How can I recover files deleted by mistake in my computer s hard drive? Have you ever found any of t

2. Then there are two scanning modes, "Quick Scan" and "Deep Scan", one is to quickly scan the lost data, and the other is to conduct a comprehensive scan to help recover lost files to the greatest extent.

3. Select the hard drive of the deleted files, after the scan is completed, you can view the lost files on the right side, find and check the files you want to recover, and then click the "Next" button.

4. Click "Browse", select a save path in the pop-up dialog box to save the recovered files, after the storage path is set, please click the "Recover" button to recover the files.

Hello, don't worry, first go to the computer ** station to see if there is a mistakenly deleted hard disk file, if there is, it is much simpler and more convenient, just drag it out from the ** station, if not, if you use data recovery software, it is not very complicated, difficult to do, its data recovery steps are as follows, 1, install mutual shield data recovery software.

2. Open the software and select the "Accidentally Deleted Files" mode.

3. Select the disk where the files were deleted by mistake and start scanning.

4. On the end of the scan page, check the file data you want to recover and save it to the computer (be careful not to save it in the original deleted file disk to prevent the file from being overwritten).

5. Wait for the software data recovery to complete.

It is not very complicated to recover files deleted by mistake on the hard drive in five steps. Hope.

If the computer has deleted files, don't mess with it, don't worry too much, because there are some ways to help us with data recovery.

In everyone's office life, the computer will store a lot of important data and files, where users can store their own file data in different hard disks, but the space in these hard disks is limited, we will regularly clean up some useless data after a period of time, and the accidental deletion of data will often occur when cleaning data.

So,How do I recover files that I deleted from my hard drive? Don't worry too much, let's share two simple methods that will restore you very well

1. Professional approach

Run".superrecoverysoftware and select "Accidentally Deleted Files" mode on the main interface. Then, you need to select the file types you want to recover and click "Scan". After waiting for the software to scan it, you can preview the list for free, confirm that you can click "Start Recovery".

Method 12. Convenient method

First, find the "Control Panel" option in your computer's startup window and find "File History" to open. Then, in the next interface, follow the prompts of the operating system and finally click on "Restore Personal Files".

Method 2

How to recover accidentally deleted files? Let's take a look at it today.

<><5. Find the file, click Next, select the path of storage and click Recover to retrieve the file that we deleted by mistake.

In the office and study, we will use the computer to contain thick luggage, the storage space of the computer is also limited, the longer the computer is used, the more and more files in it, clean up the computer, delete the computer junk files is what we often need to do.

So,How to recover computer hard disk files deleted by mistake? Don't worry, here are two ways to recover, and the recovery effect is very good

1. Simple way to recover

Friends who often use computers should know that no matter what system our computer is, there will be a tool called "Dong Chi ** station", its role is to temporarily save the files that we deleted, when you find that the file deletion error wants to recover, you can directly open the ** station, find the deleted file, and select "Restore" with the right mouse button.

Method 12. Professional method of restoration

Run".superrecoveryAfter the installation is completed, double-click to open the software, and directly enter the "wizard mode". What you need to do is to select the directory where you want to recover the data. In addition, you also need to set the scanning method and data type of the software.

Once you have confirmed that you have found the data, click "Start Recovery".

Method 2

First of all, you need to install a data recovery tool on your computer - iMyFone AnyRecover.

Then follow the steps below:

1. Select the recovery mode of the external controller.

Launch iMyFone AnyRecovery and select the "External Storage Device Recovery" mode from the home interface.

2. Connect the external controller to your computer.

3. Select the disk and file type.

Once the external device is connected, click Next and select the disk from which you want to recover data. Then, check the file type and click on the Scan tab.

4. Preview the files and start the recovery.

At this point, iMyFone AnyRecovery will take a few minutes to scan for the lost files and list them according to the file type. Click the Recover tab, preview the files and select the ones you want to recover.

Note: You can choose "File View" or "Tree View" to preview lost, deleted, or formatted files.

5. Global recovery.

If the "External Device Recovery" mode can't find your files, you can choose the "Global Recovery" mode to try again. The "Global Recovery" mode scans the lost files more deeply than the "External Device Recovery" mode.

6. Preview and recover.

Once the scan is complete, a list of recoverable files will be displayed, and you can choose to click either of the File View or Tree View tabs to preview the files. Then, click Recover and select the appropriate destination location to save the files.

Note: Make sure not to save the recovered files in an external device where you lost your files.

2. Select the location where the original data files are stored, you can directly select the corresponding data loss disk, such as the common D drive, and click the "Start Scan" recovery mode below to automatically scan the disk.

3. When the scanning is over, we can select the files we need to recover in turn according to the file path or file type, and at the same time, when the files are recovered, you can also double-click to preview the recovery.

Under normal circumstances, it is possible to recover the deleted Chinese files of the hard disk, and if the hard disk is deleted by mistake or formatted without other writing operations, it can basically be completely recovered.

DiskGenius can be used to recover accidentally deleted files

1. First, select the partition where the deleted files are located. Then click the toolbar button "Recover Files", or click the "Deleted or Formatted File Recovery" menu item in the main menu "Tools" to open the file recovery dialog box.

2. In the Recover Files dialog box, select "Recover Accidentally Deleted Files". If there is a write operation on the partition where the file is located after the file is deleted, it is better to check the "Additional scan for known file types" option and click the "Select File Type" button to set the file types to be recovered. Tap the "Start" button to start the search process:

3. After the search is completed, the Recover Files dialog box will be closed automatically. The main interface of the program will show you the searched files, each deleted file with a checkbox in front of it, and the entries in the folder hierarchy chart on the left will also have a checkbox. See diagram below.

4. Check the files you want to recover, right-click "Copy to" and select a directory to copy the files.

Wait for the copy to complete to recover the files.

If this is the case, you have to stop writing data to this hard disk, otherwise it will be very bad to overwrite the previous data, and you can use it in the recovery work laterPowerful data recovery software

It doesn't matter if it's on another computer, recovery is sure to recover.

However, whether other data has been written after the data has been deleted, and how much has been written, determines how much can be recovered.

If the data is important, it will be sent to a professional company for processing. General data, you can recover it yourself with easyrecovery, diskgenius, etc. However, don't expect to recover the directory, it's a messy pile of files that you need to open and check one by one and re-establish the directory table.

Yes, you need to use recovery software. Jinshan seems to have that function.

OK. Hook it to another computer as a slave disk, and scan it with finaldata to recover.

Hello, under normal circumstances, if you have not deleted or written any data after deleting, the data recovery software may still be able to do it, but once you have done the above operations, there is no way to recover it, and you can only hand it over to professional data recovery. Be careful in the future, after all, hard drives have a price, but data is priceless!