The login interface is not displayed when the computer is turned on, and the system cannot be entere

It is possible that the system login file is missing, and it is recommended to reinstall it.

Here's how to fix it:

1. First of all, press the restart button of the host directly, and then press F8 when the reboot is turned on, enter the boot mode selection interface, click [Safe Mode], and you can enter the desktop faster through the safe mode, basically no problem.

2. Then click [Start Menu] in the lower left corner of the desktop.

3. After that, in the interface that came to it, Lu [Control Panel]...

4. Then in the Control Panel, Lu [Uninstall the program].

5. Then uninstall the software and programs that were last able to enter the computer and now have been recently installed.

6. Then we right-click [Computer] and click [Manage] in the pop-up option.

7. Then on the interface, click [Device Manager] on the left side, and then click on the recently installed or updated driver on the right side.

8. The computer boots up - it does not move in the welcome interface, what to do if you can't get into the desktop, we will uninstall these drivers first, and then you can reinstall a reliable imitation orange driver.

9. After we restart the computer, because the program that affected the system before was uninstalled, so we can enter the computer desktop normally.

The computer is an indispensable tool for modern people's work and life, but sometimes we encounter various problems, such as the login screen does not appear after the computer is turned on. This situation may be confusing and annoying, so here is a brief introduction to the possible causes and solutions.

First of all, the computer does not have a login interface after booting up, which may be because there is an error when the system starts, which causes the system to fail to load the lifting ruler normally. In this case, you can try to press the F8 key during the boot process to enter safe mode, and then perform system repair or restore operations. If this method does not solve the problem, you can consider using a system recovery disk to repair it.

Secondly, the lack of a login interface after the computer is turned on may also be due to improper system settings. On Windows, the login screen can be set up through the "User Account" option in the Control Panel. If you find that you are not logged in to the noisy interface, you can try going into safe mode or logging in with an administrator account, and then check if the login screen is enabled in the system settings.

Finally, the lack of a login screen after the computer is turned on may also be due to a hardware failure of the computer. In this case, it is recommended to send the computer to a professional repair shop or contact the manufacturer's after-sales service for repair or replacement hardware.

In conclusion, the lack of login screen after turning on the computer can be caused by a variety of factors, and the solutions vary from case to case. If the above methods cannot solve the problem, it is recommended to contact professional and technical personnel for help in time.

1.If your computer gets stuck on the warm welcome page after booting up and keeps spinning, it could be a problem with the installation of drivers or boot up the operating procedures, and a Trojan virus infection may occur. Customers need to turn on the computer again, press the shortcut key F8, the advanced selection page will occur, and select the safe mode to enter.

Then, according to the sanitization and muffling to carry the uninstall of the driver software that caused the crash, it is actually necessary to view the operation history before the computer problem. 2.If the computer boots up, the computer blue screen, the computer blue screen in addition to facilitating incompatibility issues, poisoning can be reinstalled according to the USB flash drive, but another key factor that leads to the computer blue screen is the computer Blaze hard disk is broken or damaged, or other computer motherboards, computer graphics cards these common faults.

Try manually inserting or replacing your computer's hard drive, but it is recommended or going to a computer repair shop to check it to prevent damage to the server's large hardware configuration. 3.If there is a large amount of English** after the computer starts, and the system freezes after startup**, in most cases, it is caused by system software corruption, such as loss of dominant guide files, partition table corruption, etc.

It is necessary to make a special tool for the operation of the USB flash drive for the computer to reinstall the system.

Summary. Hello dear, this is the most common problem, we turned on the computer, but can not enter the interface, this is one of the common failures we use the computer.

1. The solution to the problem that the computer cannot enter the desktop after booting.

1. Press the Ctrl Shiftesc key to launch Task Manager. Switch to the Processes tab, find it, and press the letter e directly on your keyboard to automatically find the one that starts with e.

2. End the process and click File - New Task (Run) - then enter, and then OK. After the above steps, I believe you will be able to see your long-lost desktop! In fact, this problem is probably caused by too many files saved on your desktop, and it is recommended that you develop good computer habits and save all the data to the d, e, f, g and other disks.

Then you can use software such as PC Manager to clean up the system junk on a regular basis to ensure that your computer will be used faster and faster. Whether the computer is fast or not depends on the person who uses the computer. If you don't have good usage habits, even a high-configuration computer will be very slow after a long time.

The computer cannot enter the interface when it is turned on.

Hello dear, this is the most common problem of Min Pei dismantling, we turned on the machine, but can not enter the interface, this is one of the common failures we use in the computer.

One. 1. Solution to the problem that you can't enter the desktop when you boot up1. Press the Ctrl Shiftesc key to start the task manager. Switch to the Processes tab, find it, and press the letter e directly on your keyboard to automatically find the one that starts with e. 2. End the process and click File - New Task (Run) - then enter, and then OK.

After the above steps, I believe you will be able to see your long-lost desktop! In fact, this problem is probably caused by too many files saved on your desktop, and it is recommended that you develop good computer habits and save all the data to the d, e, f, g and other disks. Then you can use software such as PC Manager to regularly clean up the garbage in the bridge jujube system to ensure that your computer will be used faster and faster.

Whether the computer is fast or not depends on the person who uses the computer. If you don't have good usage habits, even a high-configuration computer will be very slow after a long time.

If the above operation is not suitable for your computer, you can refer to the following operation, step one, first turn on the computer, when the win10 system logo appears, press and hold the power button of the computer to force the shutdown, repeat this operation 2 to 3 times to enter the win10 advanced system settings interface window. Step 2: When you enter the win10 high volume grinding level system setting interface, then click on the "troubleshooting" option, and finally click on the "reset this computer" option, restore the win10 system to the original state block. Step 3: After entering the reset computer interface, click "Keep My Files", the advantage of choosing this option is that although the system is reset, personal files will not be erased, and finally click on the "Reset" option.