Tips for energy conservation and emission reduction, methods of energy conservation and emission red

1. Save electricity. Be careful to turn off the lights and use energy-efficient bulbs. The U.S. Department of Energy estimates that 400 million tonnes of carbon dioxide could be avoided by replacing traditional light bulbs with energy-efficient light bulbs.

In addition to electric lights, you should also pay attention to the use of other electrical appliances, try to choose low-consumption energy-saving products, cut off or turn off the power when not using electrical appliances, and let the refrigerator be in a frost-free state. In summer, when the weather is not very hot, it is best to use a fan or electric fan instead of an air conditioner. When using the air conditioner, don't turn the temperature down too low, around 26 will do.

2. Save water resources. Much of the wastewater can be recycled. Water for washing face, hands, vegetables, bathing, and laundry can all be collected to wipe floors, flush toilets, water flowers, etc.

Rice washing water is a good stain remover, which can be left by Zen to wash dishes and chopsticks. Oil-stained pots and plates should be wiped clean with used napkins first, which is convenient to wash and save water, and you can also use less dish soap to reduce water pollution.

3. Save paper. The recycling of paper avoids the release of biogas from landfills and reduces the cutting down of trees. According to statistics, one ton of waste paper can produce 800 kilograms of recycled paper, which can cut down 17 trees, and saving paper is to protect forest resources and protect the environment.

4. Reduce exhaust emissions. Traffic exhaust gas and industrial waste gas are the main domestic waste gases. We try to go out by bus or taxi, we can also ride a bicycle and try not to take a private car.

A large amount of billowing smoke from the burning of garbage in factories and the production of goods fills the city. They should process and filter the exhaust gas before emitting it to reduce pollution. Plants can absorb carbon dioxide and then release oxygen, so we need to plant a lot of trees, especially along roads.

5. Garbage classification and disposal. Waste sorting can be a valuable resource while reducing the amount of energy consumed by landfilling and incineration. For example:

Waste paper is sent directly to the paper mill to produce recycled paper; Single-use items such as beverage bottles, cans and plastics can also be sent to the relevant factories to become renewable resources; Household appliances can be sent to a specialized manufacturer for disassembly**. You can prepare different garbage bags at home, collect waste paper, plastics, packaging boxes, etc., and carry out garbage classification and garbage classification every day and every day, so as to "turn waste into treasure".

1. Industrial structure: Adjust and optimize the industrial structure and reasonably control the increment.

1. Mainly control or inhibit the excessive growth of high-energy-consuming and high-polluting industries;

2. Accelerate the elimination of backward and obsolete production capacity;

3. Gradually improve and promote the policies and measures for the optimization and adjustment of the industrial structure;

4. Vigorously promote the adjustment of the energy structure, and strive to promote the accelerated development of energy-saving services and high-tech industries.

Second, the implementation of energy-saving projects.

1. Increase investment in important projects and accelerate the implementation of key energy-saving projects;

2. Water resources saving eggplant project. Speed up the construction of water pollution control projects.

3. Promote the treatment of sulfur dioxide in coal-fired power plants. Raise funds for energy conservation and emission reduction through multiple channels.

3. Innovate models and accelerate the development of circular economy.

1. Vigorously promote the comprehensive utilization of resources and deepen the pilot project of circular economy.

2. Promote the resource utilization of waste, waste reuse, industrial waste heat utilization, etc., and comprehensively promote cleaner production and low-carbon economy.

Fourth, relying on science and technology, innovation and development, accelerate the development and promotion of technology, research and development of new energy-saving technologies, energy-saving materials.

1. Accelerate the research and development and promotion of energy-saving and emission-reduction technologies, and accelerate the industrialization demonstration of energy-saving and emission-reduction technologies.

2. Establish a dust rental system for energy-saving and emission reduction technical services to promote the healthy development of the environmental protection industry.

3. Improve the production efficiency of energy, and continuously develop new energy and new materials.

Fifth, consolidate the foundation of energy conservation and strengthen the management of energy conservation and emission reduction.

1. In terms of administrative management: establish an accountability system for energy conservation and emission reduction in government departments.

2. Establish and improve the energy conservation and emission reduction index system, monitoring system and assessment system, and establish energy conservation standards.

6. Strengthen supervision and improve standards.

1. Increase the supervision and inspection and law enforcement of enterprises with high energy consumption and emissions.

2. Improve energy conservation and environmental protection standards, carry out special law enforcement inspections for energy conservation and emission reduction, and encourage energy conservation and emission reduction.

Seventh, gradually form an incentive and restraint mechanism.

1. Promote the product development network of resource industries and promote the development of technology.

2. The system is conducive to the fiscal policy of "energy conservation and emission reduction, energy conservation and efficiency improvement", and the implementation of tax policies that are conducive to "energy conservation and emission reduction, energy conservation and efficiency improvement".

Ingredients: corn, carrots, peas, pine nuts.

Method: 1. Cut the corn kernels with a knife for fresh corn, cut the carrots into cubes, peas and pine nuts for later use;

2. After the water in the pot boils, add a little oil and salt, put in the peas and cook for seven or eight minutes, remove and set aside, put in the corn kernels and cook for two or three minutes, remove and set aside, and chop the green onion for later use;

3. After the oil in the pot is hot, add the chopped green onion and stir-fry until fragrant, stir-fry the diced carrots evenly, add the peas and corn kernels and stir-fry for two minutes;

4. Add salt and mushroom essence to taste, add pine nuts and stir-fry evenly.

Pepper corn kernels.

Method: 1. Wash and drain the fresh corn and set aside; Wash the green peppers and cut them into small cubes for later use;

2. After the oil in the pot is heated to 7, add garlic slices and dried peppercorns and stir-fry until fragrant, then pour in corn kernels and stir-fry well, add water; Stuff until the corn is soft and the water in the pan is dry;

3. Add the green pepper and stir-fry the raw pepper, add salt to taste. This dish is refreshing and delicious, and it is the best accompaniment to white porridge and is suitable for summer consumption.

Olive oil, corn, fruit salad.

Method: 1. Add water to the pot, put in the sweet corn, add a little salt, and cook the corn.

2. When boiling corn, we will process the other ingredients.

After the apples are washed, scoop out the pulp with a ball digger and soak the pulp in lightly salted water. In the same way, dig out the kiwi pulp for later use.

3. After the corn is cooked, take the grains, pour them into a large bowl with the apple pulp and kiwi pulp, add 1 tablespoon of olive oil, and mix well.

4. Sprinkle the blueberry jam into the mixed salad.

Tips: 1. Apple flesh is easy to oxidize and discolor, soak it in light salt water to prevent apples from turning yellow and dark.

2. When boiling corn, add a little salt to make the cooked corn sweeter.

Corn searing.

Method: 1. Pour out the corn kernels in the can and drain out the excess water.

**。2. Sprinkle with dry starch and mix well, try to stain the surface of each corn kernel with dry starch.

**。3. Heat a frying pan and add a little oil.

**。4. Pour the corn kernels into the pot and flatten them with a spatula.

**。6. Turn on medium heat, increase the oil temperature and continue to fry for 3-5 minutes, turn off the heat until the corn kernels are golden and crispy, pour out the oil, and sprinkle sugar on the corn to remove from the pot.

1. You can also cook fresh corn and peel off the corn kernels to make it.

2. The corn kernels do not need to be too dry, and the moist point can be stained with dry starch.