-
Anonymous users2024-02-06Check the location of the inlet of the outside air and, if necessary, open the hood; Start the engine and open the window.
Turn the automatic switch and air conditioner switch of the air conditioner to the position, turn on the external circulation mode of the air conditioner, introduce the outside air, and adjust the switch of the air volume of the air conditioner to the maximum.
Insert the attached catheter tightly into the nozzle. Please make sure that there is no air leakage at the connection when pressing the valve.
Try to find the location of the suction power of the air conditioner inlet (you can test it by hand or waste newspaper and find the maximum suction power of the air intake, which varies according to the type of car).
In the driver's seat, after shaking well, insert the catheter port into a deeper position in the direction of the passenger seat.
After shaking well in the passenger seat, insert the catheter orifice into a shallow position. In either case, insert the catheter where the suction is greatest at the air inlet of the air conditioner.
Press the nozzle button and rotate it to the right to a position where it can no longer be rotated, and the powerful foam will automatically spray out. When it comes time to remove the hose, rotate the nozzle button to the left to return to its original position.
After fully filling the air conditioner cleaner (about 2 minutes), wait for the fan to rotate for 10 to 15 minutes, then turn the switch of the air conditioner fan to the off position and turn off the engine. After about 10 minutes, there is a waste liquid flowing out of the discharge port.
-
Anonymous users2024-02-05There is a device in the Tiger Automobile Air Conditioning Fault Diagnosis Chain Service Center that is aimed at system cleaning
-
Anonymous users2024-02-04Remove the locker in front of the co-pilot, remove the blower, and clean it with detergent!! The place where the blower is installed should also be cleaned!!
-
Anonymous users2024-02-03Turn on the internal circulation, turn on the air conditioner, and turn it on.
-
Anonymous users2024-02-02The distribution steps for cleaning the car air conditioner by yourself are as follows:
1. Buy a bottle of foam cleaning disinfectant: "Household Car Air Conditioning Cleaning Agent".
2. Find a place with fresh air (remember to be sure to clean the air, because you have to take out the air conditioner partition later), open the front cover, take out the air conditioning partition at the air inlet position in front of the passenger seat, open all windows, prepare a cloth and wait for the air outlet.
3. Start cleaning: ignition, turn off AC, use external circulation, the maximum 4 levels of air volume, remember to blow the wind towards the driver (that is, not to the feet), and then insert the catheter into the cleaning agent and shake it vigorously against the air inlet in front of the co-pilot. Spray in the foam, pay attention to the foam at the air outlet, and use a cloth ready to dry the foam at any time.
4. After completing the above steps, leave it alone with the wind, let it blow for about 10 to 15 minutes, then turn off the wind, turn off the fire, let the dirty water leak out of the drain pipe under the car, and wait for a few more minutes; After a few minutes, look at a large area of sewage underground, indicating that the air conditioner has been cleaned.
-
Anonymous users2024-02-01One minute to take you to understand the 6 ways to clean the car air conditioner, learn these, no longer have to go to the repair shop to spend money, let's take a look!
-
Anonymous users2024-01-31Cleaning the air conditioner depends on what part you clean, if it is a condenser, it is relatively simple, you can blow it directly with compressed air... Just blow the dust clean... If it is the whole cleaning, it is too difficult, and there are too many places to dismantle.
-
Anonymous users2024-01-30You can buy a bottle of car air conditioner cleaner and step up the spraying can to spray the cabin air filter before you open the car circulation. Then close all the doors and windows of the car, open the inner circulation, and spray into the car. This is the way it is washed.
The 4S shop was cleaned like this. You'll have to remove the air conditioner filter first.
-
Anonymous users2024-01-29You can buy a cleaning agent for car air conditioners and just spray and wipe it.
-
Anonymous users2024-01-28Are you not afraid that you will not be guaranteed after 4S after cleaning yourself?
-
Anonymous users2024-01-27Put toothpaste, baking soda, and salt in a basin, pour warm water, stir well, wipe the seal stain with a scouring pad, and carefully wipe the cracks to make it clean immediately.
-
Anonymous users2024-01-26There are professional cleaning tools to the place where 4S or car maintenance is located.
-
Anonymous users2024-01-25Buy a bottle of air conditioner cleaner, then start the car, find the air inlet of the air conditioner, turn the air conditioner to the maximum, and spray the cleaner into the air inlet.
First of all, it is necessary to determine whether there is any remaining refrigerant in the system, and if not, it is necessary to vacuum it from the new system and detect leaks. Vacuum must be evacuated at the same time as the high and low pressure interface, if there is still residual refrigerant in the system, it is necessary to eliminate whether there is leakage, the leakage point of the general automobile air conditioner is mostly at the interface and the rubber and aluminum tube pressure joint, with nitrogen pressure and soapy water can be found, the sealing rubber ring of the interface can be solved, pay attention to the type of refrigerant and the corresponding sealing ring when replacing, generally speaking, the automobile refrigeration system can not be completely sealed, under normal circumstances, the refrigerant will generally leak about 3 years, and the refrigerant can be added after the above problems are eliminated. When adding refrigerant, run the engine, turn on the air conditioner, add refrigerant from the low-pressure interface of the system, and check the leak again after adding. If the refrigerant is added after vacuuming, the compressor of some air conditioning systems will not run in the state of no refrigerant, and the compressor will run when the refrigerant is added to a certain Chengdu, which should be paid attention to in maintenance
The methods and steps for cleaning the car air conditioner at home are as follows: >>>More
1. Lack of refrigerant.
Car air conditioners generally add refrigerant once every 2 to 3 years, and some cars even add one plus a year. Even if the air conditioner is sealed very tightly, it still can't resist the refrigerant flying away, plus there are slight leaks in the air conditioning pipeline or condenser. >>>More
The refrigerant filling should be carried out after vacuuming, and there are four filling methods: weighing filling method, gauge pressure filling method, empirical filling method and quantitative filling method. >>>More
Hello! There are many kinds of units, and kg is one of them. Big cars are not the same as small cars. Changes in ambient temperature can make the pressure different. The speed of the car is different, and the pressure is also different. Teach you a few more tricks to test that the car air conditioner is not normal: >>>More