What should I do if my mate 30 falls into the washing machine and soaks in water? Can it still be us

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after the liquid is ingested to avoid moisture spreading inside the phone.

2.Do not blow with a hair dryer or bake at high temperatures (including microwave heating) after liquid infusion, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after liquid ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

If the mobile phone falls into the water and takes it out, there is no problem if the time is very short, because there are mobile phones with waterproof function, if they are soaked in water for a period of time, they must be sent to a professional place for repairing the mobile phone, so that a professional person can dry or repair the mobile phone.

Don't turn on the machine after taking it out of the water, be sure to dry the water before turning it on, you can use a hair dryer to dry, or you can put it under a fluorescent lamp or put it in the sun to dry.

Mitsubishi fell into the washing machine and was soaked in water, don't remember not to turn it on, replace it with a fried mini, cool it for seven days, and try to turn it on.

First of all, you can't turn on the phone in a hurry to check, your best way is to take your mobile phone directly to the mobile phone after-sales inspection and repair, don't turn it on, otherwise it will be short-circuited even if it is not broken.

Take it out as soon as you find it, and if the time is short, there is still a possibility of recovery. Take it out and wipe the outside water first, don't turn it on, and then slowly wait for the water inside to dry out. If the water is too long, it may not be used.

It is best to go to the after-sales service to check it, if the time is too long, the possibility of bad is relatively large.

It's best not to turn on the machine first, use a hair dryer to dry the water first, and it's best to take it to the customer service center for a professional to test it!

If your Huawei phone has fallen into the washing machine and is soaking in water, it is recommended to take the following steps immediately:

Immediate power off: As soon as you remove your phone from the water, turn it off. This is to avoid problems such as short circuits or damage to the circuit.

Remove the battery and SIM card: Remove the battery and SIM card and wipe them clean with a dry cloth. Do not use a slag hair dryer or other heating device to dry the battery or phone, as overheating may cause damage to the battery and electronic components.

Crack your phone into a rice bag or dust desiccant: Put your phone into a hygroscopic object, such as a rice bag, desiccant, or a dry, unused tea bag. These items can absorb moisture and help your phone dry out.

Don't rush to turn it on: Although you may be anxious to know if your phone is still working, it's best not to try to turn it on until it's completely dry. You should wait at least 24 hours before turning on your phone to make sure your phone is completely dry.

After the mobile phone is injected, there may be abnormal function, in order to reduce the loss, it is recommended to deal with it as follows:

1.If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

2.Remove the SIM card and memory card.

3.Try to place your phone in a dry and ventilated place, and use a paper towel to blot the liquid on the surface of your phone.

4.Take your phone to a nearby Huawei customer service center for maintenance as soon as possible to avoid unnecessary losses. If you don't have a backup of your data, there may be a risk of data loss when repairing.

Notes:1Do not move or shake your phone frequently after the liquid is ingested to avoid the spread of liquid inside the phone.

2.Mobile phones are made of delicate electronic components, and there is a hidden risk after liquid ingress, so it is recommended not to try to turn them on.

3.Do not blow with a hair dryer or bake at high temperature after liquid intake, so as to avoid the liquid being blown into the inside of the phone and the high temperature damaging the phone.

The mobile phone fell into the water, and it can be used if it has been soaked for a long time, but you must not be in a hurry to turn it on, you will send him directly to the mobile phone store to repair it and tell him that he will repair and dry it for you if it falls into the water, and if you turn it on, it is easy to cause a short circuit in the mobile phone, and then it will burn out some electronic components, so the maintenance cost will be higher.

This is something that needs to be disassembled and detected to make a decision, and it can't be made outside.

If it's not a waterproof phone.

Drop into the water and soak.

It is basically unusable.

You can get the mobile phone to take a look after the sale.

If the Huawei mobile phone falls into the water, it will be taken out and shut down immediately, and it will be repaired and processed immediately.

Hello, the mobile phone soaked into the washing machine, this is very uncomfortable, because the washing machine is all full of water, this can only be directly taken to the nearest maintenance point to disassemble the machine, and then go to the water treatment, the best state, is that the original hardware is not damaged, so after drying, there is not much damage, if the hardware inside has been damaged it needs to be replaced, and the specific need to be detected to know.

1. Salvage mobile phones.

2. Take out the battery directly (idea, don't turn off or click any mobile phone keyboard button, otherwise, it is very easy to cause a short circuit and damage the motherboard circuit, then you can only change the motherboard, then the loss will be great).

3. Use a dry cloth or dry paper towel to absorb the surface moisture.

4. Dry with a hair dryer (if possible, it is best to clean with an ultrasonic cleaner before drying with a hair dryer.) In addition, liquid crystals are not resistant to high temperatures, so be very careful when drying them on a hair dryer.

5. In addition, the melting point of soldering on the mobile phone circuit board is very low, and the plastic shell is easy to deform, so the temperature should not be adjusted too high when the hair dryer is drying.

6. If it falls in the sewage and there is no ultrasonic cleaning machine to clean, it is recommended to go to the street mobile phone repair point (generally 20 30 yuan) to clean and blow dry to prevent the motherboard from slowly clearing turbidity and eventually leading to the scrapping of the motherboard (this kind of trivial thing does not need to go to the mobile phone brand store, where it is not only expensive but also more hateful is that your mobile phone repair is recorded in the file, you may lose the remaining warranty, go to the street mobile phone repair point to repair your optimism, to prevent profiteers from subcontracting parts).

Question: What should I do if there are water droplets in the photo hole?

This needs to be sent to the after-sales inspection. You can't see it by the appearance alone.

The mobile phone fell into the water, and it can be used if it has been soaked for a long time, but you must not be in a hurry to turn it on, you will send him directly to the mobile phone store to repair it and tell him that he will repair and dry it for you if it falls into the water, and if you turn it on, it is easy to cause a short circuit in the mobile phone, and then it will burn out some electronic components, so the maintenance cost will be higher.

Can I still use my phone if I drop it in the sea? Seeing this question, I couldn't help but answer. Last year I dropped a phone and went to sea. It's not just one phone that has been dropped. A lot of important information is missing. However, this experience has taught me that nothing is to be lost.

If the mobile phone falls into the sea, the chance of being able to pick it up first is relatively small. If you can pick it up, go to the after-sales inspection and maintenance to use it more reliably. Because the seawater has a large proportion of salt. Prolonged soaking of salt on the phone can lead to damage to the components.

In fact, you should not believe some methods on the Internet, such as dropping your mobile phone into the water and putting it in the rice to let the water evaporate. Or use a hair dryer to dry it. Or sun-dried, air-dried, these are not very reliable.

In order to guarantee the longevity and safety of the phone. It is recommended that the mobile phone fall into the water or go to the after-sales service.

In addition, more and more mobile phones can have IPX2 waterproof level, which can cope with daily life sweat and short-term light rain. However, it is not possible to cope with the situation where the mobile phone falls into the basin or pool of water and is completely immersed in water.

What should I do if my phone falls into the water?

In general, electronic products are afraid of water, and it is very bad to get into the water. But there are still many friends who accidentally let the mobile phone into the water, is the mobile phone in the water and it is not saved? Actually, no, as long as you take first aid, there is still a way to recover.

Next, let's take a look at whether using a hair dryer can save the phone from entering the water.

1. First of all, save your mobile phone from the water as soon as possible, wipe the surface water, remember not to shake the phone, don't think about shaking it, shake off the water, you must know that in fact, there is an air barrier in the small gap in the mobile phone, and it will not enter the water when it falls into the water at a simple time. If you shake it, it's good, it's all water, it's transparent. All, the first step, take it out, wipe it dry, and cannot shake it off.

2. Next, quickly turn on your phone, take out the battery, card, etc., and then wipe off the surface one by one. It is still necessary to remind you not to shake and blow, and it will be difficult to get water in the place where there is no water. After wiping dry, let it dry slightly.

Then it's time to prepare for the final step.

3. Take out the dried rice at home, put the battery, mobile phone and other key parts into the rice, and use the powerful water absorption function of the rice to save your mobile phone. After a day, you can take it out, it's basically dry, and there are no problems. Of course, depending on the degree of water ingress on your phone, if it is very wet, you can change some dry rice and repeat for a while.

One thing to note here is to prevent small, broken rice from entering the inside of the mobile phone, and it will be more troublesome at that time.

4. Many people will use a hair dryer to blow in this step, in fact, the hair dryer is not very good, and the risk is actually the same as the aforementioned throwing of the mobile phone and blowing, which is easy to lead to water in the place where there is no water. If you use hot air, it is easy to damage the screen of the mobile phone, which will seriously lead to deformation, and may not be able to display and the sequelae of water lines.

The above is the introduction of what to do if your phone falls into the water, I hope it will help you!

Put the phoneDemolished,Take a dry clothWipe it offmotherboard, untilNopewater, thenTurn it on again

Can you still use the master who needs to be repaired to disassemble the machine and check it.

3 Situations in which the Phone Falls in Water:

1. Drop into clean water when the power is on;

2. In the case of power failure, it falls into non-corrosive liquid;

3. Fall into non-clean water when energized, or corrosive liquid or viscous liquid or other unclean liquid regardless of whether it is energized or not.

What do we do when we drop our phone in the water?

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1.Turn off the power as soon as possible.

2.Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3.Put it under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not rush to use strong heat sources such as hair dryers. Blow it and it's over.

After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure.

1.Shake it dry, but don't shake it off.

2.If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

3.If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

If you have poor hands-on ability, you should still repair it for a professional).

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

1.Turn off the power as soon as possible.

2.If you fall into a corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3.Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4.Rinse with alcohol or professional washing water.

5.Assembling. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.