PS2 How to get the card of a Monster Hunter 2 comrade in arms

There must be, to do a specific task, but you can also use the old gold to change.

Are you using AR2 or XP?

Although it's almost the same to use...

However, the gold finger code of XP and AR2 is not the same!!

First know what kind of cheat you use, and then look up the cheat code on the Internet. Check it out!!

Then start typing the cheat code.

M is the must code, that is, you must lose! Don't make a mistake, or it will be ineffective, or it will directly lead to the inability to play!! Create first, and then enter according to the code on the Internet, sometimes the must code will be more than 2, all entered!!

Then create a new one! It's like putting different information in different folders! To change money, or whatever, enter it according to the known code...

The back is to classify the yards you want and enter them separately!! Execute it again (ar2 just press start).

Take it out directly!! Don't reboot!! Change the game board, enter the game, and enter the correct OK

Buy a PS2 gold finger disk, search for gold finger code on the Internet, read the disk and run, enter it, open the cover, put it in the game disk, and it's OK.

Do you know that there is a revisit to the store? If you know, go there, I go to play every day.

There's no other way than to sort out the boxes.

PS2 Monster Hunter 2 has a network part, but it requires genuine disks and has to be paid, and it has ceased to operate, so there is no other way than to arrange boxes.

Your plate is ordinary OL can arrange boxes It's just that there is no golden fire dragon and silver fire dragon forbidden forging** can't be done.

Quests like the Golden Lion, the Black Dragon, the Old Mountain Crab, and the Octopus can all be connected by the row of boxes, and the equipment bar requires a fifth page.

The fifth page of the equipment bar can be bought from the riverside male trader (do more tasks for the riverside male trader and the female trader, after doing it a few times, the picture of the big ship entering the port appears, and you can buy a book to expand the equipment bar from the riverside male dealer immediately, and you can expand the equipment bar.) ）

On the fifth page of the equipment slot, you can arrange the chests.

Specifically, I hope it will be helpful to you.

Your plate is the same as mine, so only the row of boxes can be played on the top monster, and the non-row boxes can be connected to the upper position, only 4-in-1 can be.

Without de-101, you can only arrange boxes!

This is only possible in online battles. Give it points!

Can a PS2 that is not drained be connected to the phone?

Big Brother Monster Hunter is on PS2.

Can you open it with a PS emulator?

The PS2 emulator is very demanding on the computer hardware.

Is your configuration strong enough?

That zip package doesn't need to be unzipped

You use the emulator to load the file directly from before it was unzipped

Click config, then click the optical drive, and then enter the virtual optical drive file address. (That's the ISO file). Then OK.

Then click go, and then click Bootstrap Start and it's OK!! This is a PS2 Naruto Shippuden file. You need to use an emulator to simulate it, and after the simulation, you can play it on your PC!

.With PS2 emulator, you can't open it even if you die.

Don't unzip it, read it directly in the emulator,??

Wouldn't it be nice to load the game's roms directly with an emulator?

Final Fantasy 10, Final Fantasy 10 2, Final Fantasy 12 Metal Solid 2, 3

Whichever one is enough for you to play for a while, when you get tired, change to the Musou series (Dynasty Warriors, Sengoku Warriors), Sengoku Basara also belongs to the same type, or play WinningEleven, of course, it depends on whether you like this type or not.

Then there is the legendary series, which is recommended for the remake of the legend of fate that has just come out (not 2) Star Ocean 3, Resident Evil 4 ......

Alas, too much, too much. If you have a favorite type, it's good to recommend it.

I like Musou and RPG games.

Sengoku Warriors 2, Final Fantasy 12, Final Fantasy 10, Sengoku Basara 2, Norse Goddess 2.

Also, Pro Evolution Soccer is a good game.

Final Fantasy 12, Resident Evil 4, Monster Hunter 2, Devil May Cry 1&3, especially Monster Hunter 2, playing for 200 hours is not a problem.

Fighting classes include Tekken, VF KOF, etc.

RPGs include DQ8, FFX, FF12, Galaxy Ranger, Kingdom Heart, etc.

ACT has Devil May Cry, Oni Warrior, God of War, and Warriors of the Three Kingdoms. Warring States Musou and so on.

SLG Organic Wars 3 @ Demon World Wars and more.

FPS classes include Call of Duty, Killzone, etc.

So long a game... A lot of things have been forgotten ... There is a kind of gift in the primary maze of the game that I forgot to call it withering.。。

is all-attributed ... You can buy it in the middle ... Tell me about it.

This game vaccine is the best to use. Wait until you clear the customs. You can buy the best gifts.

There's a 99-story labyrinth where you can grab some of the ultimate bodies. And also defeated to catch the hidden omega.。。 Super Demon.

and the White Tiger. So it is recommended to play the game first.

How to make 2 inches with ps** and typography can be solved like this:

1. First of all, open the Photoshop CS5 software.

2. Then click "File", select "Open", and add the made**.

3. Find the ** you made and choose to open.

4. Select "Crop Tool" to set the parameter width and height, and resolution 300.

5. Select the location and press the enter key.

Are you sure. <>

6. Click "Image" and select "Canvas Size".

7. Set the canvas size parameter width and height to centimeters, and be careful not to forget to click on the next side.

8. Get the two inches that are done**.

9. Do the definition pattern, select, and define the pattern.

10. Then set up eight double rows. This makes it easy to print. Click New and set the width: cm, height: cm, and resolution 300 pixels.

<>12. Set the filling parameters.

13. Click OK, it's done, and you can save it. Pay attention to choose a good address when saving. Don't forget to set the format below.

And that's it.

How to make a two-inch **, how to make a 2-inch blue or red background document with ps**.

The method is as follows: 1. First use your camera or current smartphone to take a picture of a white background or blue background**, and then use Photoshop to open the ** that requires cropping.

2. Then click on the cropping tool and enter the following in the properties panel: width cm, height cm, resolution 300 pixels inches.

3. After setting, drag the mouse without drawing a box, and then drag the box to determine the avatar part to be cut. Once you're sure, double-click the mouse to clip.

4. Click on the image - canvas size, and set the canvas size to width centimeters and height centimeters.

5. The size of the canvas is a little larger than the ** cut just now, which is the distance between the photos and the photos, not too far away, just the size of the knife edge of a cutter, and the edge of the knife is just right, not to the edge.

<>7. Create a new image and name it 5-inch photo paper, because the photos should be arranged on 5-inch photo paper. Width, height, resolution of 300, color mode RGB, 32 bits, if not, select 16 bits. Just press enter to make sure.

8. Then find CTRL+J, create a new layer, and then click - Fill - Use: Pattern - Customize the pattern to find the small two-inch pattern just stored. Hit enter to make sure it's filled.

9. Finally, use the rectangle tool to select the extra part, and then press "Delete" to delete. Finally, adjust the distance and you're done. Be patient, or slowly adjust the distance and put one or two in the blank space.

Create a new 33mm*48mm (small 2-inch**) or 35mm*53mm (2-inch**) with a resolution of 300.

Drag ** into the above dimensions to adjust the size position.

Perform the good - define the pattern.

Typesetting, if you need to arrange 4 sheets horizontally and 4 vertically (not considering bleeding and borders), take the small two inches** as an example: the new canvas is 132mm (33*4=)*192mm(48*4=), and the resolution is 300

Select the paint bucket tool - pattern - select the already defined small two-inch **fill to complete the typesetting of 16 sheets**.

First of all, open a two-inch photo**, select the tool, select the color needed for the background fill, then click Crop, enter the size, width, height cm, resolution 300 in the options bar above, and then open the cropping box, go to the imaging area you want, and determine the cropping.

Typography below, execute the image, canvas size, height and width input cm, relative check, select white OK, execute, define the pattern, give a name, such as a two-inch photo, OK, and then create a new canvas, width cm, height cm, resolution 300, fill white. Execute, fill, select the pattern, find the two inches you just defined**, OK. Two-inch ** typesetting four sheets are completed.

How to make and change the background color of electronic ID photos - Ji Ji photo.

Method 1: Open ** in PS, click "Remove Background", resize and select the area marked to keep. Click "Keep Changes", then "Color" to select a solid fill.

Select the background color via the color option, then tap "OK" and "Crop". Select Crop in the cropping options, resize and click Crop again, and the cropping is complete.

Method 2 (Simple Pro):

1.Open the Jijizhao Mini Program on Alipay.

2.Select the size you need.

3.Upload an existing **, or reshoot.

4.One-click to change the background color and change the outfit.

Counting the total of 4 sets of the original set itself:

Initial comes with the Dark Falcon Dragon Set: Lower Ninja or Middle Ninja Turtles Set: Get 10 Super Ninja Ratings in Chapter Challenge Mode (Note that it is not a mission mode) The ugly Zhao Yun set:

The upper ninja mode is absolutely real.,I'm a super ninja difficulty clearer Ninja Dragon Super Fans have other questions about Ninja Dragons can continue to ask.。