Kneel and beg for comic dot paper Dotted paper for comics

Pattern mesh can be homemade! Use Photoshop to create a new layer with 50% grayscale (the resulting dots are also 50% grayscale) and fill it with the appropriate pattern.

There is a special ** brush address inside, which has a "daily necessities and animals and plants" (the specific name is not clear), there are a variety of romantic brushes in it, you can go to **try it.

Pattern Net:1 Create a new transparent layer in Photoshop.

2 Dots a dot with a pencil with a diameter of one pixel.

3 Perform "Filter" - "Stylize" - "Find Edges".

4 Repeat "Find Edges".

5 You will see that the dot, which was originally only one pixel, gradually changes into various patterns, and the only thing that is inconvenient is the shape of the square. Repeat the filter until the pattern you want appears.

6 Save the image in the appropriate format for later recall. That's it!

But the dot paper is scraped or cut well, I have bought two kinds, 12 and 8 yuan, 12 can be scraped, 8 is a little inferior, scraping almost can not come down, but will be wiped off, just use cutting, 12 is not sold

It seems that there is another kind of ...... of printing netsPrinted directly, no glue, and there is no non-sticky glue on the back of the mesh paper

That, the plastic mesh I bought is 5 yuan each, and the quality is also very good!

Also, isn't there a comic tool for selling in the last few days of "Manyou"? The price is not expensive, and the quality is guaranteed, but you have to figure out what kind of rubber net it is talking about.

The most annoying thing is the background network.,I can't find what I like.,And the technology of photo shop is not very good.,Learn slowly--。 —

There are always good stories but too lazy!

Often, after drawing a character, when I draw the same person, I feel very different, and it's very troublesome

Rubber mesh is expensive! One for thirteen! There is a translucent dot that is very easy to use, but there is no glue on the back, if you accidentally paste the wrong one, you can also tear it off from the paste, the toughness is very good, ** is about 10 yuan, and the general art store sells it. Great for beginners.

The manga dot paper is introduced as follows:

1. Concept: The network paper is divided into paper netizens from the material, plastic mesh paper, etc., the network paper is a transparent thin sticker, with patterns, commonly used point composition, and other patterns or patterns;

2. Usage: Network paper is a commonly used material in good-selling comic works, mainly for shadow effects and special effects, such as clothes, hair, sky, architecture and other comic production, commonly used to deal with gray tones;

3. Usage: The medium of dot paper is thinner paper, the cost is lower, but it needs to repeat the line, the operation is more cumbersome, and the redraw dot paste edge line is easy to overlap, and the use method is mainly three, including the cover paste method, the hollow paste method, and the copy painting method.

You must be buying one of those translucent non-adhesive paper mesh bars? That kind of net is disposable, and it cannot be torn if it is glued, and the dots of that kind of net are not scraped with a knife but should be covered with white masking liquid. It is generally recommended that beginners in comics do not use this kind of outlets, which are thin and not strong, and beginners who have just learned to use outlets if their hands are not accurate, and they will be broken or cut off (if they are not particularly easy to use a wallpaper knife), it is easy to scrap if they are not sticky!

And the kind of paper mesh is ultra-thin, ......If there are traces left during the draft, they will be revealed!

It is recommended that you be careful and do not rush to apply glue and adhesive mesh ......After the comic sketch is finished, put the paper net on it and trace the outline (be sure to aim for it!). Then cut it out along the contour with scissors, and finally glue it (stick it with tweezers as much as possible, because you may break the paper mesh if you use it directly with your hands) and the glue should not be applied too much (the tissue paper mesh will wrinkle when wet), preferably a solid glue stick.

It is recommended to take a good look at the paper when you buy the dot paper, I personally think it is better to have a plastic net, although it may also damage the drawing paper if it is glued wrongly, but it is much more insured than that paper net! If you feel that the glue is not accurate, it can be lighter, and if it is heavy, it will not destroy the ...... of the manuscript paper

And nowadays, there are very few comics on the market that use paper screens......Paper mesh is cheap but particularly impractical......Beginners are often fooled because it's cheap! (I was fooled by TOT!.))

Personally, I think it's still a suitable ...... for the plastic meshIt's not particularly expensive, and there are a lot of model patterns, and it's more commonly used!

Haven't used it - is there a special glue? Isn't it faster to use a computer to connect to the Internet? . .

Paper dot paper:

The medium is thinner paper, which is less costly, but it needs to repeat the line, the operation is more cumbersome, and the lines that are easy to overlap and paste the edge of the retrace dot will be rougher. There are three main ways to use it: overlay paste, hollow paste, and copying and drawing.

a. Overlay pasting method: The method of attaching dot paper to the original screen.

1. Overlap the three sheets of "original copy paper (blue paper) dot paper" in order, retrace the original outline along the desired outline with an inkless ballpoint pen (to avoid damaging the original lines) on the original, and trace the outline of the pattern on the dot paper through the carbon paper.

2. Use scissors to cut or place the dot paper on a thick plate, use a utility knife to draw out the required dot paper pattern, coat the back with glue (it is recommended to use a solid glue stick), and paste it on the original.

3. Finally, add lines to the dot paper on which the original manuscript is pasted.

b. Empty pasting method: the method of pasting dot paper on the back of the original screen.

1. Draw the outline on the original manuscript with a utility knife, and remove and leave blank the part of the original that needs to be pasted with the net.

2. Place the dot paper in the original cavity, draw the outline that needs to be cut on the dot paper with a pencil, and cut it out, paying attention to leaving the edge for pasting when cutting.

3. Paste the dot paper behind the hollow of the original manuscript and supplement the lines of the original.

4. This method is simpler and more efficient than the above method, but because it is cut directly on the original manuscript, the knife technique is not good, and it is afraid of accidents.

c. Copying and painting method: The comprehensive use of the above two methods has many steps, but the original effect is particularly good.

1. In the final stage of the pencil of the original manuscript, the dot paper should be pasted with any of the above methods, but pay attention to the lines drawn by the pencil should not be too heavy, and the edge of the net should not be inked, which will affect the copying effect.

2. Make a copy of the pencil manuscript pasted with the dots, draw good lines with a pen and brush on the copy, and the picture after the finished draft will not produce a sense of patch after pasting the net, and the copying effect is good and can even make the original manuscript achieve the effect of printed matter. It is worth considering when drawing paintings for gifts, which not only have the ink sense of hand-painted works, but also have the special effects of outlets, and can be copied in batches, with high efficiency and high yield, and a wide range of thin seeds. This method can also be used in the use of film dot paper.

Mesh paper can be roughly divided into Japanese original nets.

Cut the same dot paper according to the outline of the figure and apply it.