Nubia Z11 brick saving method What should I do if Nubia Z11 can t turn on

Hello, you can try:

1.Put the adapted flashing package into the SD card, press and hold the power button + volume down button on the mobile phone, recovery mode appears, press the volume button to select the two options at the beginning of WIPE, the power button is OK, continue to select the statement starting with "yes" in the pop-up interface, the power button is OK (that is, Shuangqing), then select "SDCARD", find the flash package, press the power button to confirm, and then flash in.

2.Link the computer, the computer**"Line Brush Treasure" or other line brush software, follow the prompts in the software to operate, select the favorite flash package**, and then it will automatically parse the flash package, after the analysis will prompt how to link the computer, then look at the displayed tutorial.

Possible causes:

1. The installed phone case does not match the mobile phone or is not installed properly, resulting in the power button being stuck or squeezed, triggering the automatic restart mechanism of the mobile phone by pressing and holding the power button.

2. If the temperature is too low or too high, the low temperature or high temperature protection function of the mobile phone will be triggered, resulting in automatic restart.

3. It may be caused by too many cache files on the mobile phone, resulting in the automatic restart of the mobile phone due to excessive load.

4. It may be that the file system in the SD card is abnormal, and the phone automatically restarts for no reason.

5. Confirm whether the timer on/off function is turned on.

Solution: 1) If the phone is normal after removing the protective case, it is recommended to replace the official standard protective case of the mobile phone.

2) It is recommended to keep the phone in the ideal temperature (0 to 35) as much as possible, which can avoid this problem and effectively improve the battery life.

3) The cache file will be automatically cleared after the phone is restarted, please use it normally after the phone is restarted. We recommend that you clean up background apps in a timely manner.

4) If the phone uses an SD card, it is recommended to take out the SD card after turning it off and try again.

Open the shell, unplug the battery, replug it, and you're done.

Press and hold the power button for 10 seconds to force power off.

1. Restoring factory settings or double clear data can solve such problems

1) Press and hold the power button and volume + button at the same time when the phone is off.

2) Release the button when the screen lights up and wait for the recovery mode to enter.

3) Use the Volume+ and Volume—keys to adjust the bright bar to "Wipe Data Factory Reset", i.e. "Clear Data Restore Factory Reset", and press the Power button to confirm.

4) Use the Volume+ and Volume—keys to adjust the light bar to "yes, delete all user data", and press the power button to confirm.

5) Wait for a while until the screen appears, select "Reboot System Now" to reboot your phone, and press the power button to confirm.

6) Wait for your phone to reboot into the system.

2. Brushing the machine can completely solve the problem;

3. If the above methods are ineffective, it is recommended to send them to the after-sales service.

1.Factory reset or double clear data can solve this problem:

1) Press and hold the power button and volume + button at the same time when the phone is off.

2) Release the button when the screen lights up and wait for the recovery mode to enter.

3) Use the Volume+ and Volume—keys to adjust the bright bar to "Wipe Data Factory Reset", i.e. "Clear Data Restore Factory Reset", and press the Power button to confirm.

4) Use the Volume+ and Volume—keys to adjust the light bar to "yes, delete all user data", and press the power button to confirm.

5) Wait for a while until the screen appears, select "Reboot System Now" to reboot your phone, and press the power button to confirm.

6) Wait for your phone to reboot into the system.

2.Flashing can completely solve the problem;

3.If none of the above methods work, it is recommended to send it to the after-sales service.

Press and hold the side power button for 12 seconds until the phone screen goes black and it turns back on.

Here's how to turn it on:

Press and hold the power button for 15 seconds, and the system will automatically turn on.

Or get the firmware ROM from its official **, here you need the upgraded firmware ROM version that matches the Nubia Z11. Or directly in the "Odd Rabbit ROM Market" ** Nubia Z11 phone matching ROM firmware package.

After successfully obtaining the Nubia Z11 upgrade firmware ROM package, change its name to "file name", and at the same time connect the phone to the computer, and copy this file to the root directory of the SD card. <>

Use the volume [Volume Up] and [Volume Down key] to move the cursor to the "Wipe Data Factory Reset" and "Wipe Cache Partition" rows, respectively, and press the [Power Key] to complete the OK operation.

This completes the entire phone recovery and boot operation.

We recommend that you try it by following these steps:

When the device is fully charged, after backing up data, press and hold the [Power Button] and [Volume +] buttons for 10 seconds with the device off (off).

After entering recovery mode, move the cursor with [Volume+], Volume-].

Operate 2-wipes again and select Wipe Data Factory Reset >yes, home] to confirm.

Select wipe cache partition > yes , home] to confirm.

Select reboot system now > yes , home] to confirm.

After doing so, restart and you're done.

Nubia Z11 Mini is a dual-body metal curved bezel design, inch 1K screen, Snapdragon 617 processor, 3GB RAM+64GB ROM, 8 million + 16 million cameras, sapphire lenses, and supports PDAF phase focus, supports 3D noise reduction, handheld image stabilization, 2800mAh battery, supports fingerprint recognition function, dual-band Wi-Fi, Bluetooth, DTS sound effects, 7 modes and 18 bands full Netcom, 4G+, Volte.

The phone won't turn on the solution:

Check whether the battery is charged first, charge the phone with a charger for a while, and then try to turn it on.

Whether it can enter recovery. How to enter recovery: In the shutdown state, first press and hold the "volume up button" and then press and hold the "shutdown button", and let go when the boot screen appears, you can enter recovery.

If you can enter Recovery, switch the system under Recovery and back up important data, if it can't be successful, you need to erase all data (contacts, text messages, phone apps, etc. will disappear).

Whether it can enter fastboot. How to enter fastboot: In the shutdown state, first press and hold the "meter key", then press and hold the "volume down button", and then press and hold the "shutdown button", and let go when the boot screen appears, you can enter fastboot.

If this is still the case, it can only be sent for after-sales testing, and the hardware of the mobile phone has failed.

There may be several reasons why the phone won't turn on:

It is not ruled out that it is caused by battery failure.

The phone system hardware is damaged.

Mistakenly deleting core components of the system.

After charging for half an hour, press and hold the power button for 15 seconds to force a restart attempt, if not, it is recommended to enter REC mode, and Shuangqing mobile phone to restart again.