How to clean the filter screen of the cabinet air conditioner, how to clean the filter screen of the

1.When cleaning the cabinet air conditioner, be sure to unplug the power socket of the air conditioner first, so as to ensure the safety of cleaning the air conditioner and effectively avoid the occurrence of contact.

2.Before cleaning the air conditioner, we can clean some dust on the surface of the air conditioner. At this time, you can wipe the surface of the air conditioner with a wet towel. At the same time, pay attention to cleaning the dead corners of the air conditioner when cleaning.

3.Once the surface of the air conditioner is cleaned, the air conditioner panel can be turned on. When taking out the air conditioner filter of the cabinet, there is usually a clip between the filter and the filter bracket.

If there is a baffle, turn the left and right intake baffles forward, then push the filter out of the buckle, and then slowly pull the filter out in the arc direction. The filter of the lower air inlet needs to be gently removed from the bottom of the air conditioner.

Step two. Turn off the power and open the host panel. The action should be slow and light, because many plastic products are easy to damage.

Some air conditioner hang-up panels have a button at the top, so be careful not to break. The air conditioner cabinet is divided into an inner panel and an outer panel, and pay attention to the wires connected when removing the cabinet panel.

Step 3. Remove the strainer. The air conditioner hangs up and gently pulls out the filter directly. Some cabinet filters are on the outer panel, which can be removed, and some models are fixed with screws, which need to be paid attention to.

Step 4. If the fins are dirty, you can use a special cleaning agent to rinse the large particles, and do not use a hard brush, otherwise the fins will be damaged. If large particles are not obvious, ignore this step.

Step five. Spray the perfect air conditioner foam cleaner on the fins, shake well before spraying to form a pressure, spray at an oblique angle of 20 degrees, and spray several times according to the degree of dirtiness of the air conditioner. The dirtier the air conditioner, the darker the foam will become, generally brown, and the dirtier it will turn black.

Wait about fifteen minutes after spraying.

Step 6. Wait for the gap to clean the filter screen and wipe the panel with a special cleaning agent.

Step 7. After the foam is decomposed, you can rinse the fins with a watering can depending on the degree of pollution, if it is not dirty, you can ignore this step. If it is a cabinet unit, it can be equipped with a flush sink.

Step 8. Reset the strainer, be sure to install it in place, and prevent it from lifting. Reset the panel. If it is a cabinet, the bottom of the cabinet can be scrubbed clean before the panel is reset.

Step 9. Turn on the power and restart the machine for 30 minutes to ensure that the dirty water is completely drained from the drain. To avoid spraying the detergent, start by covering the exhaust vent with a towel for about 10 minutes.

For the filter of the vertical air conditioner, it is not difficult to clean, as long as you follow the nine steps introduced above, slowly and carefully, you can successfully clean the filter.

The air conditioning cabinet does not come out of the scenery to hear, it turns out that the filter is too dirty, teach everyone how to clean the filter.

Here's how:1. First of all, there are two covered screws on the panel of the cabinet machine, and use a tool to pick the cover that covers the screws. As shown in the figure below:

2. Pick open the cover, use a screwdriver to take out the two screws, and keep the screws removed. As shown in the figure below:

3. After unscrewing the screws, remove the cover plate, and then take out the filter inside. As shown in the figure below:

4. The filter screen is covered with a lot of dust, for the health of the air conditioner and the effect of the air conditioner, we need to clean it regularly, and use a brush to brush off the dust first. It can then be rinsed under the tap with laundry detergent. As shown in the figure below:

5. After rinsing, wait for the filter to dry, and then insert it back in. As shown in the figure below:

The method of disassembling the cabinet air conditioner filter is as follows:

The general filter of the cabinet air conditioner is at the side and back, and there is a buckle next to it, so that the filter screen inside can be pulled out, and the filter can be cleaned with some dish soap, sprayed on it, rinsed with water, and then installed back after drying.

Method Steps:

1.Locate the filter Locate the air conditioner filter, unscrew the two screws on the case, and open the lid to see the filter.

2.Remove the filter After opening the lid, pull out the filter inside.

3.Clean the filter Dust visible to the naked eye is cleaned with a broom first, then pour a basin of water and wash it carefully with a brush.

4.Install the air conditioner back After cleaning, wait for it to dry, and then install it back on the air conditioner cabinet after the filter is dry.

Cabinet air conditioners are the most common type of air conditioners and are the most widely used. After a long period of use, the filter of the air conditioner will accumulate a lot of dust and bacteria, which needs to be cleaned and replaced frequently to ensure air quality and air conditioning maintenance. So, how should the filter of the cabinet air conditioner be cleaned?

The following are the steps to clean the cabinet air conditioner filter:

1.Turn off the power to the air conditioner and disconnect the plug.

2.Open the filter cover on the upper part of the cabinet (some air conditioners are in front of the fuselage).

3.Take the strainer out.

4.Wash the strainer with clean water and dry with a towel.

5.Put the cleaned filter in a ventilated place to dry, and cannot be directly put back in place for use.

6.Reinstall the filter, paying attention to the direction and position when installing.

7.Close the strainer cover and plug it in.

It should be noted that when cleaning the filter screen, do not wipe or scrape with brushes, scrapers and other tools, otherwise the filter will be damaged. In addition, the strainer cannot be cleaned with hot water, which can deform the grid. It is best to use tap water to clean the strainer.

In addition to cleaning the filter regularly, it is also necessary to pay attention to keeping the indoor air clean when the air conditioner is running, do not smoke, do not use chemical cleaners, fragrances, air fresheners, etc., so as not to cause harm to the air conditioner and the human body. In addition, when the cabinet air conditioner is not used for a long time, the filter should also be cleaned in time to prevent the growth of bacteria and mold.

All in all, cleaning the air conditioner filter is an important part of maintaining air quality and health, and it is necessary to maintain it diligently, clean and replace it frequently.

In summer, there will be more opportunities for air conditioning to be used, and air conditioning will inevitably accumulate dust, especially the dust on the filter screen of the air conditioner will be more, and the dust will accumulate for a long time, it will be easy to breed bacteria, disease, and bacteria, which will eventually have a negative impact on the health of people living in the air-conditioned room. Therefore, it is very necessary to clean the air conditioner regularly in summer, which can not only play a role in the maintenance of the air conditioner, but also protect our health. How to clean the filter of the cabinet air conditioner?

1. Take the filter screen

Before cleaning the cabinet air conditioner, it is necessary to unplug the power socket of the air conditioner to ensure the safety of the air conditioner. And open the doors and windows to ventilate the room. Then use a damp rag to clean the dust on the surface of the air conditioner, and pay attention to the position of the dead corner of the air conditioner.

After that, you can turn on the panel of the air conditioner and remove the filter. Note that there will be a snap between the filter and the filter bracket to flip the left and right air intake baffles of the air conditioner forward, and then push the filter out of the buckle.

2. Wash the filter

After removing the filter, you can use the tap water hose to flush it, if the more urgent water hose can't rinse it out, you can use a soft-bristled toothbrush to help clean, remember not to use a hard-bristled toothbrush to prevent it from causing damage to the filter, and then rinse with water, both sides of the filter need to be cleaned in place. If it is really difficult to clean, you can spray a mild detergent on the filter and wait 5 to 8 minutes before rinsing with water.

3. Dry the filter

After cleaning the filter, you need to put the filter in a ventilated and cool place, let it dry by itself, and do not put the filter in the sun, otherwise it is easy to damage the filter, because many filters are plastic, and it cannot withstand high temperature exposure.

1. Open the air inlet grille

2. Gently push up the center protrusion of the filter screen, and then pull down:

3. Install the filter screen

Note: 1. Unplug the air conditioner socket before cleaning and turn off the air conditioner;

2. When installing the filter screen, do not install the left and right sides of the circle, and refer to the steps of disassembling the file when installing;

3. You can directly use warm water to clean the filter screen. In order to be able to clean, you can use detergents and detergents in the cleaning process, and you can use a brush to brush them. It is recommended to use a soft brush for brushes, and avoid using a hard brush to break the gap between the filters.

Attached is the method of removing the filter screen of other models: