What is the principle of the access control controller of the ID card elevator, the details are poin

The elevator internal selection button (floor button) generally has four wires, two power lines, two signal lines, the card reader is just a switch, one of the signal lines of the button is disconnected, and the control signal line of the card reader is strung into the disconnected signal line. When someone swipes the card, it is equivalent to the button signal line is connected to realize the floor selection, and when no one swipes the card, the button signal line is disconnected and the floor cannot be selected.

Hello dear and happy to answer for you. Most of the elevator access control cards in China are ID cards or IC cards, most of them are IC cards, you carefully look at the surface of the access control card, the front of the access control card is marked with ten digits, and the back is marked with eight digits, it belongs to the ID card, and the front and back of the access control card are blank, if there is no number, it belongs to the IC card. IC cards have a higher security factor than ID cards because ID cards can only read ID numbers, while IC cards can not only read relevant information, but also encrypt them.

Hope mine is helpful to you! Don't forget to give it a thumbs up! I wish you a happy life, peace and joy!

The so-called "elevator control" is actually a control technology of the elevator, and the original elevator is equipped with a system device similar to access control, and the elevator can only be used after swiping the card.

The reason why we want to install the elevator control system is because it can greatly improve the transportation efficiency of the elevator, reduce the waiting time of passengers, and save electricity. The intelligent elevator IC card control system is a new product developed for this purpose.

Its working principle is to install IC card elevator control system on the original elevator system, which does not destroy the original structure of the elevator, but only takes over the elevator call button or internal selection button, realizes the restriction of the use authority of the elevator, and brings a variety of benefits to the use of the elevator.

1. Elevator IC card floor control:

1. Swipe the card to reach the designated floor. At the time the card is issued, the cardholder is granted access to the floors. When using, when the user enters the elevator and swipes the card on the card reader, the access control main control board judges whether the card is valid and can reach the authority of the floor, and converts the signal into the start of the relay through the output conversion board, then automatically press the corresponding floor button, and the elevator can go to the designated floor.

At this time, the cardless user button is invalid, and the illegal use of the elevator is restricted.

2. After swiping the card, open the button permission, and manually press the button to reach the floor you want to go to. When the card is not swiped, the buttons on other floors are locked except for the public floor button. After swiping the card, the elevator access control opens the button of the authorized floor, that is, the relay conduction button corresponding to the button of the authorized floor is effective, and the elevator starts to run only after the user presses the button of the authorized corresponding floor.

Unauthorized floor buttons are invalid.

2. Elevator IC card personnel control:

1. The owner takes the elevator: after the owner enters the elevator car, the card is swiped, and the elevator is directly started to reach the owner's floor, without any manual operation, and other controlled floors cannot be reached, and the person without a card or holding an illegal card cannot directly use the elevator.

2. Mutual visit function: There are two situations for residents to visit each other: one is mutual visit within the unit, and the visitor can be informed of the password; Another scenario is the exchange of visits between units, which is equivalent to a visit.

3. Password to take the elevator: Residents can also enter the designated floor by entering the designated floor number and password on the card reading password keypad in the case of forgetting to bring the card and the visitor to take the elevator.

4. Property management elevator: property management personnel can configure one or more cards that can go to some units and some public floors according to the company's authority.

5. Temporary visitor elevator: the visitor connects to the household extension through the building intercom of the unit door of the residential area, and the door is opened by pressing the door opening button of the intercom extension after the resident agrees; At the same time, the resident extension sends a switching signal to the elevator for the open authority of the resident's floor; After receiving the switching signal, the elevator IC card system controls the corresponding resident floor button of the elevator to open for a certain time, and the visitor summons the elevator to enter the elevator car and then presses the floor key of the resident to reach the floor, and other restricted floors can not be directly reached by pressing the button.

For the floor control function of the elevator IC card, the control function of the elevator IC card effectively controls the cardholder's access to the specific allowed floor, preventing personnel from entering and exiting each floor at will and ensuring property safety.

Here's how to get the elevator access card on your phone:Tools Ingredients: Xiaomi 10, MIUI, Xiaomi Local Settings.

1. Turn on your phone and tap the Mi key card in Mi Wallet.

2. Then click on the plus sign in the lower right corner.

3. Then click on the keycard.

4. Finally, put the NFC position area close to the turnstile, and wait for the induction copy to be completed.

Let's first show you a configuration list of elevator access control systems.

Shenzhen Colt Industrial ****.

Our company has an elevator access control system, according to customer needs, we divide the elevator access control system into 3 modules, the 3 modules can work alone, or the system can be integrated!

1) Floor-controlled elevator management system.

2) Intercom linkage elevator system.

3) Elevator group control elevator system.

If you need or want to know more about it, it is recommended that you take a look at Shenzhen Colt Industry******,**The elevator control system module has a detailed introduction above!

Elevator Access Control System!!

There are several ways, I don't know which one this one to choose!!

The standard elevator access control system realizes the authorization of some floors with a card, so when the person wants to go up to these floors, he needs to swipe the access control card, and then according to the corresponding floor, he can enter the authorized floor by swiping the card. There are network types and 422 industrial communication types in this way. Equipped with communication methods according to the needs of the site.

There is also a linkage that has more functions and is also very complex! It's about building with owners! There is a building intercom!!

In addition to realizing the function of the above standard elevator access control, it can also be realized, the management of outsiders, when an outsider visits the owner, he confirms with the owner through the intercom host under the elevator, and the owner confirms that the button on this floor of the elevator is triggered through the intercom extension button, and the elevator is sent to the 1st floor, then the visitor can only reach the floor where the owner is located!! More convenient management of outsiders!! It's networked!!

The structure is more complicated, and it needs the assistance of intercom and elevator!!

Elevator access control is a branch of the access control system, which can control and manage the elevator passengers, prevent idle people from arbitrarily riding the elevator to enter and exit the control area, so as to improve the safety management level of the control area.

Elevator access control identification methods mainly include: card recognition, password recognition, biometrics; Elevator access control realization function: through the access control module on the first floor, realize the control of the call button of the elevator car on the first floor, call the elevator.

For example, if you take the elevator with a card, the floor that each card can reach is specified by the property management department when issuing the card. The cardholder does not need to press the button to select the designated floor to summon the elevator to stop the floor to be reached; It can neither be summoned nor docked on non-designated floors.

The elevator access control system is controlled by the owners of each floor to select the button, generally in the car is installed IC card reader, each floor owner is assigned an IC card, IC card corresponding to the floor selection, such as you are the owner of the 5th floor, your IC card corresponds to the 5th floor selection button, you swipe the card to register the 5th floor, the elevator will run to the fifth floor, so that you are the fifth floor, you can not choose other floors.

At present, there are many products on the market, and I know that Langfang Bona, Shenyang Blu-ray have similar IC card machines.

Like the community access control, I want to take the elevator to swipe the card.

1 floor shield can control 16 floors, and 1 controller can control up to 64 floors with 4 floor panels. The floor expansion is flexible and convenient, adding floor control, no need for any settings, the system automatically adapts, no need for DIP switches and other settings.

2. The control system is connected by passive nodes, completely isolated from the original elevator system, and will not have any impact on the original performance of the elevator.

3 Each user can set different permissions, and can authorize users to have single-story floor permissions, multi-story floor permissions, or all floor permissions.

4. Time permission setting, different users can be set to use the elevator in different time periods.

5. The system stores 10,000 blacklists and 10,000 card records.

6 It is convenient and flexible to report the loss of a lost card, without the need for networking, and the use of intelligent data collection to report loss.

7 Swipe the card fire function: swipe the fire card system once to enter the fire fighting state, the elevator is restored to the ordinary elevator, and then swipe the fire card again The elevator is taken over, and only the card can be used to use the elevator.

8 Swipe card control function: swipe the control card system once to enter the control state, except for the control card, other cards can not be used. Swipe the control card again and the system will return to normal.

9 Card reception function: swipe the reception card once, the floor with the permission of the reception card has been open, the user can press the elevator button directly without swiping the card, and the reception card system will return to normal again.

10 With the unique intelligent data collector, parameter setting, data collection, card loss reporting operation is very simple, no user intervention as long as the intelligent data collector is inserted into the data acquisition interface, the data collector will automatically complete all operations, prompt the user to unplug the data collector after the prompt is successful.

11 Offline application, simple wiring, elevator control system offline operation function. Parameter setting, data transmission is very convenient and intelligent, without manual intervention, completely automatic completion to achieve real intelligence.