Xiaomi Mi 10wifi is unstable, and Xiaomi Mi 10wifi is old and disconnected

Mobile phone wifi is unstable, on the one hand, it has something to do with the mobile phone, on the other hand, it has to do with yours, the wifi signal is also related, if the wifi signal is not very good, not very stable, it may also lead to unstable reception.

I can tell you for sure that it is Xiaomi mobile phone garbage, I Motorola Lenovo Huawei are fine, as far as Xiaomi appears wifi instability, and even disconnect and do not connect you, it has nothing to do with the wifi environment, and it is not a few people who have this kind of problem, it can be said that there are too many people with Xiaomi mobile phones. (A search for a whole bunch of questions).

This situation may have something to do with your wireless router.

Of course, it is not excluded that it has something to do with your mobile phone chip.

If the factory yield rate of your mobile phone wifi chip is not good, there may also be problems.

Of course, this situation needs to be inspected after after-sales before it can be replaced or repaired.

This is mainly a problem with the performance of the phone, you can turn it off and then turn it on, so it will be better.

In the case of Xiaomi mobile phones, the wireless of this version is unstable, which should be caused by the signal source in it, or the quality of the mobile phone is too poor.

There are many reasons for instability, which should be the instability of the network, or the distance is too far, let's change the angle and change the geographical location.

I just checked for you, this can be adjusted in the wifi settings.

This one has a lot to do with your wifi signal transmitter, that is, the router, and has little to do with the mobile phone.

If the wifi is unstable, we can see if the setting of the connection wifi is better.

If we can, we can forget the Wi-Fi and reconnect it.

Maybe your own network is unstable.

Xiaomi Mi 4wifi is unstable, I have also encountered such a situation, there is no way to solve it.

WiFi automatic disconnection may be caused by low signal band penetration, and the solution is as follows.

1. Unlock Xiaomi Mi 10 first

On your phone, tap on MIUI12 to open Settings.

2. Open the phone settings interface, find [WLAN] and tap to open.

3. Next, the town laughs at the wireless network.

find and click to open Advanced Settings in it.

4. In this way, you can see [WLAN Band] in the advanced settings, click to open the option.

5. Finally, there are three options in the WLAN frequency band selection, the default is automatic, select [Use Frequency Band Only], so that strengthening the penetration of the wireless network will alleviate the situation of dropping calls.

If it is still the same after the initial settings are restored, but it is normal for other devices to connect to this wifi, then considering that there is a problem with the WLAN hardware of the mobile phone, it is recommended to contact the official after-sales service center and the engineer will help check and deal with it.

Xiaomi mobile phone uses wifi to frequently drop the network, specific solutions.

1. Tap the Wi-Fi menu item on the settings page of the Xiaomi phone that opens.

2. Open the Wi-Fi advanced settings page of your Xiaomi phone and find the WLAN band setting here.

3. In the pop-up settings menu, we select the menu item that only uses the Hertz band.

4. Return to the WLAN advanced settings page, you can see that the WLAN band setting has been set now, and then try it!

Check whether there is a problem with the router, restart it or restore the factory settings, and try to connect to the wifi with your mobile phone to see if there is a disconnection problem.

Sometimes the wifi keeps disconnecting, not necessarily because of the phone, but also because of the problem with your router. The problem of networking is particularly complex.

Mobile phones have become an indispensable thing in our daily life, but there will also be a phenomenon of disconnectionLet's talk about how to solve the current interruption of Xiaomi Mi 10.

1. First unlock the Mi 10, find the icon of "Settings" if it is cut off, and click it to enter the Mi 10 settings page.

2. Open the settings page of your Xiaomi Mi 10 phone and click the "Wi-Fi" menu item on the page.

3. Next, find the "Advanced Settings" menu item in the Wi-Fi settings page that opens.

4. Then in the Wi-Fi Advanced Settings page that opens, click on the "Wi-Fi Band" menu item.

5. At this time, the WLAN band setting menu will pop up, and here you can choose to use only the frequency band menu item, so that there will be no more interruptions.

Fifteen and one Buddha a solution to the broken stream, the solution to the broken stream, Xiaomi is the after-sales solution, this is Xiaomi.

If it is disconnected, find the "Settings" icon, and click it to enter the Xiaomi Mi 10 settings page.

2 6 Open the settings page of your Xiaomi Mi 10 phone and tap the "WLAN" menu item in the page.

3 6 Next, find the "Advanced Settings" menu item in the WLAN settings page that opens.

4 6 In the WLAN Advanced Settings page that opens, we click on the "WLAN Band" menu item.

5 6 The WLAN Band Settings menu will pop up, select the Use Only Band menu item here.

6 6 Press the back button to see that the current WLAN frequency band has been set to use only the frequency band, so that there will be no more disconnection.

This is really unsolvable, I think it's a hardware problem, I see a lot of people even if they update the system, they can only alleviate it, and they can't **, so buying a mobile phone also depends on luck, and the mobile phone I bought has not been interrupted, hahaha.

This can be said to be a small vulnerability in the system, and it can only wait for a patch or update of the system to solve it.

There is no good way to solve this, so we can only wait for the system update to solve it.

Xiaomi Mi 11wifi drops frequently? Some Xiaomi Mi 11 mobile phone users will have a connection to wifi but frequent drops, and sometimes they will be connected to the network, but it is very stuck. What should I do if Xiaomi 11wifi drops frequently?

The following brings you the solution to the Xiaomi 11wifi network card, I hope it will help you.

What should I do if Xiaomi 11wifi drops frequently?

1. Reason: WiFi disconnection, disconnection, etc. are the problems of the mobile phone, not the signal problem, the default in the mobile phone is a high-frequency receiver, and the router we generally use is the frequency to receive the signal, so it will lead to poor reception signal. Another reason is the problem of the router, the router at home generally supports the IPv4 protocol, but now the new version supports IPv6, and also supports IPv4 but is unstable, so there will be a wifi disconnection problem.

2. Solution:

One is to change the reception method of the mobile phone, in the mobile phone's [Settings] - My Devices - All Parameters - Developer Options] - Use the old DHCP client]. The specific operation steps may be different depending on the mobile phone version, but remember to "use the old version of DHCP". Because the old version of DHCP happens to be adapted to the IPv4 protocol, the signal will become full immediately.

The other is to change the dual-band router, which can connect you to two wifi at the same time, if it is an old mobile phone, it can only be connected to the frequency, if your mobile phone is **, you can receive the frequency and 5G frequency at the same time, obviously, the 5G frequency must be faster.

The above is what to do if the Xiaomi 11wifi frequently drops the line? The Xiaomi Mi 11wifi network card has been solved.

Frequent wifi drops are recommended for you:

Ignore (do not save) the network and reconnect.

Turn off the ** server settings of wifi;

If it is a corporate network, we recommend that you contact the company NMS for troubleshooting or assign a static IP address to solve the problem.

It is recommended that you update the router firmware to try;

After disabling or uninstalling the third-party optimization software or backing up the data, clear all the data and try again;

If none of the above methods can solve the problem, it is recommended to back up the mobile phone data to the repair point for testing.

If your mobile phone or tablet cannot connect to WiFi, it is recommended that you:

1. The default mobile phone is DHCP Internet mode, make sure that the router is enabled DHCP service;

2. It is recommended to modify the name of wifi to English;

3. If other devices can be connected to WiFi, delete the wireless reconnection or uninstall the third-party security software and restart the device. If all devices cannot connect, reset the router;

4.Enter the router management background to confirm whether the blacklist or whitelist function (MAC address filtering) is enabled, and turn off Bu Hui's function or set the release for the device (the default management address of the Xiaomi router:. ）

5. Restore factory settings after backing up data or reconnect after upgrading to the latest system version.

6. If the above methods are ineffective, it is recommended to carry out testing and treatment.

1. Because of signal interference. Most of the wireless routers on the market today are frequency-based, and now more and more people around you are using wireless 1653 routers, which causes interference between each other.

2. First check the network environment. Check if the network signal is too poor or unstable. When someone occupies a large amount of bandwidth, the mobile phone is generally the first to be affected, it may be that there is a problem with the Wi-Fi function of the mobile phone, you can try to turn off and then turn on the Wi-Fi function of the mobile phone.

3. Under some devices, the channel used by the wireless router is strict, and the connection may be very slow if the channel is not commonly used, or even disconnected as soon as it is connected, at this time we should change the wireless channel of the router to 6 or 9 and other common channels.

4. Open the phone's "Settings"--More"--Mobile Network"--"The name of the access point"；Once you're in, click on the "Menu Key" at the bottom of the screen - and click on "New APN"; Click on "Name" -- set to:"cmtds"--- then change "APN" to "cmtds"; Then click Save.