distant horizontal line is placed horizontally in the midline of the ** rearview mirror, and then move left and right to put yourself in the right ear.

The image is placed on the left edge of the mirror.

Adjust the left side mirror.

When working on the upper and lower positions, set the distant horizon line to **, and adjust the left and right positions to.

The body occupies 1 4 of the mirror range.

Adjustment essentials for the left side mirror: Place the horizontal line in the center line of the mirror, and then adjust the edge of the body to occupy the mirror image 1 4.

Adjust the right side. Rearview mirror because the driver's seat is located on the left side, so the driver's grasp of the right side of the car is not so easy, coupled with the need to sometimes stop on the side of the road, the right side of the rearview mirror in the adjustment of the upper and lower position of the ground area should be left larger, accounting for about 2 3 of the mirror. As for the left and right positions, it is also adjusted to the body occupies 1 4 mirror area.

Adjustment essentials for the right side mirror: Place the horizontal line in the 2 3 position of the mirror, and then adjust the edge of the body to 1 4 to occupy the mirror image.

How to eliminate as much as possible.

There are a lot of blind spots.

I think that in order to eliminate the blind angle of sight, try to adjust the left and right rearview mirrors outward or downward. In addition, some studies have shown that perhaps in order to maintain a neat appearance at any time, or because of the love of beauty, there are also many drivers who adjust the ** rearview mirror to shine themselves in, and these are all wrong practices. According to relevant professionals, in order to obtain the maximum effective rear viewing angle, it is the most correct to adjust according to Figure 4.

A normal driver can see something if he only rolls his eyes without looking back.

The 200-degree left and right range ahead, in other words, about 160 degrees is invisible. It depends on three small pieces.

The mirror can cover the remaining 160 degrees, which is too "difficult to use a strong mirror"; In fact, the left and right rearview mirrors plus ** rearview mirrors can only provide an additional vision range of about 60 degrees, so what should we do with the remaining 100 degrees?

It's simple, look back more!

end precautions.

A reminder to car owners, although now there are a lot of new cars that are equipped.

Double curvature mirrors.

But that's just a left and right rearview mirror.

Range of viewing angles. A slight expansion does not cover all areas. In addition, it is not difficult to buy in the car department stores on the market.

The wide-angle lens may be able to further eliminate some dead angles, but the wider the viewing angle of the rearview mirror image.

Degree of deformation. The bigger it is, at the same time.

The more difficult it is to grasp the distance between the object in the mirror, which is the "***" that must be faced at the same time when using a wide-angle lens.

The car is equipped with three rearview mirrors, one for the left and one for the right exterior and one for the interior, and the three mirrors are positioned differently, so the method used for adjustment is also different. Theoretically, the order of adjustment should be the interior mirror, the left exterior mirror, and the right exterior mirror.

1. The rearview mirror in the car is used by the driver to observe the road behind the vehicle and the situation of the incoming car, and the adjustment of the rearview mirror in the car should ensure that the driver maintains a normal driving posture and can see the full area of the rear windshield through the rearview mirror to ensure the maximum rear vision.

2. Since the driver is close to the left side of the exterior mirror, the adjustment of the left side side of the exterior mirror should also follow the principle of ensuring the maximum viewing vision. When adjusting the angle of the vertical direction, the angle between the mirror and the ground should not be too large, not too small, according to the driver's normal driving posture to adjust to the appropriate angle, theoretically should be shown in the mirror of the road surface area of 1 3 of the total area of the mirror. When adjusting the angle of the left and right directions, the driver should be able to see the two lanes on the left side of the lane and the door handle of the left rear door, so that the road behind the left side of the vehicle and the oncoming traffic situation can be included in the field of view of the left exterior mirror as much as possible.

The adjustment of the right side of the exterior mirror, can also refer to the method of adjusting the left side of the exterior mirror, but the direction is opposite, and, because the driver is far away from the right side of the exterior mirror, it is easy to appear driving blind spot, so special attention should be paid to the mirror angle of the vertical direction and the left and right direction when adjusting, to ensure the maximization of the field of vision in the mirror.