How to boot the Yingtai motherboard from the USB flash drive? Which button to press when powered on?

Yingtai motherboard boots from the USB flash drive:

1: Press the power on button, and the power on interface appears.

2: Immediately tap the F9 key or Tab key to bring up the boot menu, select the Legacy mode USB flash drive model, and press the Enter key to boot.

3: Or on the boot interface, press the DEL button to enter the BIOS menu.

Select boot --boot

option

priority--boot

option

The first boot is set to the U disk model, press the F10 key to save and exit, and start the U disk boot.

The specific operation of setting the BIOS to boot from the USB flash drive is as follows:

1. When the motherboard is turned on, wait for the Yingtai logo to appear, press the del key and select the "boot" option.

2. Select the option at the bottom of the page and press Enter.

3. Select the first option and press Enter.

4. Select the inserted USB flash drive, press enter and F4 keys.

5. Restart the computer to enter the boot interface, that is, complete the specific steps of setting up the BIOS from the USB flash drive on the Yingtai motherboard.

Set up a USB flash drive. Move as the first launch method:

1. Press Del or F1 to enter the BIOS when starting the computer.

2. Use the up and down keys on the keyboard, move the cursor to select the second bumper item, and then press Enter. As shown below:

3. After entering the new interface, use the up and down keys on the keyboard, move the cursor to select "enabled", and click the keyboard enter key.

Enter. <>

4. After entering the "enabled" interface, you can see the top ones arranged in order"3 items (some BIOS is 1st boot device; 2nd boot device；3th boot device), which stands for "the first boot device, the second boot, and the third boot". The first item needs to be modified to initiate.

Select "First Launch" and hit Enter to open the menu.

5. After opening the menu, there are 4 options, select the items, and then click the enter key.

6. Finally, save the settings, click the F10 pop-up window, select "OK" to restart the computer, and the boot settings of the stupid U disk are completed.

The steps below are as follows to set the USB flash drive as the first startup item:

1. Insert the USB flash drive first, then turn it on, press the "Del" key immediately to enter the BIOS settings when entering the first interface, and switch to the boot option with the "Tab" key of the keyboard.

2. Then move the cursor to "Hard Driver BBS Priorities" by pressing the " key, and press the enter key to open it, as shown in the following figure:

3. Then open "Hard Driver BBS Priorities", as shown below, then select Boot Option 1, and press Enter.

4. Then select the USB flash drive in the pop-up window (Kingston USB flash drive is used here), as shown in the following figure:

5. After the previous steps are set, restart the computer to set the U disk as the first startup item.

Notes:

If the BIOS settings fail, it is recommended to consult a PC salesperson. If you can't enter the BIOS after pressing the shortcut key, you can try it a few more times, and the general computer boot interface has a prompt BIOS shortcut, you can pay attention to the screen prompt.

How to set the U disk as the first startup item:

1. Press Del or F1 to enter the BIOS when starting the computer.

2. Use the up and down keys on the keyboard, move the cursor to select the second item, and then press Enter. As shown below:

3. After entering the new interface, use the up and down keys on the keyboard, move the cursor to select "enabled", and click the enter key on the keyboard to enter.

4. After entering the "enabled" interface, you can see the top ones arranged in order"3 items (some BIOS is 1st boot device; 2nd boot device；3th boot device), which stands for "first boot, second boot, third boot". The first item needs to be modified to initiate.

Select "First Launch" and hit Enter to open the menu.

5. After opening the menu, there are 4 options, select the items, and then click the enter key.

6. Finally, save the settings, click the F10 pop-up window, select "OK" to restart the computer, and the U disk boot setting is completed.

Generally, desktop computers F11 can enter the Boot tab, press F11 or F9 when the machine is just started, and press F8 for ASUSIf you're not mistaken, a small blue window will appear in the middle of the screen, and you can select your USB drive here.

The shortcut key for the U disk boot of the Yingtai motherboard is F9

The autumn leaves system is easy to use and the game is very smooth!

Look for it under the boot menu! Send a screenshot up, look at the picture and talk the most practical.