How high is the switch socket on a bedside table?

The height is higher than the bedside table and lower than the bedside, and the height of the bedside table is generally 55-58cm, so the socket position is set between 70-80cm, which is 10cm higher than the bedside table.

If it is a switch of the lamp, of course, it is better to separate it from the socket, the switch position of the lamp is 1 meter, and the socket is 30 cm above the ground, so as to install it 5 to 10 cm above the bedside table, so that the wall is inside, and the socket with a safety switch is made, so that it is safer.

The installation dimensions are as follows:

1. Dual control of the bedside, on the bedside table, the face is off the ground, and the socket is 700mm-800mm.

2. Air conditioner hang-up socket 1800-2000mm.

3. The socket under the TV cabinet is 300mmThe socket above the TV cabinet is 600mmThen hang the socket of the TV ** 1100mm.

4. The socket on the computer and other desktops is 1100mm.

Standard dimensions for the height of the bedside table socket: 70 to 80 cm.

The standard height of the socket on the bedside table is between 70-80 cm. The bedside table should be higher than the bedside table, and the height of the bedside table is generally 55-58cm, so the socket position should be 10cm higher than the bedside table.

The height of the switch must be higher than the height of the bedside table. Since some bedside tables are currently more than 70 cm high, which is significantly higher than the current switch height, if they are not renovated, the bedside tables will not be able to be placed against the wall in the future.

The location of the socket is set at a height of more than one metre above the bedside table. If it is a switch of the lamp, of course, it should be separated from the socket, the switch position of the lamp is about about a meter, the socket is about a meter from the ground, installed above the bedside table to the meter, and done in the wall, and at the same time is a socket with a safety switch. In general, the standard for the height of the bedside table socket is meters.

In the bedroom, the combined power socket should be used reasonably to meet the daily use. Bedside socket areas and numbers are taken into account. The plug is 30cm from the ground, installed 5-10cm above the bedside table, and Shili does it inside the wall to make a socket with a safety switch.

Precautions for the installation of bedside table sockets.

The socket wire installation should adopt the cross-section of copper wire, and follow the principle of "live wire into the switch, zero wire into the lamp head", and the leakage protection device needs to be designed on the socket.

The position of the socket should not be too low, the normal open-mounted socket is not lower than the ground, the concealed installation is not lower than the ground, the kitchen and bathroom socket should be above, and the air conditioning socket should be at least 2m or more.

Air conditioners, refrigerators, range hoods and other electrical appliances have relatively large power, and independent sockets should be used, and they should not be overloaded, otherwise they are easy to cause disasters. And it is necessary to connect the ground wire, otherwise it is easy to be virtual, otherwise once the electricity leaks, it will lead to the danger of electric shock. Set up a few more circuits to avoid short-circuiting and paralysis of electricity in the whole room.

For example, the kitchen and bathroom belong to wet areas, and it is recommended to install splash-proof water boxes or plastic baffles for sockets in such areas to avoid oil and water vapor from entering, resulting in short circuits. For families with children, it is best to choose a safety socket with a safety flap that prevents children from touching it with their fingers or poking the socket hole with metal objects.

In order to avoid the socket being blocked by the bedside table and causing it to be unusable, then we must pay attention to the installation height of the socket, so what is the height standard of the bedside table socket? Let's take a look.

1. What is the height standard of the bedside table socket?

1. When installing the bedside table socket, be sure to make the height of the socket higher than the height of the bedside table, so as to avoid the socket being blocked by the bedside table, resulting in the socket being unusable. In general, the hypertonic degree of the bedside table is about 55 cm to 58 cm, and the height of the socket should generally be about 15 cm to 20 cm higher than the bedside table. Therefore, the standard height of the bedside table socket should be between 70 cm and 80 cm.

2. If the bedside table is still a certain distance from the wall, the height of the socket can also be lower than the height of the bedside table, that is to say, the socket is installed behind the bedside table, which can make the bedside table more tidy. When installing the bedside table socket, the socket panel must be installed close to the wall, and must be connected according to the wiring principle to avoid the wrong line connection, resulting in the socket being unusable.

2. What should be paid attention to when installing indoor sockets.

1. Security issues.

When installing indoor sockets, you should choose to install a safety socket with a safety baffle, which can avoid children touching with their fingers or using metal objects to poke the socket holes, resulting in electric shock accidents. Since there is often fumes or water in the kitchen, a splash box or plastic baffle should be installed on the socket.

2. Height problem.

When installing an indoor socket, you should check the installation height of the socket. In general, surface-mounted sockets should be installed above meters, and concealed sockets should be installed above meters. And the sockets in the kitchen and bathroom should be installed more than a meter.

The above is all about what is the height standard of the bedside table socket and what should be paid attention to when installing indoor sockets, I hope it will be helpful to everyone. There are requirements for the installation of the height of the socket of the bed liquid head table, for the convenience of daily use, it is best to install the socket on the top of the bed side table.

As we all know, switches play a vital role in home renovation. Because with the switch, it can not only bring a lot of convenience to the owners, but also make the electrical appliances play their own role. So, what is the installation height of the bedside table switch?

What should I pay attention to when installing the switch? Let's find out together!

1. What is the installation height of the bedside table switch?

The height of the bedside table switch is between 70 and 80 centimeters. Because the position of the switch is higher than the bedside table and lower than the head of the bed, and the height of the bedside table is generally controlled between 55 cm and 58 cm, the position of the socket only needs to be 10 cm higher than the bedside table.

2. What should I pay attention to when installing the switch?

1. Select according to the region.

In fact, the switch in each area is different, for example, the bathroom is a wet place, so when the installer takes it, he must buy a waterproof cover, so as to avoid the entry of water vapor, which will lead to a short circuit.

2. Habits. The location of the switch is best decided according to the living habits of yourself and your family. For example, most people use their right hand when washing their hands, and they will also separate to the right when entering the door, so the position of the switch is best installed on the left side of the door.

If your living room is larger and rental, then you can install a dual control switch, which will be much more convenient.

3. The spacing between the switches of the TV wall.

If the length of the TV wall is more than 3.6 meters, then it is better to install more sockets. For walls of less than 3.6 meters, the socket can be set in the middle. If possible, it is best to install a five-prong socket.

Since the socket and the TV outlet are close to each other, it is best to keep the interval above 0.5 meters.

Summary: The above introduced to you what is the installation height of the bedside table switch and what should be paid attention to when installing the switch, I hope to give you some small help. If you want to explore more content related to this, you can continue to lock down our **.

Bedside table socket height: between 70-80cm.

Higher than the bedside table, lower than the bedside, the bedside table height is generally 55-58, so the socket position is set at 10cm higher than the bedside table, if it is a lamp switch, of course, and the socket is separated, the switch position of the lamp is 1 meter, the socket is 30 cm above the ground, so as to be installed 5 to 10 cm above the bedside table, so that the wall is inside, do the socket with a safety switch, so that it is safer.

Many families in the installation of sockets, think that too high to hinder the elegance, will be installed in a lower hidden position, industry rules, the surface socket from the air is best not less than meters; The socket of concealed installation should not be less than one meter from the air, the socket of the kitchen and bathroom should be more than one meter from the air, and the socket of the air conditioner should be at least 2 meters or more.

The socket of the bedside table should be 15-20 cm above the bedside table. If the bedside table can be a certain distance from the wall, it can also be lower than the bedside table, that is, placed behind the bedside table, so that the good treatment can avoid many lines can be more tidy.

The height of the general wall socket is in meters, and the old-fashioned bedside table is generally in meters.

It needs to be matched with the bedside table, depending on the height of the bedside table, which is generally 40-50 cm.

The height of the bedside table socket is 300mm from ground level.

The height of the bedside socket and switch should be between 700mm-900mm. It is more convenient to use, the switch should be near the bed, and the home decoration should be designed by a professional designer, otherwise there will be a big remaining problem. It's something you can't think of yourself.

50cm bedside table sockets are generally placed at a 70cm position.

Generally speaking, there are no special requirements for the installation height of the bedside table socket, but in order to make it more convenient to use the bedside table, it is recommended that you try to increase the height a little when installing, and it is best not to lower than the meter, so that you can use the bedside table more safely and securely. If it is installed in a humid environment, it is best to buy a waterproof socket so that the socket will not be short-circuited due to water ingress into the socket. When installing the bedside table socket, the panel and the wall must be close together, and you should also pay attention to the connection line to not connect the wrong one.

Depending on the position and height of your bed.

Don't get caught in the bed.

Make it convenient for you.

Determine the position of the bed and the bedside table first, then the height of the bed, then the height of the bedside table.

Height of sockets and switches: Must be higher than the height of the bedside table. (Because some bedside tables are now more than 70 cm high, which is significantly higher than the current height of switches and sockets, if not changed, bedside tables will not be able to be placed against the wall in the future).

The left and right position of the switch is very related to the arrangement of the bed, and if it is installed too in the middle, the switch may be just behind the back of the bed, so this is also very important.

The location of the socket: Compared with the switch, the position of the socket is not too big a problem, but if the position of the socket is lower than the bedside table and just blocked by the bedside table, then it will be very inconvenient to use.

So the best design is to measure according to your own situation.

The height of the bedside table socket can be designed according to the convenience of your own use.

1. The distance from the left and right sides of the bed is about 20cm;

2. About 55-65cm from the ground;

3. Two sockets are designed side by side on each side.

It is recommended to find a professional master to tailor it.

What is the appropriate distance from the bedside socket switch in the bedroom?

According to the height of your bedside table, you should also consider the width of your bed.

The socket alone should be 30 cm above the ground. Switch with socket, 120 cm above the ground. The bedside table should be 30 cm above the ground.