The computer is turned on for a while, the mouse does not move, and it is good to restart

Updated on number 2024-03-27
5 answers
  1. Anonymous users2024-02-07

    If it turns off automatically when you open something with the mouse, then it may be a mouse problem. For example, some time ago, my machine has been used normally, but one day after turning on, when I was about to watch VCD, the computer suddenly shut down automatically, and then I tried again several times, and each time I opened it with the mouse"My computer"When the machine is abnormally powered off and shut down, the safety mode is no exception.

    After analysis, it is felt that the possibility of power failure is very high, and some inferior power supplies are easy to lose power due to the sudden increase in current at the moment when the optical drive starts. So I replaced it with a good Great Wall power supply, but the phenomenon is the same. Then I changed the graphics card, CPU, motherboard, etc., but it couldn't solve the problem.

    used "Jinshan Poison Tyrant" to check the virus, and no virus was found. After turning on the computer, I carefully observed, and found that as long as I didn't move the mouse after entering the system, there was no problem, but as long as I moved the mouse, the computer would shut down, and I immediately took a new mouse and replaced it, and it ran on and on, and everything was normal.

    Upon closer inspection of the mouse, it turned out that the insulation of several thin wires in the mouse had been severely damaged, revealing the wires wrapped in them, and some parts were entangled, and it was estimated that the cause of this strange failure was caused by their short circuit. Sort out several thin wires separately, glue them with insulating tape, and then troubleshoot.

    If it is a mouse that automatically restarts, it may also be a mouse problem, and the solution is the same as above.

  2. Anonymous users2024-02-06

    Categories: Electrobi Brain Network >> Hardware.

    Problem description: Play well, suddenly the host rings a few times, and then the mouse doesn't move, the line is not loose at that time, I can't unplug it and plug it in, but after restarting the host, it's okay, what's going on?

    Analysis: This is a problem with the driver of the mouse Menghui cavity standard, which may conflict with the system or other hardware, it is recommended to ** a mouse manufacturer's dedicated driver, which may have fewer conflicts.

  3. Anonymous users2024-02-05

    Summary. The computer has been restarting frequently, and after restarting, the mouse can't move and reboot again, it may be the system instability caused by system file corruption, and it may be caused by your hardware. Memory, voltage, etc.

    If it's a software cause, you can fix it with a 360 first aid kit. I hope it can help you. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress.

    Finally, I wish you good health and a good mood!

    The computer has been restarting frequently, and after restarting, the mouse can't move and restarts again.

    The computer has been restarting frequently, and after restarting, the mouse can't move and reboot again, it may be the system instability caused by system file corruption, and it may be caused by your hardware. Memory, voltage, etc. If it's a software cause, you can fix it with a 360 first aid kit.

    I hope it can help you. If my staring macro answer is helpful to you, please also give a thumbs up (in the lower left corner of the evaluation of the price), looking forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. Finally, I wish you good health and a happy mood!

    I seem to have uninstalled one yesterday.,It's called win32 qihoo360.,But I can't get into the desktop right now.。

    Hello dear,This situation should be that you uninstall the Nawu Zen sound card driver,It is recommended that you open the hardware master in the 360 full guard function encyclopedia and use it to reinstall the sound card driver should be able to solve the ant track。 , I hope it can help you.

    It's not a sound card, it's not going to get into the desktop.

    Hello dear, change the killing software, change the antivirus software, and try to slow down the blind army. In addition, it is suspected that it is not a problem with the virus, such as disturbing or if it is assembled by itself is not a god brigade that is not a mismatch in hardware. I hope it can help you.

  4. Anonymous users2024-02-04

    It is recommended to reinstall the system, but first change the mouse to rule it out.

  5. Anonymous users2024-02-03

    First, in this case, the general failure of the optical mouse mainly includes:

    1. The mouse button is out of order, the mouse cannot be found, the sensitivity becomes poor, the mouse positioning is inaccurate or the phenomenon of drifting often occurs for no reason.

    2. More than 90% of the faults of the photoelectric mouse are broken wires, poor key contact, and dirty optical system, but there are also cases of virtual welding and damage to the original.

    Second, the system could not find the diagnostic method of the mouse

    1. The main reasons why the system cannot find the mouse are the damage of the mouse, the poor contact between the mouse and the host, the damage of the mouse interface on the motherboard, and the damage of the mouse driver.

    2. The system can't find the mouse troubleshooting method is as follows, first enter the safe mode, and then restart the computer or repair the mouse driver by restoring the registry.

    3. If the problem is not solved, it may be poor contact or hardware damage, and the mouse can be connected to another computer for testing. Generally, the mouse can be replaced directly if the mouse is damaged.

Related questions
7 answers2024-03-27

If the Samsung phone frequently restarts automatically and the machine cannot be used normally, it may be a problem with the phone's system or hardware >>>More

8 answers2024-03-27

Someone else's answer! Hope it works for you!!

According to the preliminary status quo to judge 1, if there is an alarm sound, according to the alarm sound to judge the relevant problems 2, if there is no alarm sound, you can start normally, but after booting a certain software to run this kind of problem, you can uninstall the software and reinstall, if it still doesn't work, you can upgrade the graphics card driver, if it still doesn't work, you can try to reinstall the system. 3. If it can be turned on normally, the screen will be white as soon as it is turned on. If this is still the case, you can reinstall the system, if there is still such a problem after reinstalling the system, wipe the gold finger of the graphics card (the gold part below the graphics card), slots, etc. with alcohol and then try, if not, find after-sales testing and wish you to solve your problem as soon as possible. >>>More

2 answers2024-03-27

Generally speaking, there are four things that can cause the blue screen error. >>>More

9 answers2024-03-27

The heating of the mobile phone is mainly caused by the high load of the processor. Theoretically, if the heat cannot be discharged in time, it will cause some damage to the mobile phone processor, which is of course a safety hazard and we have to prevent it. So how can this phenomenon be prevented? >>>More

6 answers2024-03-27

The gas water heater will automatically turn off the power after a while, and the reasons are as follows: >>>More