360 indicates that there is a problem with the network connection configuration and whether the IP a

This is because the Internet access mode set by the router does not slide to the right.

Solution: Set up the router again and select the correct Internet access method.

Tools: Computer, Routing Source.

1. Open the browser and enter in the address bar or press the Enter key.

The router detects how you are surfing the Internet. It takes about 5 seconds to wait for the hail to complete.

3. Set the Internet access mode on the pop-up page, choose the first one if it is broadband, dynamic IP Internet access is generally used for enterprises or switches, and static IP Internet access is generally used for Ethernet.

4. After waiting for a few seconds, it will prompt you can start surfing the Internet, if you want to continue to set the iPad (i.e. wifi) information of your mobile phone, please click the Set My WiFi button.

5. Enter the wifi and password in the pop-up window.

6. Wait for the system to complete, and then you can go online after restarting.

This can be set up by following the steps below.

1. Plug in the router power supply first, and set it up after the route starts normally, because the first time you start and install the router, the wifi is turned on by default and there is no password, find the wifi name prefixed with [360wifi] on the mobile phone to connect.

5. Enter the router login password, the login password is your wifi password, you can change the login password after logging in. The upper part of the interface shows the network situation, and the lower half is some function settings, which you will study slowly in the future.

6. In the network speed management, you can check how many people are connected to the router, and you can also limit the network speed of others. If you don't go to 360 to register an account and log in, you can go in and operate your router remotely, and you can see your router from a long distance.

Use the mobile phone router guard to control, select the broadband connection, enter the broadband account password, the router will work normally, manage the router using the router guard, convenient, fast, and remote monitoring.

Hello friend, in such a situation, it is recommended to reset the router and then reset the router on it.

1. If the computer is connected to the modem with a network cable, there is no DHCP service on the modem, and it is naturally impossible to assign a valid IP and DNS to the computer, you can set the IP address and DNS of the local connection by yourself (this has nothing to do with the Internet), and the Internet can be accessed through the broadband dial-up connection after creating a broadband dial-up connection.

2. If the computer is connected to the router with a network cable, first check whether the port of the network cable and the network card and the port connected to the LAN of the router are in good contact, whether the network cable is normal, and if there is a problem, please replace the network cable. If you can connect normally, the LAN light will also be on, and there is no problem with the connection, please check whether the router has DHCP service turned on and whether the WAN port is connected to the Internet. If there is a problem, you can restart the router to reconfigure it.

Still doesn't work, try replacing the router.

3. If there is a problem with the network, you can press the win+x key combination, select the command prompt (administrator), enter netsh winsock reset in the prompt box, and click OK. Wait for the network reset to complete, restart the computer, and resume normal use.