How to solve the problem of double zipper clothes on both sides of the zipper teeth misalignment, on

1. Pull the zipper to the head.

Pull the zipper to either end of the zipper so that all the teeth are exposed. Try to expose all the teeth so that the zipper can be pulled back smoothly.

2. Rub the tooth with a drawing pen.

Rub the tip of the drawing pencil along the teeth of the zipper so that a layer of pencil dust is left on the teeth.

Pay attention to the zipper problem, as this is where the roughest and most lubricated areas are needed.

However, be sure to run the entire zipper through with a drawing pen so that the entire zipper can be lubricated.

If you get caught in your clothes, try to apply more pencil ends under and around the clipped area. You can also apply a little pencil dust to the fabric you clip to make it easier to pull out. The pencil is now the lubricant that can be easily controlled.

3. Pull the zipper back and forth.

Slowly pull the zipper back and forth over the lubricated zipper. If there's even the slightest resistance, stop and add some more pencil ends and continue to pull until it can be pulled from one end to the other. Don't be too fast, as this may create other problems.

If it is stuck on the fabric, you need to slowly "swing" the zipper to gently pull it out.

4. If the end of the pencil is not good, change to a strong lubricant.

Other lubricants are soap, candle wax, glass cleaner and lip balm, which are applied to the zipper in the same way.

The zipper teeth on both sides of the double-zipper clothes are misaligned and become long and short and cannot be opened, so pull them back first, and then pull them back again.

1. Find a white wax, even a candle, or the yellow or white wax of the pill, and apply it to the teeth of the zipper, and it will become easy to pull.

2. The oil of the sewing machine is relatively transparent and clean, and it can be dripped on the zipper, but don't do so much, otherwise it will stay. If you don't have sewing oil, you can make do with peanut oil and vegetable oil, and it is not recommended that the oil is dirty.

You can remove the zipper and realign it. If you can't do it yourself, you can go to a special store or a professional to help you.

Rather, it is said that even the same person can have different outlooks on life, and some just don't want to cause adverse effects on others. In a word, there is nothing right or wrong in many cases, provoking greed and tickling prostitutes.

Hello, try the following methods to see if it can help you, 1. Insert a ballpoint pen into the center of the separated zipper, and then open the zipper through a small opening, so that the zipper can be opened. You still have to be patient when pulling the zipper, especially in the case of misalignment, you can't pull too hard, and it will be easy to break the zipper. 2. Pull the zipper puller to the bottom of the garment so that it can be untied.

In this process, it is very likely that you will not be able to pull it open, so you still have to be a little patient and not push too hard. You can also try to take out the zipper of one slider, and then pull the second zipper head out forcefully. 3. The zipper should be maintained regularly, if there is a situation that cannot be pulled, then you can drip some lubricating oil on the zipper, so that the next time you pull it, it will be very good.

If you have candles at home, you can also apply some on the zipper and slowly move it back little by little, so that the misalignment can be restored. 4. Spray some lubricating spray inside the zipper, and then move the zipper head several times to slide it loose. Zipper hall Zheng Chun bag and the like, or don't overfill.

1.Separate the zippers on both sides and gently pull the zipper pulls on both sides with your hands, carefully checking for misalignment of the teeth. 2.

If you find that the misalignment is found, use a pointed needle to separate the misaligned teeth, and then gently pull the teeth with your fingers to make the teeth butt, and then pull the zipper of the source moving object to open. 3.If the zipper zipper is broken, slide it to cut it with scissors and reinstall it.