When to set up a rain bucket, the difference between a falling water bucket and a rain bucket

1. The roof rainwater bucket is used to drain rainwater, and the open-air roof should be installed;

2. Side drainage refers to the drainage method, not the type of rainwater, and the corresponding rainwater bucket is installed according to the needs of the building;

3. There is no need to install a rainwater bucket on the roof without catchment area;

Stormwater inlet refers to the facility of the pipeline drainage system to collect surface water, and the structure that collects rainwater on the stormwater pipe canal or confluence pipe canal, which is composed of an inlet grate, a well body and a branch pipe, etc., is the basic component unit of the stormwater system. Rainwater from the roofs of roads, squares, meadows, and even some buildings first passes through the grates.

It flows into a stormwater inlet and into a river or lake through a connecting pipe. The rainwater inlet is the entrance for rainwater to enter the underground of the city, an important facility for collecting rainwater on the ground, and a channel for sending rainwater from the sky directly to the urban rivers and lakes, which is not only the bottleneck of the urban drainage pipe system to collect rainwater runoff, but also the urban non-point source.

The primary channel for pollutants to enter the water environment.

The rainwater bucket is a common accessory for the roof drainage pipe of the building, which is located on the roof of the rainwater gutter.

Enter the entrance to the storm sewer. The rain bucket has a rectifier grille.

The device can quickly remove the roof rainwater, and the grille has a rectification effect to avoid the formation of excessive vortex, stabilize the water level in front of the bucket, reduce aeration and quickly remove the roof rainwater and snow water, and can effectively block larger debris.

1.Quickly remove rainwater from the roof.

The rainwater bucket is located at the entrance of the rainwater pipe from the gutter on the roof. The rainwater bucket has a rectifier grid device, which can quickly remove the roof rainwater, and the grid has a rectification effect to avoid the formation of excessive vortex, stabilize the water level in front of the bucket, and reduce aeration.

Quickly remove rainwater and snow water from the roof.

2.Block out clutter.

The grating of the rain bucket keeps out large books and other debris so that it doesn't clog the drain or drain.

3.Decorative.

Nowadays, there are various types of rainwater buckets, and the production is also very exquisite, and placing them on the roof can make the house look more beautiful as a whole.

Extended information: Classification and performance of rain buckets.

The siphon rain bucket is made of the siphon rain bucket chassis and stamped with high-quality 304 stainless steel material. The pressure ring and shroud are made of duralumin alloy and zinc alloy die-casting, which have the characteristics of corrosion resistance and extrusion resistance.

Rainwater buckets are divided into three categories: 87 type, 79 type, 65 type, siphon rainwater bucket and weir rainwater bucket. Nowadays, the most commonly used are the 87 type (79 type, 65 type evolution) and siphon rain bucket.

The siphon rainwater bucket has a large single displacement, flexible distribution on the roof, and the appearance is also suitable for the artistic shape of modern buildings, and it is easy to meet the rainwater drainage of irregular roofs. The design of the anti-vortex makes the drainage efficient and quiet.

Hello, happy with your question.

Rainwater hopper is located on the roof of the rainwater by the gutter.

Enter the entrance to the storm sewer. The rain bucket has a rectifier grille.

The device can quickly remove the roof rainwater, and the grille has a rectification effect to avoid the formation of excessive vortex, stabilize the water level in front of the bucket, and reduce aeration.

Quickly remove the roof rainwater, snow water, and can have a large debris (mainly by the side of the grille), do not let it flow into the pipe, if it is a siphon rain bucket, it should also have a forced destruction of the vortex (located in the middle of the rainwater bucket), rainwater horizontal height submerged on the rainwater bucket of the forced destruction of the vortex sheet, to prevent air from entering.

Hope it helps.

Downspouts and rainwater buckets are two popular plumbing system structures in home buildings, and they play different roles in home buildings.

Downspouts, also known as drain pipe systems, are used to deal with drainage on roofs and podiums. Its main function is to direct rainwater from the roof into the sewer system, avoiding water leakage or other damage problems. The sinkhole is usually installed near the side of the house to quickly channel rainwater into the drainage system and keep the inside of the house dry.

Unlike a sinkhole, a rainwater bucket is a rainwater bucket that is collected and stored in a specific tank by the roof. This process makes use of the natural resources of rainwater and then drains the water from the tank through a bottom drainage facility. Therefore, the rainwater bucket is also known as the rainwater collection system or the rainwater system.

Compared to traditional downfall bucket systems, rainwater buckets make better use of natural resources. Rainwater can be used to irrigate plants or as a source of water to flush toilets. In addition, rain hoppers are often designed to be energy-efficient, reducing the need to use household tap water, which in turn reduces the household's water bill.

To sum up, although the sinkhole and the rain bucket are both plumbing systems that deal with stormwater problems in home buildings, their functions are very different. Downspin hoppers are used to drain rainwater away from the foundations of surrounding houses, while rainwater hoppers are systems that collect rainwater for irrigation or to save energy. Therefore, when choosing to install a plumbing system, homeowners need to choose the right system installation according to their own needs and environmental awareness considerations.

The building rainwater bucket is a part of the building that connects the trench that concentrates rainwater with the drainage pipe.

The rainwater bucket is located at the entrance of the rainwater pipe from the gutter on the roof. The rainwater bucket has a rectifier grid device, which can quickly remove the roof rainwater, and the grid has a rectification effect to avoid the formation of excessive vortex, stabilize the water level in front of the bucket, reduce aeration and quickly remove the roof rainwater and snow water, and can effectively block larger debris.