-
The connection steps are as follows:
1. Click Start to open Settings.
2. Select the Device option.
3. Set the Bluetooth switch to the ON position.
<>5, tap the Bluetooth device you want to connect to.
6. Verify the PIN code, click Connect, Pair.
Pairing is successful. <>
-
Notebooks are all with Bluetooth,Win10It's easier to turn it on.,Click on the notification at the bottom bar to see the switch.。
With desktops, you'll need to have a receiver, and that's not expensive.
-
The detailed operation steps are as follows:
1. Find the control panel on the computer start page, as shown in the figure below
2. Click Network & Internet in the control panel, as shown in the figure below
3. After entering the new page, click on Network and Sharing Center, as shown in the figure below
4. Then select the option to change the device, as shown in the following figure:
5. Select Show Bluetooth device in Device Change, as shown in the following figure
6. Wait until the desktop can see the Bluetooth icon, which means that the Bluetooth function of the computer has been turned on, as shown in the figure below
Finally, add devices (connect to mobile phones) as needed, and you can share the real Bluetooth between the mobile phone and the computer.
-
The connection steps are as follows:
1. Click Start to open Settings.
2. Select the Device option.
3. Set the Bluetooth switch to the ON position.
<>5, tap the Bluetooth device you want to connect to.
6. Verify the PIN code, click Connect, Pair.
Pairing is successful.
-
Press the shortcut key win+r, and then enter to open the system service interface.
Find the Bluetooth Support Service in the list of services on the left, which translates to Bluetooth Support Service.
Double-click to open this service, select the start button, and change it to automatic start in the drop-down list, so that when a mobile phone uses Bluetooth, you can see the Bluetooth of the computer and connect If you want to turn off the Bluetooth function, directly with the above method, choose to turn off. Or some computers' function keys can also turn off Bluetooth directly.
-
The connection steps are as follows:
1. Click Start to open Settings.
2. Select the Device option.
3. Set the Bluetooth switch to the ON position.
<>5, tap the Bluetooth device you want to connect to.
6. Verify the PIN code, click Connect, Pair. Pairing is successful.
-
Click Start in the lower left corner of your computer, find Computer Settings (gear icon) and select Computer & Settings
Then tap Bluetooth
You can see the Bluetooth settings switch.
Generally, after Bluetooth is turned on, a small Bluetooth icon will appear on the taskbar, and the above is the operation of turning on the computer's Bluetooth.
-
You can turn on the Bluetooth function of your computer through the following methods:
Use shortcuts: Most computers have a Bluetooth shortcut, which is usually a Bluetooth icon. You can press this shortcut key on your computer's keyboard to turn the Bluetooth function on or off.
Turn on through settings: You can turn on the Bluetooth function through the settings menu of your computer. In the Windows operating system, you can tap the Start menu, select Settings, then tap Devices and Bluetooth & other devices, where you can turn Bluetooth on or off.
In the Mac operating system, you can tap the Apple icon at the top of the screen, select System Preferences, and then tap Bluetooth, where you can turn the Bluetooth feature on or off.
Use the taskbar icon: In the Windows operating system, you can find the Bluetooth icon in the taskbar, and tap it to turn Bluetooth on or off.
-
The connection steps are as follows:
1. Click Start to open Settings.
2. Select the Device option.
3. Set the Bluetooth switch to the ON position.
<>5, tap the Bluetooth device you want to connect to.
6. Verify the PIN code, click Connect, Pair.
Pairing is successful.
-
How do I turn on my computer's Bluetooth function? I don't know much about this, so I suggest you go to the people to know and check it.
Here's how to contact your laptop to enable the wireless switch: >>>More
In the Start - Settings - Control Panels - Region and Language options. >>>More
1. Turn on the Bluetooth of the computer, if your computer has a manual Bluetooth switch, then turn it on manually, and it is generally automatically started when the computer is turned on. >>>More
1. First we need to turn on the computer.
2. Then we need to click on the local disk C, which is very important. >>>More
3. Copy it to your Mac with a USB flash drive.
4. Double-click to open on Mac"microsoft office ", follow the steps to install step by step. >>>More