How to remove the Senova D50 reversing lens

To remove the Senova D50 reversing lens, you need to prepare a flathead screwdriver.

That's it, the specific disassembly method is as follows:

1. First of all, adjust the reversing lens of the Senova D50 vehicle down to the limit position, and you can see the lens and driver at this time.

When the snap-in position is reached, insert the screwdriver into the snap-in position of the cutter.

2. Next, you only need to pry it back gently, and then the reversing lens of the Senova D50 vehicle will be separated from the driver.

3. At this time, you will see a wiring harness plug of the Senova D50 reversing lens, and you only need to pull out this wiring harness plug.

4. In the end, the reversing lens of the BAIC Shenbao D50 vehicle was completely disassembled.

<><4. Then select the vehicle settings on the display screen of the BAIC Shenbao D50 car, as shown in the missing state diagram.

5. Next, you can select the comfort setting on the Beiqi Shenbao D50 car display, as shown in the figure below.

6. Finally, on the display screen of BAIC Bishenbao D50, you can choose the rearview mirror to be folded automatically or manually.

Summary. When removed, the interior mirror base remains attached to the front windshield. When installing, just align and then rotate 90 degrees clockwise.

Pay attention to the strength when disassembling and installing to avoid damaging the front windshield. Note that removing the inner rearview mirror can easily damage the base, resulting in loosening after installation.

Hello, I am Wang Gong, a cooperative teacher who asks a question, good at engine maintenance, and has been engaged in the auto repair industry for 9 years now, and I am happy to serve you.

Hello, my side is inquiring for you, please wait a while, I will reply to you immediately Hello. I'm glad to answer for you. Pinch the cylinder behind the rearview mirror, and then rotate 45 degrees counterclockwise to disassemble the yard.

When removed, the interior mirror base remains attached to the front windshield. When installing, just align and then rotate 90 degrees clockwise. Pay attention to the strength when disassembling and installing to avoid damaging the front windshield.

Note that disassembling the inner rearview mirror is easy to damage the base fiber, resulting in loosening after installation.

I hope the above is helpful to you If you are satisfied with me, please give me a thumbs up

1. First of all, you can see that only the base of the chamber zen endoscope is glued to the front windshield.

The sicbod50 mirror folding switch is located on the lower left side of the steering wheel. The mirrors can be adjusted by finding the mirror button on the left side of the center console. Turn the knob to the "L" position to select the left rearview mirror for adjustment, turn the knob to "0" to turn off and take the adjustment function of the sight mirror, and turn the knob to the "R" position to select the right rearview mirror to adjust.

According to the demand, press the button to adjust the angle and adjust the rearview mirror to rotate at the corresponding angle.

The auto-folding of the rearview mirrors is a nice quick feature. Before that, drivers had to put their hands out of the window or get out of the car and fold them, which was inconvenient and unsafe. The way the power mirrors are adjusted differently from model to model, but the functions are the same.

When you press the mirror auto-fold button or rotate the button to the auto-fold position, the exterior mirrors on both sides will be folded at the same time. In general, the next time you start the vehicle, the mirrors that fold automatically turn on. Many car owners reported that when the left and right rearview mirrors are automatically folded, the speed on the left and right sides is inconsistent.

According to our comparative tests, the speed of the left and right mirrors is indeed different when folded. The folding speed of the rearview mirrors on both sides of the pure solid is not the same, because the meshing position on both sides is misaligned, but as long as it can be folded normally, it will not be affected.

Someone else asked, can electric mirrors be broken by hand? It is estimated that many car owners encounter their own car is an electric rear nuclear Tong mirror, others do not know, just get started. Although it looks fine when the electric mirrors are removed, will it damage the electric mirrors?

Actually, it's not a big problem. Whether it is a power mirror or a manual mirror, it can be folded manually. It's just that the electric rearview mirror has a motor and a reduction gear, and it is best to be gentle when you break your hand, otherwise it will be troublesome to break your teeth.

Millions of car purchase subsidies.