How to recover win10 into safe mode

1) Method 1: Click the Start Menu button > All Apps > Computer Settings, switch to "Update & Restore", then switch to "Restore", and finally click the "Restart Now" button under "Advanced Startup".

2) Method 2: Press the Win+C key to open the Win10 charm, click "Device", then click the power button, and then click "Restart" after holding down the shift key to enter the boot menu.

2.After the computer restarts, it will enter the boot menu, select Troubleshooter > Advanced Options > Boot Settings, and press the "Restart" button.

3.Once your computer restarts, you'll see the option to enable Safe Mode. Also includes:

Enable options such as debugging, logging, low resolution**, Safe Mode with Networking, Safe Mode with Command Prompt, Disable Driver Enforcement, Pre-Activate Anti-Malware Protection, Disable Auto Restart After Failure, and press F10 to enter Recovery Mode.

After entering win10, click on the start menu and then click on [computer settings] Note: If you don't see this setting here, it is recommended to take a look at the experience of [win10 start menu program how to customize]. You can see it at a glance.

Updates and Restores.

Click Restore under the Update and Restore screen, then click Restart Now under Advanced Startup, select an option, and select Troubleshoot

Troubleshoot the middle of the advanced options.

In the advanced options, tap Startup Settings

Click the Restart button.

The computer will restart at this time, and after restarting, you will see this interface as shown in the figure below. Press [F4] or the number to select the safe mode. Other modes are also selected using this method, and after selection, they will go directly to it.

As shown in the figure below, it is the security mode of win10. You can do antivirus and debugging here.

win10How do I return to normal mode and boot my computer after entering safe mode? When we use the computer, we will often encounter problems, at this time we will often enter the safe mode to find the problem or to repair the problem and stare at the dry, but many friends do not understand the content of recovery after reading the tutorial to enter the safe mode, and then they don't know how to quit the hole, so today I will bring you the win10 system to restore the normal mode of the method, I hope it will help you.

The specific steps are as follows:1.We press "win+r" to open the run dialog box, and then enter the command "msconfig" in it, and press enter to confirm;

2.In the system settings window, we click on the "Boot" tab, then we uncheck the "Safe Boot" check, and then click on Confirm;

3.After that, you can restart the system.

Safe mode is a mode that comes with the official version of the win10 system, if there are some problems in our computer, you can fix it. But how to fix the system in win10 safe mode? Some netizens who are not familiar with computers may not know much about it, so what I will share with you today is the method of repairing the system in win10 safe mode.

Here's how:

1. Virus detection and killing.

Nowadays, the computer will sometimes be infected by viruses if you are not careful, but there are many viruses that cannot be removed when many antiviruses are in normal mode of windows, so at this time we can use the method of entering the safe mode, and the windows system will only load the necessary drivers, so that the virus can be completely removed.

2. Delete stubborn files.

Sometimes in the process of deleting files, I will encounter "the file is being used, it cannot be deleted", in this case, we can use safe mode to delete it, because in safe mode, Windows will automatically release control of these files, so you can easily delete these stubborn files.

3. Restore system settings.

Sometimes we will install some software on the computer, or accidentally change some settings that cause the system to fail to boot normally, you can also enter the safe mode to solve, if it is the reason for the new installation of software, you can uninstall it in the safe mode, if it is because of changing some settings to change it back, after forgetting the password, resulting in the inability to operate the computer normally, you can also enter the safe mode to change.

4. Fix system failures.

When the Windows system is unstable or cannot boot normally, you can switch to safe mode to boot, and then restart the computer to check whether the system has returned to normal.

5. Find out malicious self-starting programs or services.

If there are some other errors in the computer, such as not being able to access the network, and then checking that there is no problem, you can boot it into the safe mode with network connection to see, if the network can be connected here, it means that some self-starting programs or services have affected the normal connection of the network, and you can fix it here.

6. System restore function.

If the computer fails to boot and can only go into safe mode, then we can restore the system in safe mode by: after entering the safe mode, click "Start All Programs Accessories System Tools System Restore", after opening the System Restore Wizard, select the "Restore my computer to an earlier time" option, click "Next", click on the displayed daily code mining date on the calendar to select the system restore point, and click the "Next" button to enter the system restore.

The above is about the win10 safe mode repair system method, users in need can refer to the above method.

When many users use the computer, they will need to enter the safe mode to repair the computer when they encounter system problems, so how to repair the computer, let's take a look at his specific method tutorial.

Safe Mode FAQ].

How to fix a computer in win10 safe mode:

Method. 1. Tuanla.

1.Enter Safe Mode.

2.to My Computer, Right Click Properties, Advanced, Boot and Fault Management.

3.In the settings, remove the automatic restart check in the system failure.

4.Enter the normal mode to start the movement, the pants stool system will be blue screen, look at the blue screen information, see which file is the crash, generally the driver.

5.Remove the driver or delete the drive file as appropriate.

Method 2, 1Close all programs.

Open Run, type msconfig in the Open box, OK.

3.In the System Configuration Utility, "boot.."ini tab. Are you sure.

4.Reboot and you can enter normal mode.

Method. Third, it is still not possible to restore the system or reinstall the system that comes with the system to restore:

1.Start Programs Accessories System Tools System Restore.

2.Click on "Restore my computer to an earlier time".

3.Press Next and you'll see a dark date on the answer side of the date page, which is the restore point.

Win10 into safe mode method:

Tool: win10 system.

Safe mode. Collective Steps:

1.Press the "win+r" button combination at the same time in the win10 system, enter the command: msconfig in the open run dialog box, and then click OK.

2.Click to open the System Configuration window and select the Bootstrap tab.

3.Under the Boot tab window, check the Safe Boot (f) under Boot Options, and then click OK.

4.After clicking, the system prompts that after restarting, it will enter safe mode.

5.After clicking Restart, the win10 system is booting up.

After the system restarts, enter the password and click the icon to log in to win10 security mode.

7.After logging in successfully, you will enter the security mode of win10.

The above is how to enter safe mode in win10.

Method 1:

1.Enter Safe Mode.

2.to My Computer, Right Click Properties, Advanced, Boot and Fault Management.

3.In the settings, remove the automatic restart check in the system failure.

4.When booting into normal mode, the system will blue screen, look at the blue screen information, see which file is the crash, generally the driver.

5.Remove the driver or delete the drive file as appropriate.

Method 2, 1Close all programs.

Open Run, type msconfig in the Open box, OK.

3.In the System Configuration Utility, "boot.."ini tab. Are you sure.

4.Reboot and you can enter normal mode.

Method 3: It still doesn't work to restore the system or reinstall the system that comes with the system

1.Start Programs Accessories System Tools System Restore.

2.Click on "Restore my computer to an earlier time".

3.Press Next, you will see that the date page has a dark date, that is the restore point, select, click Next to restore.