How can the computer be like this, is there something wrong with the system?

It could be, but it could also be done by a virus.

System errors when the computer is turned on can be handled in the following ways:

1. Restart the computer: restart the computer normally in the current state, or press the host restart button to restart the computer, if there is no longer an error prompt and can enter the system operation normally, it means that the last abnormal is only an occasional program or system running error, it does not matter.

2. Fix the error: If you can't enter the system normally frequently, press F8 immediately after booting to see if you can enter the safe mode or configure the correct mode for the last time, if you can, the registry will be automatically repaired after entering, and recall what operations were done when the first few abnormal phenomena occurred, and according to the suspicion that a certain application software caused the problem, uninstall it, and then exit normally, and then restart it should be able to enter the normal mode.

3. Reinstall the system: If the above operations are invalid, you need to reinstall the system.

There are many complex reasons for system errors when the computer is turned on, it may be a corrupted system file, it may be a virus infection, it may be a conflict of self-starting programs in the background or multiple security software installations causing the system to freeze death, it may also be a poor memory contact or compatibility problem, it may also be a fragmented or bad sector of the hard disk, or it may be a failure of other hardware such as the motherboard.

Handling suggestions: according to the principle of easy to difficult, first software and then hardware, it is recommended to reinstall the system, which is the easiest and fastest way to finish, if the reinstallation system is successful, it can also rule out the possibility of hardware problems.

At this time, you can use "Chang Shen" on other computersPartition Wizard Assistant"Make a boot disk, then use the boot disk to boot this computer to PE, and reinstall the system in PE.

1. If the error occurs when setting up a new computer, or after restoring the computer, please select "Open Startup Repair (Recommended)" from the error screen to let Windows repair its files. If the error persists after the repair, perform a system recovery to restore the computer to its original configuration. Once the recovery is over, make sure that you are done setting up your Windows and that you are able to see all the icons and sidebars on your Windows desktop before shutting down your PC.

Method. 2. Delete the recently added hardware.

1. Turn off the computer, and then unplug the power cord.

2. Disconnect all unnecessary peripherals.

printers, scanners, cameras, zip drives, cables, network cables, and other devices). Only the rat cavity grinding label, keyboard, and monitor connections are retained.

3. Press and hold the "Power" button on the front of the computer. Release after five seconds.

4. Plug the power cord back in.

5. Start the computer.

6. The monitor displays Li Dou's information again.

7. If the error reappears, skip to the next step.

8. If the computer successfully enters the Windows desktop instead of restarting the error message, reconnect a device and wait for Windows to recognize the device.

9. Connect one device at a time, and restart the computer after each connection until you find the device that is causing the error. Do not use devices that are known to cause errors.

What system error occurs in the computer and how to solve it, 1. Restart the computer: restart the computer normally in the current state, or press the host restart key to restart the computer, if there is no longer an error prompt and can enter the system operation normally, it means that the last abnormal is only an occasional program or system running error, it does not matter. 2. Fix bugs:

If you can't enter the system normally frequently, press F8 immediately after booting to see if you can enter the safe mode or configure the correct mode for the last time, if so, the registry will be automatically repaired after entering, and recall what you did when the first few abnormal phenomena occurred, and according to the suspicion that a certain application software caused the problem, uninstall it, and then exit normally, and then restart it should be able to enter the normal mode. 3. Reinstall the system: If the above operations are invalid, the tease ant needs to reinstall the system.

There are many complex reasons for system errors when the computer is turned on, it may be a corrupted system file, a virus infection, a conflict in the background auto-start program or multiple security software installations causing the system to freeze death, it may also be a poor memory contact or compatibility problem, it may also be a fragmented or bad sector of the hard disk, or it may be a failure of other hardware such as the motherboard. Handling suggestions: according to the principle of easy to difficult, software first and then hardware to check one by one, it is recommended to reinstall the system, which is the easiest and fastest way, if the reinstallation of the system is successful, you can also eliminate the possibility of hardware problems.

I hope I can help you! If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, your support is also the driving force for my progress, and finally I wish you good health and a happy mood!