-
Car cleaning refers to the cleaning of the inside and outside of the car, which is more delicate and cleaner than traditional car washing. The car fine washing service is good, there are many steps, the equipment is perfect, and the cost is high, resulting in a slightly higher **. Generally, it includes services such as body washing, interior cleaning, engine compartment cleaning, wheel cleaning, body waxing and polishing, interior care, and in-vehicle sterilization and disinfection.
The specific process is as follows:
Car Cleaning Process.
1. Collect the car and sort out the items in the car.
2. Wash and wipe the body.
Wash the stains on the car body and wipe off the water.
3. Clean the engine compartment.
Clean the dust and grease in the engine compartment.
4. Clean the tire hub.
Cleaning of wheels, tire coating.
5. Clean the interior.
Dust and clean the instrument panel, center console, steering wheel, air conditioning vents, seats, floor mats, headliners, door panels, and trunk in the vehicle.
6. Interior care and sterilization and disinfection in the car.
The interior is varnished and maintained, and the car is sterilized, disinfected, and deodorized.
7. The body is waxed and polished.
After cleaning the body, wipe off the water and then wax and polish.
8. The items are returned to the car and delivered.
-
1. Vacuum and clean up the items in the car.
The first step of cleaning is to remove the dust from the car, sweep away the large dirt, and then use a vacuum cleaner to suck up the dust in the carpets and the crevices of the seats.
2. Clean the control room.
The instrument panel and steering wheel are mostly made of plastic and leather, which is easy to adhere to dust, but it is also easier to clean. It must be noted that because the instrument panel is exposed to sunlight for a long time, it is easy to age and embrittle, so it is best to choose the best watch plate wax spraying, and then wipe it clean with a clean cotton cloth, so that the instrument panel can be well protected.
3. Clean the air duct of the air conditioner.
Remove the air outlet of the air conditioner, insert the thin tube of the air conditioner cleaner into the air duct of the air conditioner, and spray an appropriate amount of air conditioner cleaner. Then turn off the air outlet of the air conditioner, turn on the internal circulation of the air conditioner, start the engine, and idle for about 10 minutes. Clean the air conditioner filter at the same time.
4. Cleaning of chairs:
1) When cleaning the chair of flannel or other fabrics, spray the high-efficiency foam cleaning solution to the dirt, leave it for a while, and wipe it carefully with a clean dry towel after the foam is completely absorbed until the stain is removed.
2) When cleaning the leather seat, you can choose a strong alkaline cleaning agent, such as soapy water, etc., and wipe it dry with a cotton tissue after washing. However, due to the frequent washing of artificial leather and leather of leather seats, cracks will easily occur and affect the service life, so it is recommended that car owners can buy special cleaning products, such as leather paste and leather care detergents for cleaning and care.
-
1. General washing, including manual high-pressure water cleaning and computer car washing, is first washed with high-pressure water, then foam scrubbing, high-pressure water rinsing, towel drying, is a simple cleaning of the car's exterior paint, glass, tires and interior dashboard, center console, seats, door lining and other parts of the car Vacuum treatment The equipment is relatively simple The supplies are only car wash liquid and tire wax, etc. **It is also relatively cheap 2. Fine washing First rinse with low-pressure water, then spray the sediment loosening agent (also called pre-washing liquid), and then rinse with low-pressure water to remove the sediment It can better protect the car paint, and also increases the professional cleaning and care of the engine compartment, corners, and gaps, tires, and wheels, and the inner room is cleaned with tornadoes, such as the instrument panel, center console, air conditioning outlet, door lining, and floor mats, etc., because of the different charges, some have also increased the professional cleaning of the inner room, and the general cleaning is the most common car cleaning care, and the cleaning process of equipment and supplies is relatively simple.
-
Hello! The general fine washing of automobiles includes cleaning the body, cleaning the chassis, and cleaning the interior. As the name suggests, fine washing is more careful than ordinary car washing, and the car will be cleaner after washing.
When performing fine washing, some professional cleaning agents are generally used. Some car washes are very expensive, I hope it can help you, thank you!
-
Wash the body, wash the chassis, clean the interior. Under normal circumstances, the fine washing of the car is more than 100 yuan, and the fine washing of the car includes the cleaning of the car appearance, interior, engine compartment, trunk, etc. The first is a simple cleaning of the car's appearance.
Fine washing pays more attention to the protection of car paint while cleaning. After the exterior of the car is basically cleaned, spray the car wash liquid again and scrub it with a sponge. The whole process is characterized by being more refined.
Make sure the paint is as undamaged or scratched as possible.
Precautions for car fine washingSpecial car washing liquid should be used, and it is strictly forbidden to use soap or dish soap, because this kind of supplies are highly alkaline, which will cause the paint surface to lose its luster, produce local color difference, seal rubber aging, and accelerate the metal corrosion of the local paint surface falling off.
When washing under high pressure, the water pressure should not be too high, generally not higher than 7MPa, and the whole car should be cleaned with dispersed mist water flow first, and then rinsed with concentrated water flow after infiltration. In the case of pressure-adjustable washers, the water pressure can be higher when the chassis is flushed so that sludge and other build-up can be washed off the floor. When washing the body, you can turn down the water pressure, if the water pressure and water flow of the body are too high, the dirt particles will scratch the paint layer.
-
Car wash is a home-cooked meal for car lovers, some people feel that they only need to look neat and tidy, and some people feel that a car wash needs to be washed from the inside out in a timely manner, which is related to the driver's habits, hobbies, consumption concepts, etc., which also has a fine car wash service project.
What is included in a car wash.
Car washing refers to the cleaning of the inside and outside of the vehicle, which is more delicate and tidy than traditional car washing. The car fine washing service is thoughtful, the process is many, the machinery and equipment are sound, and the cost increases, resulting in a slightly higher price. Generally, it includes services such as body cleaning, interior cleaning, engine cover cleaning, wheel rim cleaning, body polishing, waxing, polishing, interior medical care, and car sterilization and disinfection.
The practical steps are as follows:
Car Cleaning Steps.
1. Deliver the car and sort out the objects in the car.
2. Body cleaning and scrubbing.
Wash the dirt from the car body and wipe off the water.
3. Clean the engine cover.
Clean the dust and oil in the engine compartment of the car.
4. Clean the tire hub.
Cleaning the coating of the rim and the surface of the tire.
5. Clean the interior.
Carry out ash removal and cleaning on the center console, instrument panel, car steering wheel, air conditioning port, seat, cushion, canopy, door frame and car trunk in the car.
6. Interior medical care and sterilization and disinfection in the car.
Carry out glazing medical care and maintenance on the interior, and carry out sterilization, disinfection and odor removal in the car.
7. Body polishing, waxing, grinding and polishing.
After cleaning the body and wiping the water, polishing, waxing, polishing and polishing are carried out.
8. The object returns to the position and departs.
-
Car washing is a common practice for car owners. Some people think that as long as it looks clean, some people think that car washing should be done from the inside out, which is related to the habits, preferences, and consumption concepts of car owners. This also has a car wash service for intensive washing.
What's included in a car wash!
Fine car wash refers to the cleaning of the inside and outside of the car, which is more delicate and clear than the traditional car wash. Fine car wash service is good, there are many steps, the equipment is perfect, and the cost is high, resulting in a slightly higher **. Generally, it includes body cleaning, interior cleaning, engine compartment cleaning, wheel hub cleaning, body waxing and polishing, interior care, car sterilization and other escort services.
The specific process is as follows:
Car fine washing process.
1.Collect the car and organize the contents of the car.
2.Wash and wipe your body.
Wash the stains on the car body and wipe the water dry.
3.Clean the engine compartment.
Clean the engine compartment of dust and grease.
4.Clean the tires and hubs.
Clean the wheels and coat the tires.
5.Clean the interior.
Dust and clean the dashboard, center console, steering wheel, air switch, seat, floor mat, roof, door panel, and trunk in the car.
6.In-vehicle care and in-vehicle disinfection.
Interior polishing and maintenance, sterilization and deodorization in the car.
7.Waxing and polishing the body.
After the body is cleaned and dried, wax and polish.
8.Recommended reading for returning the car: Is it necessary to wash ordinary cars carefully, and how much is a fine car wash?
Millions of car purchase subsidies.
Compulsory traffic insurance, car damage insurance, third-party liability insurance, theft insurance, and deductible insurance. >>>More
There are many ways to classify cars, but the most important way is to classify them according to their purpose. >>>More
Shanghai GM Buick:
Buick old models: G, GL, GLX, New Century, GS >>>More
Three major trends in automotive services.
The first is computer car washing, because labor costs are getting higher and higher. >>>More
The number of cars is increasing year by year, car brands and the quality of cars have become a problem that consumers are very concerned about, in addition to sales, that is, the failure rate and complaint rate, the key is how you look at this problem.