If you install a ceiling fan on a plasterboard ceiling, will it fall off?

If a ceiling fan is installed on the ceiling of gypsum board, it will definitely not fall off, because the gypsum board is very strong, and the special thick installation of the ceiling fan is very perfect, and it looks very beautiful.

The fan is installed directly on the plaster ceiling, which is not very stable and has the risk of falling off. Because the bearing capacity of the gypsum ceiling is relatively poor, the ceiling is mainly fixed by the wooden skeleton of the nail, and if you want to install the ceiling fan, you need to fix it with the original ceiling.

The ceiling fan will not fall off. Install ceiling fans in gypsum board ceilings and reinforce them during installation so that they will not fall off.

Generally, it is not recommended to install ceiling fans on the wall of the ceiling, because the wall behind the ceiling is hollow, and then install the ceiling fan, the wall cannot support the weight of the fan, especially in summer, it is easy to fly out, and it is very likely to fall down.

I think it's nice to install a ceiling fan on the roof, and then the whole space will look very good, and it's very three-dimensional, and it won't feel particularly hot at this time even in summer.

Of course, you can, but for safety reasons, don't install it, it's easy to fall and hurt people.

Home improvement gypsum board ceiling, you can also install ceiling fans on the roof, because the ceiling has nothing to do with whether the ceiling fan can be installed.

OK. Because my house is made of gypsum board ceiling, and I also installed a ceiling fan, there has been no problem, so it can be installed.

It is feasible to install a suspended ceiling in a room where a plaster macro board has already been installed, but the following points need to be noted:

1.Make sure that the original drywall is firm and reliable. If the gypsum board has problems such as looseness, cracking, etc., it needs to be repaired or replaced first.

2.Determine the weight and type of new ceiling. Different types of ceilings have different weights and strengths, and it is necessary to choose the appropriate ceiling material according to the actual situation. If the selected ceiling is too heavy, it is necessary to strengthen the bearing capacity of the original gypsum board.

3.Choose the right installation method. Common ceiling installation methods include "direct hanging method", "structural ceiling method" and "surface ceiling method". Choose the appropriate installation method according to the actual situation.

4.Attention needs to be paid to the gap between the ceiling and the wall or other building components in order to achieve an aesthetic effect.

In conclusion, before installing a suspended ceiling, you should conduct a comprehensive evaluation of the room and carefully consider the selection of materials, design options, and construction personnel to ensure the quality and safety of the ceiling installation. It is best to find a professional construction team for installation, so as to avoid potential safety hazards in the later stage.

In general, if the drywall has been hoisted, a suspended ceiling can be installed on it. However, there are a few things to keep in mind:

1.Determine the quality of the plasterboard and grip the sail and the load-bearing capacity to ensure that the weight of the ceiling can be supported.

2.Before installing the ceiling, it is necessary to check whether the surface of the plasterboard is flat, and if it is not, it needs to be treated.

3.Before installing a suspended ceiling, it is necessary to determine the installation location and method, and carry out operations such as drilling or punching holes as needed, which may affect the strength and stability of the drywall.

4.If you are unsure of your ability and experience, it is recommended to find a professional renovation worker to carry out the construction to ensure safety and quality by hail.

The installation height of the ceiling fan should be appropriate, 62616964757a686964616fe58685e5aeb931333431366339

Generally, the distance between the fan blade and the ceiling is 400 500mm, which is too close to the ground and easy to hurt people, and too close to the ceiling affects the airflow behind the blade and reduces the air volume. Fan installation step 1, installation preparation:(1) Turn off the power and turn off the power at home, and then start to install the ceiling fan.

(2) Generally, the installation location of the ceiling fan is the center point of the houseYou can draw two diagonal lines on the roof of the living room, and the intersection is the center point of the house. Then fix the side of the new junction box of the ceiling fan directly at the keel closest to the center point. Ceiling fan installation step 2, install the junction box to supply power to the ceiling fan and the lamp (if applicable) at the same time, and use a switch to control the switch; Power the ceiling fan and/or lights at the same time, and control the switches with the RF remote control included in the ceiling fan attachment or purchased separately.

Ceiling fan installation steps.

3. Connect the power cord if you use a 14-2 or 12-2 wireFollow the standard color-coding scheme to connect the wires to the ceiling fan: white wires to the white wires of the ceiling fan, bare (or green) wires to the ceiling fan ground wires, black wires to the ceiling fan black wires, and blue wires (if available). Ceiling fan installation step 4, assemble the ceiling fan to assemble the blades and bracket components together, and then connect the combination of the blades and the bracket with the motor one by one.

Ceiling fan installation step 5, install ceiling fan (1) install the hanger bracket on the box with screws and locking washers, and then fix the assembled ceiling fan to the mounting ring through screws and cover it on the fan motor housing. If you have high ceilings, you may need to add a hanger tube. (2) Then connect the power supply and connect the power cord with the control switch.

Because gypsum board ceilings generally have a fixed keel, they only need to be fixed on the keel.

Inside the gypsum board ceiling is a wooden keel, which is a wooden square frame. The gun nails are fixed and strong, and the weight of the ceiling fan can be withheld. The decorator can get it.

If you install a ceiling fan, you must first pay attention to the height system you install, and you must pay attention to turning off the power supply at home, which is relatively safe.

First of all, the ceiling fan should be installed at a safe height, and the state stipulates that the safe height of the ceiling fan should be meters from the ground.

This will not be affected too much, and it can be installed however it wants.

Plasterboard is more difficult because it will be loose.

A hole can be drilled in it with an electric drill. Then ask the master of installation to install it.

It's better to pay attention to the profile of your previous class when you just catch it.

Inside the gypsum board ceiling is a wooden keel, which is a wooden square frame. The gun nails are fixed and very strong.

Of course it can be installed:

If the weight of the ceiling fan is average, then at the position to be installed, cut part of the gypsum board, increase the local strengthening keel, and level the gypsum board after installation (scrape the putty after repairing, repair the paint, and no traces can be seen).

If the electric fan to be hung is heavier, it is necessary to cut the gypsum board area is relatively large (a person's head can be stretched into), and then add hanging bars (metal hanging bars) to connect with the ceiling of the original building structure and install the embedded structural parts, seal the top surface, and finally install the ceiling fan on the embedded parts.

Strictly speaking, it is unsafe and unsightly to install a ceiling fan on a gypsum board ceiling, even on a keel. If you really want to install it, it is recommended that there is only one way: first, remove the gypsum board at the installation position and install an expansion hook on the top cement top, with a size of at least 14 mm.

Then hang a 10 mm round steel along the hook to stretch below the top surface of the gypsum, and hook the ceiling fan at the lower end; The hook attached to the ceiling fan should be as small as possible, but it should be safe. First, open a hole of the same size as the hook in the removed gypsum board, install it through the round steel hook, and then hang the ceiling fan.

That's not feasible, that will affect your renovation effect on the one hand, your house has been renovated for a few years, then it will be destroyed. Neither the light steel keel nor the wooden keel can withstand the rotational force of the ceiling fan. If your house is still under renovation, then you can directly punch holes in the top and hang it with anti-theft bolts and screws to reinforce, and you can leave a certain amount of space to prevent the ceiling fan from making a noise when it hits the gypsum board when it rotates.

The roof should have a keel, and then plasterboard! Your ceiling fan must be installed on the keel in order to eat strong gypsum board is not good!

You can't add a ceiling fan to the keel, even the light steel keel can't withstand the swing of the fan, it is easy to bend, or even fall off, you can dig a hole, let the workers go in, make a hole in the ceiling to fix the fan, and then close the hole, but the putty scraped again will be easy to see.

Of course, it is not possible to install a ceiling fan directly on the ceiling! This problem is very easy to solve, as long as the angle steel bracket is installed in advance in the ceiling opening, according to the ceiling elevation, and then make up the gypsum board, so that the ceiling fan is no problem after installation! Safety comes first!

Hello friends, you want to install a ceiling fan on the top of the plaster, I think you can, just install it on the top, install the structure on the ceiling, don't touch the gypsum board and keel, there will be no vibration and strange sound, just for reference I hope it will be useful to you.

It is a mistake to install a ceiling fan on the gypsum board and keel, when the ceiling fan rotates, there will be a certain swinging phenomenon, which will cause the expansion bolts to loosen, and the ceiling itself has a lot of weight, and the ceiling will fall down after a long time. It is better to punch holes in the roof of the wall for special reinforcement, and it is better to fall directly on the roof.

If it doesn't work, the ceiling fan base must be installed on the concrete of the roof, which is unreliable on the wooden keel. Also how big is the size on your keel. If it is in 10cm or steel keel can be considered.

It is feasible to install ceiling fans on a house with a plasterboard ceiling. But before making the keel you can install a block wrench in the position of the ceiling fan, the thickness of the wrench should be basically about the same as the height of the keel frame, and then this part of the keel frame is nailed to the wrench, so that people will be solid and safe.

There should be a wooden frame behind the gypsum board, and you can do it on it, but it is estimated that it will not work directly on the gypsum board

Or don't install it, you can use a floor fan, in fact, the wind effect of the ceiling fan is average.

You can find the wooden keel, but the wooden keel is not easy to find!!

Cancel this program Danger !! If it must be installed, it is feasible to support a steel pipe from the ceiling through the gypsum board before sealing the gypsum ceiling

It's better not to install so many kinds of tower fans now Wind strong beautiful That is useless Unless the small hotel is in use.

With a high-quality light steel keel, people have no problem falling on it.