Wood veneer construction process and steps 30

The construction process of wood veneer: elastic line, moisture-proof layer installation, keel installation, base plate installation, veneer installation.

1.If the manufacturer enters the site early, it is necessary to send out the on-site base size drawing to the decoration personnel. Tell the on-site renovation staff what kind of grassroots they need to do.

2.Measure the size of the base layer on site, and draw wood veneer drawings according to the interior design drawings; At the same time, check whether the on-site grassroots meets the requirements and see if the grassroots needs to be modified? The skeleton material selected for the wood base must be dried, and the nine plywood is installed on the keel as the base layer, and the installation is flat and firm without warping.

If there is a depression or protrusion on the surface that needs to be corrected, the dust, glue particles, and nail heads left on the bonding layer should be completely removed or flattened.

3.Tell the bottom first, first to the on-site decoration construction staff to see if there is any grassroots aspect that needs to be adjusted or wood veneer practices that need to be adjusted.

4.There is no problem with on-site communication, after signing, the designer draws the wood veneer production drawings (need to consider the on-site transportation conditions and the convenience of later installation), and the wood veneer list is handed over to the factory to place an order.

5.The factory formulates a production plan according to the wood veneer production drawings and lists.

and delivery plan, and complete the production on time and with quality.

6.Packaging: First of all, the wood veneer is covered with transparent film protection after the production is completed, and the label is affixed on it according to the drawing number, and the moisture-proof film and kraft paper are used.

Packing, (do some reinforcement work of wood veneer as needed) and then do carton and wooden box packing according to the transportation conditions. Properly label the outside of the package.

1. The pavement scheme should be constant.

For each stadium, or theater stage, what materials to pave, and how to pave, are determined according to the actual parameters of the sports venue and the investment budget. Therefore, once the sports wood floor paving scheme is decided, it should not be changed easily.

Frequent changes to the design and construction plan of sports wood flooring will cause additional investment and even affect the construction period. Therefore, in the design of sports wood floor paving scheme, it is necessary to communicate and coordinate with sports wood floor manufacturers, clarify standards, and avoid unnecessary problems.

2. Customized products should be in advance.

The overall structure of the sports wood floor is basically all solid wood structure, and the moisture content of the floor will be done according to the climatic conditions and moisture content changes of the installation project site during production, which is generally about 6%-14% on average. Before ordering sports wood flooring, it is important to allow sufficient time for production in order to ensure the quality of the flooring.

3. Avoid cross construction.

Cross construction, that is, the paving of sports wood floors, is carried out at the same time as other construction projects of stadiums and conflicts with each other. The sports wood floor paving project should avoid cross construction, so as to affect the smooth progress of the sports wood floor pavement, or the construction of other stadium construction projects destroys the paved sports wood floor floor.

4. Supervision and acceptance should be involved.

Although it is said that the installation project of sports wood flooring is operated by the pavement engineer of the sports wood floor manufacturer. However, the stadium contractor and Party A should also arrange a special person to be responsible for tracking and supervision, and solve the problems in the installation of sports wood flooring in a timely manner.

Summary. Wood veneer:

With artificial wood board as the base layer, veneer (also known as thin wood, veneer) is selected as the decorative panel according to the design requirements, and various decorative panels are made by factory processing.

Wood veneer construction technology and steps.

Wood veneer: with artificial wood board as the base layer, veneer (also known as thin wood, veneer) is selected as the decorative panel according to the design requirements, and various decorative panels are made by factory processing.

Wood veneer installation method: paste method or dry hanging method:

Dry hanging method construction is an installation method that adopts pendants (positive and negative pendants) to fix wood veneer, which is the most common wood veneer installation method.

The pasting method is generally suitable for thin wood veneers that need to be covered with full flooring. Liquid nails (nail-free glue) are usually used to fix the wood veneer to the base panel.

Explanation of the whole process of wood veneer installation process and the prevention of common quality problems.

Paste method. Material: Liquid nails.

Features: easy to operate, low installation labor cost, high requirements for the base layer.

Explanation of the whole process of wood veneer installation process and the prevention of common quality problems.

Dry hanging method (1).

Material: wooden pendant.

Dry hanging method (2).

Material: metal pendant.

Features: Good stability and durability in humid environment.

Close connection. The advantage of close joint treatment is that it has a strong sense of wholeness, no seams in the middle, and neater pattern buttling.

The next suite should also be veneered with wood veneer! From design to construction, the all-round strategy is too cost-effective.

However, the close connection treatment has relatively high technical requirements for the installation master.

The next suite should also be veneered with wood veneer! From design to construction, the all-round strategy is too cost-effective.

2. Seams. The gap spacing of the slit is generally between 3mm and 5mm, and the gap can be ...... with glass glue, metal strips, and edge veneerNatural filling.

The next suite should also be veneered with wood veneer! From design to construction, the all-round strategy is too cost-effective.

Note: The side veneer should not be too thick, otherwise the convex junction with the wood veneer will be too obvious.

The next suite should also be veneered with wood veneer! From design to construction, the all-round strategy is too cost-effective.

3. Splicing. The wood veneer can be combined with other materials.

1 Springline. According to the design requirements, the highest position line and the lowest position line pop up on the wall, as well as the grid line of the wooden keel. Normally, the grid of the wooden keel is 300 or 400 mm long.

2 Assembling the wooden keel.

The wooden keel is usually made of pine with a cross-section of 25 30mm, and the connection between the keels is best connected by grooves. Generally, for the wall with a small area, it can be put together into a wooden dragon skeleton at one time, and then fixed on the wall. For the wall with a large area, the wooden keel skeleton can be installed in pieces to fix and polish the brigade.

In addition, in the actual construction, the wooden keel can also be directly assembled and fixed on the wall according to the position of the elastic line.

3. Brush fireproof paint.

In interior decoration, the walls of the wooden structure need to be fireproofed, and the fireproof coating should be applied 2 or 3 times on the wooden skeleton and the back of the wood plywood.

4 Fixing the wooden dragon skeleton.

1) Check the flatness and verticality of the wall, for the wall flatness error within 10mm, can be plastered and trimmed, for the wall flatness error of 10mm, usually no longer trim the wall, the way to add a wooden pad to adjust, in order to ensure the flatness and verticality of the wooden dragon skeleton.

2) Use a percussion drill to drill holes at the intersection of the grid lines, with a hole depth of 50 60mm, and drive into the wooden wedge (if the wall is susceptible to moisture, the wooden wedge can be brushed with tung oil treatment, and driven into the hole after drying). Lean the wooden dragon skeleton against the wall, check the verticality and flatness, and then nail it with iron nails.

5. Install the wooden blind stool plywood.

1) Select the wood plywood, and plane out a 45° chamfer on the four sides of the front of the selected wood plywood, and the width of the chamfer is about 3mm.

2) There are two ways to fix the wooden plywood: one is fixed with a nail gun, and the other is fixed with a small round head iron nail. When fixed with a small round head iron nail, the nail head must be driven into the plate about 1 mm. It is required that the nails are evenly clothed, and the spacing between the nails is about 100mm.

6 Install the baseboard buttons.

For skirting boards made of solid wood, they can be fixed directly to the plywood wall with all-purpose glue or iron nails. For the use of solid wood boards and wooden plywood to make baseboards, iron nails are generally used to fix the wooden keel on the wall.

7 Finishes and closures.

On the base surface of wood plywood, the types of finishes that can be carried out are: paint finishes, paint finishes, pasting finishes, glass mirrors, stainless steel plate finishes, plastic veneer finishes and various forms of upholstery finishes. The closure beads of the veneer are usually made of wood or stainless steel.

First, the construction technology of wood veneer.

1. Find a position and mark a line.

Before the installation of wooden parapet walls and wooden bobbins, the elevation, plane position, and vertical size should be found according to the requirements of the design drawing.

2. Nuclear embedded parts and holes.

Check whether the embedded parts and wooden bricks meet the design and installation requirements, and check whether the spacing, size and position of the arrangement meet the requirements of the nailed keel; Measure whether the position and size of doors, windows and other openings are square and vertical, and whether they are consistent with the design requirements.

3. Paint moisture-proof and anti-corrosion coatings.

The wooden parapet designed with moisture-proof and anti-corrosion requirements should be pressed and paved with moisture-proof membrane when nailing the keel, and the construction of moisture-proof and anti-corrosion should be carried out before nailing the keel.

4. Preparation and installation of keel.

5. Install the finished wood veneer.

Two. Stainless steel plate construction process.

Elastic line, scratch the hanging mark as the main line, hanging bar installation, keel installation, concealed acceptance, wooden base plate installation, stainless steel surface plate installation, acceptance.

Wood is one of the most common decorative materials in people's lives. Wood has many uses. How to do the wood wall decoration process?

Today, it will be for everyone, and friends who want to know may want to take a look with me! First of all, how to do the wood board wall decoration process The wood board wall decoration worker holds the forest art 1, and uses the wooden board to make the TV background wall. You can decorate the background wall of your TV with wooden panels.

The installation of the back wall of the TV should be consistent with the general style of the house. Only then does it not look strange. Due to its natural texture, the planks can be used as a video wall backdrop to refine a strong pastoral style.

Wood wall decoration process 2, use wood to make woodcarving and decorative wall. Woodcuts can be made of wood, painted or engraved on wooden panels, are free, and the final product is unique, adding color to the wall and making the wall more exclusive wood painting. 3. Make lattice shelves with wooden planks You can use a piece of wood to form a frame lattice on the surface of the wall by means of installing the frame, so that you can not only solve the storage of items, but also consider the surface of the decorative wall.

As a rule, a fireplace is a representative of European home decoration, so the appearance of a wooden fireplace can make the style of the entire home look very elegant. 5. Decorate the walls with parallel wood. Wood can be used to decorate the walls in a parallel arrangement, and since the parallel rows of wood and walls are integrated, it can also be used to place small objects, thus increasing the space of the product.

At the same time, it also has a simple decorative wall effect, and the modern style is very popular among young people. Classification of planks 1According to the classification of materials, it can be divided into two categories:

Solid wood planks and planks. Currently, in addition to using solid wood panels for flooring and door leaves, the boards we use are usually artificially processed. 2. According to the classification of molding, it can be divided into:

Solid wood board, plywood, fiberboard, decorative board, fireproof board, etc. The above is to share with you how to do the wood board wall decoration process.

The construction steps of wood veneer wall panels are as follows:1Prepare tools and materials:

Wood veneer wall panels, woodworking glue, nails, hammers, electric drills, carpentry saws, rulers, pencils, corner lines, etc. 2.Clean the walls:

Clean the wall to make sure it is flat, dry, free of dust and oil. 3.Measure the size of the wall:

Use a ruler and pencil to mark the location and size of the wood veneer wall panels on the wall. 4.Cut wood veneer wall panels:

Use a woodworking saw to cut the wood veneer wall panels to the appropriate size according to the size requirements. 5.Apply woodworking glue:

Apply woodworking glue evenly on the back of the wood veneer wall panel to ensure that the glue is evenly applied. 6.Installation of wood veneer wall panels:

Stick the wood veneer wall panel coated with wood glue on the wall according to the marked position, and gently tap it with a hammer to ensure that the wood veneer wall panel fits tightly against the wall. 7.Fixed wood veneer wall panels:

Use nails to fix the wood veneer wall panels to the wall to ensure that the nails are not exposed. 8.Installing the Corner Lines:

After the installation of the Fool Heng Wood Veneer Wall Panel, clean the glue and dust on the surface of the wall and wood veneer wall panel to ensure that the wall is clean and beautiful. Notes:1

Before construction, make sure that the wall is flat, dry, free of dust and oil. 2.When installing wood veneer wall panels, make sure that the wood veneer wall panels fit snugly against the wall to avoid gaps.

3.When fixing wood veneer wall panels, make sure that the nails do not expose the surface to avoid affecting the aesthetics. 4.

When installing the corner line, make sure that the corner line fits tightly with the wood veneer wall panel to avoid gaps.

I believe we all know that wood veneer is a material that is currently used more frequently. In order to meet the various needs of decorators, the types of wood veneer panels are constantly increasing. So, how to install wood veneer?

What are the types of wood veneer? These two questions have bothered many people, so let's explore the answers together!

1. How to install wood veneer?

First, prepare the metal pendant, and then use the metal pendant directly to hang the wood veneer on the steel frame, and generally do not need to be glued and pasted. The principle is to establish a stress point on the main organization, and then use a metal pendant to stabilize the panel in the equipment, so that a wooden decorative wall is formed.

2. What are the types of wood veneer?

1. Lift wood next to pomelo.

It is understood that the teak panel is a very high-grade wood. Because the teak panel has a beautiful appearance, clear lines, and the color generally does not change, the decorative effect is very good. In addition, teak panels have become an essential material for the decoration of high-end areas such as villas.

2. Ebony. The surface gloss of the ebony panel is very bright, and the wood is very delicate, so it has become a very precious wood. It is understood that the ebony panel can present a generous and natural effect.

3. Walnut.

Walnut originated in Canada and the United States. Because of its deep color and calm decorative effect, walnut has become the material of choice for high-end furniture.

4. White oak. Although the color of the white finch hand oak is relatively elegant, it can present a natural and simple feeling, so it has won the favor of countless decorators.

Summary: The above has introduced to you how to install wood veneer and what types of wood veneer are related to the content, I hope to give you some small help. If you want to know more about wood veneer-related content, you can continue to **** Qijia Home, and you will definitely show more content related to this later.