odm dd101A watch how to adjust the time

This, very easy, it only has one button, which is on the right side of the front.

Originally, there was nothing to display, you press it, it will display the time, press it again and it will display the date, don't press it, after a while, it becomes a waiter state again. Repeat this and you'll be able to see the time and date.

As for the adjustment, it is in the state of waiting (when there is nothing to display), press it, when the time is displayed, you press it again and again (this one is pressed for a long time, about 2-3 seconds), let go, you will see that the clock display of the time is flashing, when you press the button quickly, press the right number and let go; Release for 1 second and repeat the steps to adjust the time number, and you can adjust the minute, month, and date.

Try a few more times, and when you first start tuning, you don't press well.

dd99 Time Setting Method:

Note: In the following operations, when the watch is to be held horizontally, it must not be shaken, and it will be useless if it is shaken).

First of all, use a small stick (ballpoint pen, small screwdriver can be) to align the button (set key) on the back of the watch, and then hold the watch horizontally, when displaying the time (not to display the time, the watch is tilted 45 degrees and then flat to let it display the time), one: after pressing the set button for 3 seconds, the "hour" number of the time at this time begins to beat, and then increase the hour by pressing the set key (long press the number for 3 seconds to accelerate the jump), two: after setting, the watch is tilted 45 degrees and then flat, at this time the time of the "minute" The number starts to beat, and then increase the score by pressing the set key (long press for 3 seconds to accelerate the number beating), three: After setting, the table is tilted 45 degrees and then placed flat, and the screen displays m-t-d (indicating that the screensaver displays "info-time-date").

Or monly (which means that only "Information" is displayed when the screensaver is displayed), and then press the SET button to select the screensaver format (this setting is not available in the old style).

Four: After setting, the table is tilted 45 degrees.

The date setting method is similar to the time setting method, but the differences are as follows:

1: The first step is to set the "language" (the old machine does not have this setting).

2: There is no "third" step.

Long press a button next to it, and it will jump out of the interface of picking time, as long as you press the next button one by one according to your needs.

Note: In the following operations, when the watch is to be held horizontally, it must not be shaken, and it will be useless if it is shaken).

First of all, use a small stick (ballpoint pen, small screwdriver can be) to align the button (set key) on the back of the watch, and then hold the watch horizontally, when displaying the time (not to display the time, the watch is tilted 45 degrees and then flat to let it display the time), one: after pressing the set button for 3 seconds, the "hour" number of the time at this time begins to beat, and then increase the hour by pressing the set key (long press the number for 3 seconds to accelerate the jump), two: after setting, the watch is tilted 45 degrees and then flat, at this time the time of the "minute" The number starts to beat, and then increase the score by pressing the set key (long press for 3 seconds to accelerate the number beating), three: After setting, the table is tilted 45 degrees and then placed flat, and the screen displays m-t-d (indicating that the screensaver displays "info-time-date").

Or monly (which means that only "Information" is displayed when the screensaver is displayed), and then press the SET button to select the screensaver format (this setting is not available in the old style).

Four: After setting, the table is tilted 45 degrees.

The date setting method is similar to the time setting method, but the differences are as follows:

1: The first step is to set the "language" (the old machine does not have this setting).

2: There is no "third" step.