-
In the event of an automatic restart of Apple, it is recommended to deal with it in the following ways:
1. In this case, most of the time there is a problem with the system of the mobile phone, and it is impossible to boot it, so the only way is to enter DFU mode to flash the machine, first of all, install an iTunes on the computer;
2. After installing iTunes on the computer, then you have to re** an Apple system, that is, iOS firmware, this firmware version is as much different as possible from the current mobile phone version, and the firmware can be found as long as it is a glance;
3. After preparing the iTunes and flashing firmware, you can start to officially flash the computer, first open the iTunes installed on the computer, and then connect the iPhone with the computer with a data cable;
4. After connecting the mobile phone with the computer, and then press the power button and the volume reduction button at the same time, at this time Apple's logo will appear, don't care, continue to press the double button and don't let go, the Apple logo will disappear again, at this time, release the power button, continue to keep the volume reduction key and don't let go, and keep pressing until the computer sends out the prompt sound "Ding Dong" connected to the mobile phone, which means that it has entered the DFU;
5. When the mobile phone enters the DFU, iTunes on the computer will pop up a prompt to connect to an iPhone, click "Confirm";
6. When you click "OK", iTunes will appear as shown in the following figure, this time the more critical step is coming, the shift key on the keyboard, and then click the "Restore iPhone" button;
7. After clicking the "Restore iPhone" button, the system will open the folder, and then select the firmware that has been done before, at this time, the system will remind you, click "OK";
8. After completing the above steps, start to reinstall the system, and then on the way to restore the iPhone, do not turn off the computer or unplug the data cable, let alone turn off iTunes;
9. When the mobile phone system is installed, and the screen of the mobile phone appears in the following situation, it means that the mobile phone system has been reinstalled successfully, and then open it for use.
-
Generally, there are several reasons for the automatic shutdown of mobile phones, which can be self-checked.
1) Check whether there is a virus on your phone.
If the phone suddenly and frequently restarts, it is likely that it is a virus. You can use the mobile phone security guard to scan and disinfect the mobile phone first, and clean it up.
2) Uninstall some unnecessary software.
If there are too many mobile phone installers and too many software running at the same time, it is easy to fail to run and restart.
3) Software conflict issues.
If you think about whether you have installed or upgraded any software recently, it is often these software conflicts that cause the system to restart automatically, so you only need to uninstall the software that caused the conflict.
4) Factory reset.
If you can't be sure what software or plug-ins are causing your phone to restart frequently, you can choose to factory reset your phone and save the more important things on your phone before doing so.
5) There is a problem with the SIM card.
In addition to the internal software problems of the phone, the hardware problems of the mobile phone can also cause the phone to restart, and the SIM card error is a common hardware problem. Change a SIM card to the phone and see if there is a reboot to determine whether it is a SIM card problem.
6) Phone battery contact issues.
Poor contact of the mobile phone battery will also cause the mobile phone to automatically restart, and you can take it to the mobile phone repair office for consultation and help.
-
Apple mobile phone will automatically turn on when the phone is turned off and charged, and the reason and solution:
1. Under normal circumstances, the iPhone will be turned on automatically when the battery is exhausted and charged, and the normal iPhone will not be automatically turned on when the battery is turned off and charged. After the user shuts down the power and presses the power button to cause the charging to reach the power level, it will cause the iPhone to turn on automatically. It is normal and does not require maintenance.
2. The mobile phone can be turned off and charged. Like the Hong Kong version or the American version, Apple will automatically turn on after turning off and charging. Because the default setting of the mobile phone charging of the non-national bank iPhone is when the mobile phone is turned off, the mobile phone will automatically turn on when the battery reaches 4%, and there is no need to be like some other mobile phone systems.
-
The Apple 7P always turns off and on automatically after charging, and there are many reasons for this:
Software and system conflicts. You can check the recently installed software and uninstall it to see if it is back to normal. Often, these software conflicts cause the system to restart automatically, so you can simply uninstall the software that caused the conflict.
Factory reset. If you can't be sure what software or plug-ins are causing your phone to restart frequently, you can choose to factory reset your phone and save the more important things on your phone before doing so.
If a factory reset doesn't solve the problem, it may be a problem with the phone's own hardware, most commonly the phone's battery contact problem. Poor contact of the mobile phone battery will also cause the mobile phone to restart automatically, it is best to go to a professional repair point to detect the problem of the mobile phone and seek a solution.
The iPhone 7 Plus is an upgraded version of the Apple 7 mobile phone, which was released at the 2016 Apple Autumn New Product Launch Conference on September 8, 2016, Beijing time. The screen size is inches, with dual 12-million-pixel cameras, natural bokeh effect, 25% brighter brightness, and better colors. The speakers are upgraded, with upper and lower stereo speakers.
Apple 7 plus-encyclopedia.
-
What does Apple Shutdown Charge show? What's going on with the phone charging and automatically turning on.
-
The iphone12 I use**, it will automatically turn on when it is turned off and charged, which is normal.
-
My 12 apples turn on automatically.
-
The charging would have turned on automatically...
-
Because the equipment is different, the cause of the failure is also different, it is recommended to eliminate them one by one according to the following methods, if not, it is a hardware problem, not to be able to solve it by yourself, it is recommended to send it to the maintenance point for testing.
Poor contact: If the interface of the mobile phone and the charging cable are not properly connected, the mobile phone may not be charged, check it; First see if there is any foreign object blocking in the bottom interface of the mobile phone, if not, look down;
Computer charging: If the above methods do not work, you can connect the mobile phone with a data cable to see if it can be charged, if it is sure that there is a problem with the mobile phone charger;
Replace the power cable or data cable: If the above methods do not work, you can use the replacement method to change a data cable to try, this can be a problem with the data cable;
Turn off and turn on again: If you still can't solve other problems, turn off your phone and take a look, it may be a common problem with smartphones.
The reason for the temperature: The battery is particularly sensitive to temperature, if the user's mobile phone feels particularly hot, put it aside to cool down to see if it can be charged.
Hardware failure: If the battery is broken or the charger is broken, it can only be replaced or sent for repair.
-
Turning off and charging will turn on! If it is charged and turned off, it will not turn on.
-
In this case, it is very likely that your mobile phone battery has aged more severely. Even if the phone shows a lot of power, there may be no way to support the phone running.
-
Summary. Hello, this should be when your battery is low, turn off and charge, and then leave the phone to turn on automatically when the battery exceeds the default set value, this is normal.
Hello, this muzhou should be shut down and charged when you know the low battery, and then the mobile phone will automatically turn on when the power exceeds the default set Xun jujube value, which is normal.
That's not the question I want to ask.
My problem is that the Apple 13 won't charge after it shuts down.
No power is turned on when the power is off.
It's okay, please speak.
That's it. Hello, it is powered off and cannot be charged or does not show charging**.
The power off does not charge and does not show charging.
Then did you turn on the battery after turning on your phone?
No. Now Apple is missing the OLED screen, in order to prolong the life of the screen to consider. The OLED screen displays the same content for a long time (such as the battery icon during charging), which is prone to the problem of "screen burning".
So sometimes the charging is not a round mold that does not display the power. If you don't have a long battery, then there's something wrong with your system.
You can change the charger and data cable and try again, if it still doesn't work, consider the problem of the system, the general code beam mobile phone does not regret the mold car may have problems, and then 13 is a new mobile phone, there may be a bug in the system
When the battery is exhausted, it will automatically turn on. >>>More
Apple 11 Edition: 1Settings, ID, iCloud, ** with purchases, 3Subscription, 4Cancel recurring orders. (I just looked, I didn't make it, try it).
Solution: For users who have set iCloud lock on iPhone7, note that you must remember to set the Apple ID account and password, otherwise it will be troublesome to be locked by Apple ID after unlocking the password. >>>More
Friends who have used Apple mobile phones know that Apple mobile phones have a [Access Restrictions] function, through which you can turn off some system functions of the mobile phone, such as App Store, Siri and Safari. But sometimes we will not use [Restrictions] for too long, resulting in us forgetting the password, the following brings you the solution to iPhone 7 forgot the access restriction password. >>>More
Charger issues.
First, you should take a look at the power adapter you're using. As we all know, although the voltage of the mobile phone charging head is 5V, there is a big difference in the current size. At present, the standard charging current of most mobile phones on the market is more than 1A, and the standard charging current of tablets is more than 2A >>>More