ThinkPad E530c laptop, can I expand memory? How much is the maximum? Ask for another copy of the off

Dear Lenovo users, hello!

Hello, the number of memory slots configured by your computer is: 2, and the memory specification is: PC3-12800 1600MHz DDR3.

The maximum memory capacity of a single memory slot is 8 Gbit/s, and the maximum memory capacity of a whole machine is 16 Gbit/s.

In addition, I would like to share with you the recommendations for adding memory:

1. It is best to maintain the same specifications as the standard configuration of the additional memory, there are not too many requirements for the brand, it is recommended that you install the memory produced by regular manufacturers, such as Kingston, Samsung, etc. In order to rule out compatibility issues, it is recommended that you bring the machine with you when you buy it, and then add it after the actual test can be used normally.

2. If it is a memory with different specifications of the installed and pre-installed memory models, it may be used at a reduced frequency after installation, and there may be incompatibility problems, if you want to install a memory that is different from the pre-installed model, you need to carry out the actual installation test, if the system can be identified normally, it is recommended that you buy again.

3. In addition, it should be noted that the operating system will also have restrictions on memory recognition: if it is a Windows 32-bit operating system, it can generally only recognize about 3G memory size due to system limitations. If you need to identify 4GB or more of RAM, it is recommended to replace the 64-bit operating system.

ThinkPad E530C There are two configurations, you didn't say,I can tell you about the two configurations,E530COne is I G DDR3 1600,The second is i3 2G 1600 NV graphics card + integrated 3000) No, which configuration is not recommended for you2G+4G This hybrid method,Either 2G+2G、Or4G+4GNow the memory** is the lowest2G and 4G are not different30-40 yuan, the best configuration is4G+4G+win7's 64-bit system (32-bit XP and win7 can only recognize the memory at most) 64-bit system now how much existing memory can be recognized, win8 does not have a 32-bit system, before adding memory, it is recommended that you go to a hardware detection software such as Master Lu, check what manufacturer your memory is, what is the running frequency, add memory to be a manufacturer with the original memory, memory of the same size and frequency, otherwise there will be incompatibility, such as blue screen, inexplicable crash and other phenomena, Master Lu** address.

First use Master Lu to detect what brand the original memory module is, how many generations it is, what is his main frequency, and most importantly, what is the model, as long as it is a brand, the model is the same, and there is almost no compatibility problem between memory modules. If you add 2G then your 32-bit system will not be able to fully utilize the 4G memory, so it is recommended that you install a 64-bit system. In the past, it was said that the compatibility of 64 was poor, but now for the software that is updated frequently, there is no longer any compatibility for software that is not innovative.

For example, the previous 2004 version of CAD software did not support 64-bit systems, but the 2007 version did. The 64-bit system actually makes full use of your hardware resources, theoretically the 64-bit system is twice the speed of the 32-bit system, not that it is useless to increase it, you are now 2G, you can increase the memory at most, and the system will not be recognized.

Use Master Lu to detect it,Then open the back cover to see the memory card slot,Remember the look,Just buy it again,Change to the same model,win7 32-bit maximum support to memory,If the memory is exceeded,It is recommended 64-bit system,You can ask questions。 Hope to adopt.

Maximum compatible ,!!See if you're DDR3 and how much Hz is there