How to disassemble the panel to clean the filter screen of the Hisense cabinet air conditioner

1. First of all, in order to prevent electric shock and leakage, you need to turn off the power socket, or you can directly unplug the socket, which is very important;

2. Then open the shell of the air conditioner upward, with a very light force, special attention should be paid to the fact that if you find that it is not easy to open by hand, you can use a screwdriver to help, do not use brute force, to master the skills, otherwise it is easy to damage the shell of the air conditioner;

3. After opening the shell and then lifting it above the air conditioner, the air conditioner shell can be automatically stuck and fixed, so you don't have to worry about falling off; At this time, you can see that there is a plastic air conditioning filter inside, which is the part that loves to hide dirt and dirt;

4.You only need to gently push the filter up with your hand, and then remove the filter screen;

5 Put the strainer in the basin and rinse it directly with water.

6. Then add an appropriate amount of warm boiled water to the basin and soak for an hour, as shown in the figure below;

7 After an hour, clean the filter with clean water;

8 Finally, put the cleaned filter on the balcony to dry.

It's just that you can just lift the panel, and the plastic of the air conditioner is resistant to deformation and won't break. Pull hard, and it's open, and then pull out the filter inside. It's simple.

I'm really not at ease,You can contact Hisense's after-sales service,They will have professional staff to guide the operation,

Hisense air conditionerHow to remove the filter:

Tools Raw materials: Hisense air conditioner, brush.

Method Steps:

1. Before disassembling the air conditioner filter, carefully open the air conditioner shell, generally there are two small card slots stuck, and the outer cover can be cut out lightly.

2. After opening the outer cover of the air conditioner, there are often two buckles inside, and it is necessary to gently open it to make the outer cover fully open. Lead rock wide.

3. The filter screen is relatively easy to take, but it is stuck by a few card slots, first push the filter screen up, and then gently take out the filter screen after the lower end is out of the card slot.

4. After removing the filter, we gently rinse the filter with water several times, and we can scrub it several times with a soft brush.

5. Wait until the filter screen is dry, and install it according to the previous steps.

Hisense cylindrical air conditioner belongs to cabinet air conditioner, so the way to remove and wash the filter screen is different from that of hanging air conditioner. Here's how it works.

Turn off the power socket of the air conditioner room, lift both ends of the air conditioner's shell to open the shell, and then lift the shell above the air conditioner (the shell can be automatically stuck and fixed, so you don't have to worry about falling off).

There are 2 plastic frames (one on the left and one on the left) inside, and you can remove the filter by gently pushing it up by hand, rinse the filter directly with water, and then dry it and install it back into the indoor unit as it is.

Turn on the power and turn off the air conditioner. Select the BAI cleaning function Gently sweep the palm of the hand over the black induction of the panel, click the function key, select cleaning, and then press the " " or " " button to confirm, the cleaning pattern is bright. At this point, the shell starts to rotate automatically, and after about 27 seconds.

The housing stops rotating, and at this point the filter has been turned to the front of the air conditioner, and then the power supply to the air conditioner is cut off. Remove the air inlet panel.

Use a screwdriver to unscrew the screws that hold the air inlet panel in place, and break the two buckles of the air inlet panel. Remove the air inlet panel. Remove the filter and pull out the filter in the direction of the arrow. Wash the filter.

Turn on the power, tap the function, then click Clean, and then click the up or down arrow icon, so that the air conditioner will automatically rotate to the filter screen to be exposed, and then use a screwdriver to unscrew the fixing screw on the filter screen cover, remove the screen cover, and finally pull out the filter screen for cleaning.

<>How to remove the Hisense cabinet air conditioning filter:1、Open the air conditioning shell,There are usually two small card slots stuck,Gently pull the outer cover of the silver outward。 2. After opening the outer cover, pick open the two buckles inside, and completely open the outer cover.

3. Take off the filter, change or talk about the general filter screen is stuck by the card slot, just push the filter screen up gently, and then pull it off with your hand.

Summary. Haier cylindrical air conditioning filter disassembly and assembly**21, when disassembling and installing, it is necessary to cut off the power, this is to ensure personal safety, and then in the state of air conditioning shutdown, press the function button, and the cleaning pattern of the shower head icon flashes. 2. Press the up or down button to confirm after the shower head flashes, the cleaning icon will light up, and then the shell of the air conditioner will start to rotate automatically, and stop after about half a minute.

3. At this time, the filter screen will be transferred from the back to the front, and then we will unplug the power cord of the air conditioner, use a screwdriver to remove the screws on the panel one by one, and then break the upper and lower buckles, remove the air inlet panel, and pull out the filter screen to the right.

Hello dear! According to your description, I give the following conclusions and methods: different brands of cylindrical air conditioners, or different models of air conditioner filters have different removal methods, as follows: Haier cylindrical air conditioner cleaning Yan Wang Ruchang filter method 1:

Haier cylindrical empty bush laughing filter disassembly **11, put both hands on both sides of the blind combustion air conditioner in the recessed place. 2. Press down the buckle with both hands at the same time. 3. Open the air inlet grille upwards, and you will see the filter inside.

4. Gently press down on the protrusion in the center of the filter to get it out of gear, and then pull down the filter screen.

Cylindrical air conditioner disassembly method two:

Haier cylindrical air conditioning filter disassembly and assembly of the shirt Xiang **21, when disassembling and installing, it is necessary to cut off the power, this is to ensure personal safety, and then in the state of air conditioning shutdown, press the function button, and the cleaning pattern of the shower head icon flashes. 2. Press the up or down button to confirm after the shower head flashes, the cleaning icon will light up, and then the shell of the air conditioner will start to rotate automatically, and stop after about half a minute. 3. At this time, the collapsed rubber filter will be transferred from the back to the front, and then we will unplug the power cord of the air conditioner, use a screwdriver to remove the screws on the panel one by one, and then break the upper and lower buckles, remove the air intake panel, and pull out the filter screen to the right.

Precautions for cleaning and removing the filter screen: 1. The removed filter screen can be cleaned with clean water as soon as it is burned, and the water pipe is rinsed with tap water, and no other detergent is needed. 2. The clean filter screen can be carried and dried in a cool place, and it is best not to be exposed to the sun, the filter screen is generally plastic, and it is easy to be damaged by exposure.

3. The clean filter screen can be installed directly and then installed, the installation steps are the same as the removal steps, and the dust inside the air conditioner can be scrubbed clean before installation.

1.First, turn off the power of the air conditioner, remove the air conditioner panel, and take out the filter.

2.Put the filter in clean water and gently scrub it with a soft-bristled brush, being careful not to use too much force to avoid damaging the filter.

3.After washing, rinse the liquid skin with clean water, and then dry.

4.Spray the filter with a special filter cleaner and let it soak for 10-15 minutes.

5.Rinse again with clean water and let dry.

6.Put the filter back in place and reinstall the air conditioner panel.

7.Turn on the power of the air conditioner and test whether the air conditioner is working properly.

1.First, turn off the power to the air conditioner and unplug it, and Lu Wu attacked to ensure safety.

2.Open the empty brood panel and find the filter position. Tangerine pits.

3.Follow the direction of the arrow and gently push open the strainer cover.

4.Remove the filter and use a soft-bristled brush or vacuum cleaner to clean the dust and dirt on the surface of the filter.

5.If the filter is very dirty or smelly, it can be gently washed with warm water and mild detergent, then rinsed with clean water.

6.Wait for the filter to dry completely, then reinstall the filter.

7.Push the filter cover back into place in the direction of the arrow, making sure the cover is completely closed.

8.Finally, plug in the power plug, turn on the power of the air conditioner, and check if the air conditioner is operating normally.

Notes:1When disassembling and washing the filter, be sure to pay attention to safety to avoid electric shock or other accidents.

2.When cleaning the filter, do not scrape the filter with a sharp tool or brush to avoid damaging the filter.

3.When cleaning the filter, do not use overheated water or strong acidic and alkaline detergents, so as not to affect the service life of the filter.

4.Cleaning the filter regularly can ensure the normal operation of the air conditioner and the air quality, and it is recommended to clean it once a month.