My Apple Six has been white, and Apple Infinite restarts occasionally have a red screen

If you have fallen, you will give it to me, it will all be broken.

There are two major possibilities: one is a system problem, and the other is a hardware problem.

1. Software problems: It may be that the system is accidentally exited during the upgrade, resulting in white apples. You can try the following.

When the white apple appears, the sock stool, press and hold the switch + home button, let go of the black screen, and then press power to turn it on, and then wait, at this time it is still a white apple. Then press the volume to add and subtract, you can click twice, and then long press the two together, note, it's still a white apple. Then press and hold the switch + home button again, let go of the black screen, and then press power to turn on, this time don't press the volume plus or minus again, if the above steps are not wrong, it should be able to turn on normally.

If the above method still does not solve the problem after testing, then you can try to reflash the system by connecting the computer to iTunes and restore the settings.

2. Hardware problems: The white screen situation refers to whether it has been dropped or flooded, and it depends on what causes the white screen to be caused by a broken screen, a cable, an IC and a motherboard. If the battery is damaged, it may cause repeated reboots.

Open the settings, find the battery, and then select the battery health, you can see the maximum capacity percentage of the battery displayed, if the battery is lower than 80%, you can consider replacing the battery. In the end, the problem still can't be solved, you can bring your purchase invoice to Apple after-sales for testing.

Let's see if we can use software like AISS Assistant to reflash the firmware.

In your case, it should be a problem with the mobile phone, it is recommended to contact the after-sales service to see whether it is a new machine or a factory for maintenance.

The appearance of a white apple and a red screen is generally like the following situation:

Mobile phone, battery replacement.

Before proceeding with the battery replacement process, follow these steps to prepare your iPhone 6S

Back up your data to iTunes or iCloud Turn off Find My iPhone

In Settings> General> Reset> Erase All Content and Settings, erase data and settings.

Note: If your iPhone 6S has any damage that prevents a battery replacement, such as a cracked screen, you'll need to fix that part of the issue before you can replace the battery. Repair costs may be incurred in some cases.

If the screen color of the mobile phone is abnormal, such as black screen, white screen, white screen, red screen, etc., ask the question

Question, Suggestion:

1.It is recommended to restart the mobile version.

In your case, it should be a problem with the phone, it is recommended to contact the after-sales service to see whether it is a new machine or a factory repair.

The appearance of white apples and red screens is generally like the following situation:

Mobile phone, battery replacement.

Before proceeding with the battery replacement process, follow these steps to prepare your iPhone 6S

Back up your data to iTunes or iCloud Turn off Find My iPhone

In Settings> General> Reset> Erase All Content and Settings, erase data and settings.

Note: If your iPhone 6S has any damage that prevents a battery replacement, such as a cracked screen, you'll need to fix that part of the issue before you can replace the battery. Repair costs may be incurred in some cases.

iPhone6 Plus White Apple Solution:

1. In white. Apple,Press and hold the switch + home button,Let go of the black screen,Press power to boot again,Wait a minute,At this time, it's still a white apple,Then press the volume plus and minus,You can click on two,Then two long press together,Note,It's still a white apple,Then press and hold the switch + home button again,The black screen will let go,Press power again,Don't press the volume plus or minus again this time to go in,If there is no mistake in the above,It should be able to turn on normally,I personally tested,It's no problem to restart again。

Try. Three or four times, sometimes the reboot will be white, at this time press and hold the power + home, let go of the black screen, and then turn on the machine normally.

After that, I restarted continuously and it started normally.

2. If it's white, press the power and home together, wait for the black screen, immediately press and hold the power and volume buttons, see the white apple, and then wait for the screen to go black, and finally press the power button or connect the data cable (the data cable is connected to the computer) After seeing the white apple that starts again, you can enter the system, and then uninstall the last installed cydia plug-in after entering, and then restart it will not be white.

One, the reason for the infinite reboot of iPhone5s is generally caused by the conflict between the software and the system.

Second, the fault handling method:

1. You can try to press the "Power + Home Screen" button at the same time to force the iPhone to restart to see if it can return to normal If it returns to normal, it is recommended to uninstall and delete the software that causes the conflict.

2. If iTunes still prompts that an iPhone in recovery mode is detected after force restarting, then the only way to restore the firmware system is through iTunes on the computer.

3. Specific operation methods:

1) Connect your iPad to your computer and turn it off.

2) Press and hold the power on button and the home button at the same time.

3) When you see the white Apple logo, release the power on and off button and keep holding the home button.

4) Open iTunes and wait for it to prompt you to resume mode, then press and hold the shift key on your keyboard, click "Restore", and select the corresponding firmware to recover.

Solve iPhone 7 suddenly black screen reboot with white apple and automatically repeat the specific operation is as follows:

1.When the white apple is displayed on your phone screen all the time, please press the "Power and Home Screen" button at the same time, keep it for more than 10 seconds, and force restart the phone;

2.See if the phone can be back to normal. If the white apples are still displayed on the screen, then read on;

3.The above method has been tried, and if it can't be restored to normal, it means that the current mobile phone system has completely collapsed, and the only way to recover is to do so. Since the white apple icon is displayed on the screen at this time, you need to press the "Home + Power" button on the main screen at the same time until the screen goes black.

5.After following the above method, the Apple iPhone should be turned off at this time. Then follow the steps below:

1) Press and hold the power button to turn on the power first, then the Apple logo will appear on the screen, do not release the power button;

2) Then press and hold the home button on the home screen until the screen goes black.

3) When the screen is black, please release the power button, and do not release the home button on the home screen until iTunes on the computer side detects an iPhone in recovery mode;

6.Subsequently, please click the "Restore iPhone" button in the iTunes window;

7.Then wait for iTunes to connect to the network to detect the latest system for your phone and prompt me if I want to restore it.

The solution to the black screen bai of the iphone:

If you enter the dudfu mode, you can exit according to the exit method of the zhidfu mode.

If the screen is normally black, try to connect the phone to the computer and answer iTunes or press and hold the power button until it can turn on.

If you accidentally press the recovery mode and cause a black screen, press and hold the home button and the power button together, press and hold together for about 15 seconds and let go, and then press the power button to recover.

The black screen is basically a software problem, the power button + home button at the same time press and hold for 10 seconds to see if the above method does not work, it is recommended to bring your mobile phone to the regular Apple customer service center for inspection and maintenance.

1. The leakage of the main copy board of the mobile phone causes the use of excessive current.

2. The protection circuit in the lithium battery is overly sensitive, so the current will be cut off when the current is large.

3. The battery itself has aged.

4. There is dirt on the metal sheet in the contact position of the battery, which causes poor contact with the power supply.

5. The joint between the battery and the mobile phone is easy to loosen.