How to use a mobile phone to open a community access control, how to use a mobile phone to open a co

If you are using a Huawei phone.

Add an access card.

The following conditions must be met:

1. Make sure that the NFC of the mobile phone is turned on and the network status is normal;

2. Check whether the phone supports it;

3. At the same time, upgrade HUAWEI Wallet to HUAWEI AppGallery.

Please do it according to your wallet version:

To check the wallet version: Wallet > My > About.

1. HUAWEI Wallet version or above:

1. Go to HUAWEI Wallet > Smart Card > Access Control Card, and go to the Add Access Card page.

2. Click on the simulated physical access control card, paste the physical door card on the NFC sensing part of the mobile phone, and automatically simulate the access control card after the card is successfully read.

3. Simulate the style and name of the access card after success, and then click Finish to add successfully.

2. Huawei Wallet Version:

1. Go to HUAWEI Wallet > Card Wallet > Access Control Card, and go to the Add Access Card page.

2. Click on the simulated physical access control card, paste the physical door card on the NFC sensing part of the mobile phone, and automatically simulate the access control card after the card is successfully read.

3. Simulate the style and name of the access card after success, and then click Finish to add successfully.

3. Huawei Wallet versions are as follows:

1. Go to the HUAWEI Wallet > Card Wallet > Key, and go to the Add Key page.

2. Click Simulation, paste the physical door card on the NFC sensing part of the mobile phone, and automatically simulate the door key after the card reading is successful.

3. Simulate the style and name of the door key after success, and then click "Finish" to add successfully.

Take Huawei phones as an example.

Usually, if you set your mobile phone directly to NFC on, you can use your mobile phone to open the community access control.

You don't have to carry an access card anymore.

Use your phone's NFC function to copy a card only. If the phone doesn't have NFC function, there's no way.

2. Enter the "Wallet" page and you can see the "Door Key" option, click to enter, and then click the "Add" button;

3. Put the access control card on the back cover of the mobile phone, and the mobile phone will automatically turn on the NFC function and read the access control card;

4. After reading the access control card successfully, click the "Add" option below, and then the system prompts that you need to verify the password of the mobile phone account, enter the password and click OK;

5. The mobile phone will automatically add the access control card, and then you can set the name of the card, and finally click "Finish", so that the mobile phone is successfully bound to the access control card.

1. Click on the wallet app on your phone.

2. Find the simulated words of the door card in the wallet, and click to start detection, and set a 6-digit password after the detection is over.

3. Put the key card in the place where the NFC antenna is on the phone, and then click directly to start the simulation.

4. Wait patiently for the mobile phone to upload the personal information in the door card, click Authenticate immediately after the upload is successful, and redraft the name of the door card.

5. When entering and exiting related occasions, you can swipe the card directly through the mobile phone.

Xiaomi mobile phones have already launched the access card function, and Huawei mobile phones, which are now aware of the hindsight, have also added the "door key" function in the "wallet" app in the internal beta version. Using this function in combination with the NFC of the mobile phone, you can turn your Huawei mobile phone into a door key in seconds, and easily open the door. Avoid the trouble of forgetting to bring your access card and waiting for a long time at the gate of the community.

Most of Huawei's NFC-enabled phones can use this feature. For example, P20 series, Mate10 series, Honor 10 and so on.

The first time to get the beta version qualification, at the same time, there is also a leaked beta installation package in the Huawei pollen forum, you can go to search for installation. Next, we will teach you how to use the feature.

First of all, you need to determine whether the Huawei phone you are using has NFC function, the easiest way to check it is to open Settings - Device Connection, to see if there is an NFC option.

After confirming that you have this feature, open the beta version of "Wallet" (it will be open beta later) and click "Portkey". Select the "Add" button below and place your access card close to the NFC reader behind your phone, and the phone will automatically read the card. After the read is successful, the addition can be successful.

The currently supported "door keys" can be referred to the following figure.

In actual use, this function can completely replace physical cards. The response is very fast when brushing the access control, and there is no failure. However, some access control cards can be read and added to the mobile phone during the test, but the door control cannot be opened.

At the same time, Huawei phones do not need to verify personal information when recording access bans. When Xiaomi mobile phones are recorded for access ban, real-name authentication is required before entry. We look forward to further improvements in this feature. Have you experienced the access control with a Huawei mobile phone?

Turn on the NFC function of the mobile phone, paste the access card on the back of the mobile phone to copy, and then enter the community to paste the mobile phone on the access control card.

First of all, you need your phone to have NFC capability. Let's take Huawei phones as an example to illustrate (most Huawei phones have this function):

1. After we turn on the NFC function of the Huawei phone, enter the Huawei Wallet, and then click on the option of the door key to enter.

2. After entering, we select the Add option in the page to enter the Add interface.

3. After entering, we select the option to emulate the existing door key to the mobile phone.

4. Click to enter the simulation interface, and we will put the access control card on the back of the Huawei phone to read it.

5. After the reading is successful, the page will enter the simulation state, and we can wait for the simulation progress to be completed.

1.Turn on the "NFC" function of your phone. Find the "Wallet" software that comes with your phone. Take the Honor phone, for example.

2.Open "Wallet" and find "Card Pack".

3.You will see that there are many types of cards, we find the "key" - "swipe the phone to open the door".

4.You'll see the "Neighborhood Neighbors" option, where we can add access to our own neighborhood and a friend's access so we don't have to register or have a friend claim it.

The mobile phone can also use the access control function, as long as the function of your FC binds your access control to your mobile phone, so that you can swipe the mobile phone into the community in the future.

This must be matched with the system, the equipment and the system have this function, and the corresponding settings can be adjusted, otherwise it will not be realized.

First of all, you have to have a mobile phone NFC function, bind your access control card after opening, as long as the access control system also supports the mobile phone to open the door.

What you want to ask is how to use the mobile phone access card function to open the door handle of the community. First of all, the community access control system is not encrypted, that is to say, the card you use is not encrypted, if it is encrypted, then copy the card to your mobile phone, you must use a decoding device to add to your mobile phone. The access control machine can be recognized.

If you want to use the access card function on your mobile phone, you first need your mobile phone to support the NFC function, you can check your mobile phone settings to see if there is an NFC function, if there is this function, you can enter the NFC settings, and then set up the access control card, put the physical access card on the mobile phone NFC and choose to copy, wait a while to copy successfully, so that your access card will be copied to the mobile phone, and you can use the mobile phone to swipe the access control in the future.

The first is NFC-enabled phones. Then, make a virtual door card, that is, read the information on the access control into the virtual door card. In the future, you can swipe your mobile phone virtual door card into the community.