Where are the toilet vents and what can the toilet vents do?

If the toilet vent is blocked, you must find the reason, or you know where to start, for example, your toilet is a siphon type, then it is better, but you must know that the leaking hole in the inner wall cannot be sealed.

Do the math how much it will cost you to renovate your home

It is an important part of siphon siphon and is indispensable. The siphon type is divided into vortex siphon and jet siphon. There is a complete pipe in the siphon toilet, the shape is a side-down "S", the slope of the pool wall is gentle, and the noise problem has been improved; It has the characteristics of strong sewage discharge capacity and large clean surface, so the vast majority of toilets, especially the conjoined ones, are siphon type.

The biggest advantage is that the flushing noise is low, which is called silence. It is easy to flush off dirt that adheres to the surface of the toilet. No matter what kind of toilet you have, the first thing to depend on is the pipe that goes down, if the pipe has a U-shaped trap, you can choose the straight flush type, if there is no trap, you can choose the siphon type.

The flushing principle of toilets on the market is basically two categories: straight flush type and siphon type. The siphon type is divided into vortex siphon and front jet siphon. Both toilets have different benefits, and each has different characteristics that you can choose according to your own preferences.

When you choose, you not only want the toilet to look good, but also pay attention to some details, or it will be very inconvenient to use.

Enter the area and get the decoration for free**].

The two holes, one is the sewage outlet and the other is the reserved sewage outlet, which refers to the pit distance. And the exhaust hole is generally on the top, not below. The pit distance is divided into 30 cm and 40 cm, if the distance between the sewage outlet and the corner of the wall is 30 cm, then you must choose 30 cm of the false burning hole, which is the hole behind the toilet.

If it is 40 cm, you should choose the hole with the old face in front of the air. The hole is not one-piece, except that it is sealed with special mud and has a plastic lid underneath that, with a few taps, it will fall off.

Siphon toilets do not have vents.

The vent is not related to the toilet. It is connected to the unit sewage main, which leads directly to the vent of the roof. Only when the vent is present can the dirt be discharged smoothly downward.

The return air hole is on the side of the sewer pipe, with a diameter of about 2cm, and the direction is generally opposite to the direction of the water going from the sewer pipe. Only with air return holes can the toilet pump to form a whirlpool, and the dirt in the toilet can be pumped into the sewer pipe, and once blocked, it will also cause the toilet pumping function to fail.

If the air return hole cannot be used normally, then the toilet cannot be used normally, because its odor cannot be discharged at all, then the whole bathroom is very smelly.

The siphon toilet is blocked, and it has nothing to do with the air vent. Legend has it that the vent is just a process hole, which is only used in production. The finished product stage is generally blocked.

Even if it is not blocked, there will be no water leakage. The vents are generally found in the following places: the front part of the toilet is on the ground at the bottom of the curve, or the back part is on the ground.

Rare elsewhere. Generally, when the toilet is blocked, it is good to use a leather plug to suck it or use a metal wire to pass it.

Hello, these two flush toilets have their own pros and cons, the water-saving effect of the flush toilet is better than that of the siphon toilet, but the noise is relatively loud (when flushing), the siphon toilet uses more water, but the silent effect is good, and it is also better than the flush toilet in terms of sewage and odor prevention. It is recommended that the landlord buy a siphon toilet better.

Sorry, I can't get on the picture! The air return hole is the "big hole" in the toilet, and there is a hole at the bottom, which is the air return hole!

The return air hole of the toilet is on the side of the sewer pipe, with a diameter of about 2cm, and the direction is generally opposite to the direction of the water going from the sewer pipe. Only with air return holes can the toilet pump to form a vortex to pump the dirt in the toilet into the sewer pipe, and once blocked, it will also cause the toilet pumping function to fail.

When blocked, immediately remove it with a skin suction device, in order to prevent damage and water leakage, do not hit the ceramic, avoid hitting the cover plate and seat ring violently, do not clean with a steel brush and a strong organic solution, so as not to damage the glaze of the product and corrode the pipeline.

To keep the surface of the toilet clean and flushing properly, clean the pipes and flush holes with a nylon brush with a long handle and soapy water or mild detergent, and it is recommended to clean them at least once a week.

The vent is where the picture goes. If the toilet is used for a long time, there will be water alkali blockage, so you can know by touching it with your hands. The return air hole is blocked, and even if the sewer pipe is not blocked, the toilet drains very slowly, and there is no rattle.

The common way is to take a screwdriver and poke it in. Generally fine. The effect of dredged air return hole is very good.

Toilet vents are usually located underneath the toilet bowl and are used to drain waste water and dirt from sewer pipes and sewers. The purpose of this vent is to enable the toilet bowl to be flushed before the waste water is soaked in the pool, and to create a vacuum suction force after the bath to ensure that the waste water and sewage can be discharged quickly.

The exhaust hole is composed of two parts: a pipe and an air valve. The vent holes on the pipes are specially designed to help you control the flushing rate of the toilet bowl while also getting better cleaning results. The vent hole passes through the vacuum suction in the air valve and is forced to operate in a backstop mode before sucking the water from the bottom into the drain pipe, thus maintaining positive pressure inside the pipe to ensure the smooth discharge of the sewage.

The vent hole is located under the toilet bowl and is determined by the workers in the process of processing and installing the overhaul. As a result, their location may vary from manufacturer to manufacturer. However, you can usually find it by taking a closer look at the design of the bottom of the toilet.

It may seem like a no-brainer, but if you're not sure where the vents are located, the process can get quite tricky and can lead to incorrect installation and operation. The best way to avoid this is to check the installation guide, or consult a professional.

In general, the toilet vent is underneath the toilet bowl and plays a very important role. When cleaning and maintaining the toilet, the vent hole also needs to be paid special attention. If you have no experience with toilet installation and maintenance, it is important to seek the help of a professional to ensure the safety and long-term use of your toilet.

1. Next, measure the size of the toilet, first measure the distance from the front end of the toilet to the center of the sewer nozzle, and then measure the distance between the two ends of the toilet with a ruler.

2. After this is included, mark the part just measured on the sewage outlet, so that the position of the toilet installation can be accurate, and then mark the sewage outlet with a cross.

3. Attach the sealing ring attached to the toilet bowl to the drain of the toilet, and pay attention to the fit.

4. Then press hard several times until it is installed tightly.