How to use a mobile phone as a speaker in a computer, and can a mobile phone be a speaker outside th

Multi-screen interaction, it should be fine.

Refer to the following:1First, turn on your computer and click on the "soundwireserver" icon.

2.Then, write "Server Address" in the interface.

3.Once you turn on your phone, tap on the "soundwireserver" icon.

4.Then in the interface, enter the "Server" content.

5.Then in the interface, click on the "connect" button.

No.

The headphone jack and Bluetooth of the mobile phone only have an output function, and there is no input function, so it is still difficult to realize the mobile phone as a speaker for the computer.

In addition, the speaker function of the mobile phone is still far from that of the computer. Don't say that it can't be compared with the external speaker of the desktop machine, even the built-in speaker of the notebook. The main thing is that the grade and performance of the hardware are incomparable. So, even if it is realized, the effect is also very poor.

So to listen to the computer, it is best to buy a Bluetooth headset or Bluetooth speaker.

Scope of application of computer speakers.

Mainly suitable for iPod, MP4, mobile phone, PSP game console, computer products, etc. Depending on the interface, there are also differences in the devices that can be connected.

The speaker is the terminal of the entire audio system, and its function is to convert the audio electrical energy into the corresponding sound energy and radiate it into the space.

It is an extremely important part of the sound system, because it is responsible for the key task of converting electrical signals into acoustic signals for the human ear to listen directly, and it has to deal directly with the human sense of hearing, which is very sensitive, and has a strong ability to distinguish the timbre of complex sounds.

Because the subjective perception of sound by the human ear is the most important criterion for evaluating the sound quality of an audio system, it can be considered that the performance of the speaker plays a key role in the playback quality of an audio system.

Connect your phone to your computer and use your phone as your computer speaker. This seems to be impossible to connect, even if it can be connected, it is also troublesome, it is better to use other methods to be simple and convenient. I'm going to introduce you to a way that you can do as long as you have a little bit of electronic installation ability.

It is to install a single-tube speaker with a triode, and then use the computer audio output as the sound source, input to the single-tube speaker, and drive a speaker to make sound. In fact, the transistor is easy to find, such as the circuit board with ** in the waste electric toys, and the circuit board of the waste electrical appliance. Soldered with an electric soldering iron, as long as you find the three electrodes of the EBC of the triode (silicon tube, germanium tube can be used), you can install it with the following (silicon tube) circuit diagram:

The speaker can be used with a 2 3-inch paper cone with low power, the sound is much better than the mobile phone, and the volume is not small. (If the triode used is a germanium tube, the positive and negative poles of the power supply in the circuit diagram are reversed) If you need help during installation, please continue to contact.

It is recommended not to use it in this way, and the long-term high-power use of the mobile phone is easy to make the mobile phone speaker aging or even damaged.

Refer to the following below:

1.First, turn on your computer and click on the "soundwireserver" icon.

2.Then, write "Server Address" in the interface.

3.Once you turn on your phone, tap on the "soundwireserver" icon.

4.Then in the interface, enter the "Server" content.

5.Then in the interface, click on the "connect" button.

Theory is ok, but rather cumbersome. If you think your phone speakers are good, you can try it, but it doesn't make sense, and it doesn't work out well. You need a frequency converter that's something like a sound amplifier. If it's that complicated, it's better to honk it.

Yes, but you need a cable to connect to your computer.

Get the following tools ready:1. A great god who loves to explore black technology.

2. One PC device with Windows Vista 7 8 10 operating system.

3. One mobile phone device with the operating system or above.

4. Necessary software: synchronous listening to PC and mobile phone client.

5. Auxiliary software: drive life PC client.

AcousticsThe principle of horn sounding.

A very important piece of equipment in the sound system is the speaker, which is generally composed of a speaker unit and a cabinet. The speaker unit is used as a component to generate sound, and the cabinet is used as a supplement to the speaker unit to correct the sound. The sound principle of the speaker unit is a conversion of electrical energy into sound, when different electronic energy is transferred to the coil, the coil produces an energy that interacts with the magnetic field of the magnet.

This interaction causes the paper tray to vibrate, because the electronic energy changes at any time, and the coil of the horn will move forward or backward, so the paper disc of the horn will move with it, which will change the density of the air and produce sound.

That's not going to work. If you want to use a speaker, you also need to add a power amplifier before it is released, because the audio output of the computer is the previous value, and the power is very small, so it can only be used for headphones and the like.

No, computer audio.

It's output through the front and rear sockets.