The dismantling process of the gantry crane and what procedures need to be handled for the installat

Legal Analysis: Preparation of Materials:

2. The "Crane Installation Qualification" of the installation unit and the qualification certificate of the installer.

3. The qualified certificate, manual, work instruction, registration form and last inspection report of the crane to be installed.

First go to the installation location of the municipal quality and technical supervision bureau safety supervision section for installation notice, and then then go to the special equipment inspection institute for the record to apply for installation supervision and inspection, after the installation to get the finger bucket inspection report and qualified marking.

Legal basis: Civil Code of the People's Republic of China

Article 843: A technology contract is a contract entered into between the parties to establish their rights and obligations with respect to technology development, transfer, licensing, consulting or services.

Article 844: The conclusion of technology contracts shall be conducive to the protection of intellectual property rights and the progress of science and technology, and promote the research and development, transformation, application and promotion of scientific and technological achievements.

Summary. You can try the following steps:1

Disassembling the boom: Remove the pulleys, handles, locking bolts, and other parts from the boom, then separate the boom assembly and put them together. 2.

Dismantling the main frame: Remove the boom assembly from the main frame, then break the main frame into different parts and put them together. 3.

Remove the motor: Disassemble the motor from the bottom of the boom and put them together. 4.

Disassemble other parts: Remove the pulleys, locking bolts, and other parts on the boom and put them together. 5.

Clean the disassembled parts: Clean the disassembled parts so that they can be reinstalled. 6.

Install the motors: Put the motors back in place and make sure they are working properly. 7.

Install other parts: Install pulleys, locking bolts, and other parts to the boom. 8.

Installing the boom: Install the boom assemblies on the main frame and make sure they are securely and stably. 9.

Installation completed: After the installation is completed, please debug it to ensure that the gantry crane works normally. Hope it helps!

You've done a great job! Can you elaborate on that?

You can try the following steps:1Dismantling the boom:

Remove the pulleys, handles, locking bolts, and other parts from the boom, then separate the boom assembly and put them together. 2.Dismantling the main frame:

Remove the boom assembly from the main frame and break it down into different parts to put them together. 3.Disassembling the motor:

Disassemble the motor from the bottom of the boom and put them together. 4.Disassembling other parts:

Disassemble the pulleys, locking bolts, and other parts on the boom and put them together. 5.Clean up the disassembled parts:

Clean the disassembled parts so that they can be reinstalled. 6.Installing the Motor:

Put the motors back in place and make sure they are working properly. 7.Installing Other Parts:

Attach pulleys, locking bolts, and other parts to the boom. 8.Installing the boom:

Install the boom assemblies on the main frame and make sure they are securely and stably. 9.Installation complete:

After the installation is completed, please debug and change the shirt to ensure that the Longhe eggplant cavity door crane works normally. Hope it helps!

Hello dear, happy to answer for you. The process of gantry crane installation and dismantling The process of gantry crane installation and removal mainly includes the following steps: 1. First, the main part of the gantry crane is split into two parts, and the wheels at the top are removed.

2. Then, remove the front and rear axles of the gantry crane, and split them into upper and lower parts. 3. Then, remove the front and rear wheels of the gantry crane and split it into two parts. 4. Finally, remove the chassis of the gantry crane and split it into two parts.

3. Precautions for gantry crane installation and dismantling 1. Before the gantry crane is installed and dismantled, it is necessary to have a comprehensive understanding of the structure of the gantry crane, including the weight, height, distance and other parameters of the gantry crane. 2. Installers need to wear safety helmets, safety shoes and other safety protective equipment to prevent accidents. 3. In the process of dismantling the gantry crane, it is necessary to ensure the smooth operation of the gantry crane and avoid accidents.

4. After dismantling the gantry crane, the safety device of the gantry crane should be checked to ensure that it is intact.

Summary. Hello, I am happy to answer for you: according to your description, here is the answer for you The disassembly of the gantry crane needs to be carried out in accordance with the corresponding procedures, otherwise it may lead to safety accidents, and it is recommended to find professional construction personnel for disassembly operation.

Here's an overview of the disassembly process:1The first thing you need to do is clean the gantry crane, remove all accessories and debris, and disconnect the power supply in the electrical and control systems.

2.Remove the wire rope or chain, lower the main hook, remove the crane arm and the mounting bolts fixed to the bracket. 3.

Operate the jack on the lower platform to lift the gantry support, and remove the supporting bolts and pins on the bridge. 4.Remove the gantry bracket from the tray, remove the tray and isolate it from other components.

5.Remove the main and auxiliary booms and isolate them from the gantry support. 6.

Disassembly according to accessories, including poles, lifting chains, hooks, support frames, etc. 7.Finally, the disassembled parts are cleaned up, checked for damage or malfunction, and stored in a safe place.

Please note that the above steps are for reference only, and the actual disassembly operation needs to take into account different types and different states of gantry cranes, and engineers or professional maintenance personnel are required to operate. Safety is paramount at all times.

Hello, I am happy to answer for you: according to your description, here is the answer for you The disassembly of the gantry crane needs to be carried out in accordance with the corresponding procedures, otherwise it may lead to safety accidents, and it is recommended to find professional construction personnel for disassembly operation. Here's an overview of the dismantling process:

1.The first thing you need to do is clean the gantry crane, remove all accessories and debris, and disconnect the power supply in the electrical and control systems. 2.

Remove the wire rope or chain, lower the main hook, remove the crane arm and the mounting bolts fixed to the bracket. 3.Operate the jack on the lower platform to lift the gantry support, remove the support and lion wide bearing bolts and pins on the bridge.

4.Remove the gantry bracket from the tray, remove the tray and isolate it from other components. 5.

Remove the main and auxiliary booms and isolate them from the gantry support. 6.Disassembly according to accessories, including poles, lifting chains, hooks, support frames, etc.

7.Finally, the disassembled parts are cleaned up to check for damage or malfunction, and the potatoes are stored in a safe place. Please note that the above steps are for reference only, and the actual disassembly operation needs to take into account different types and different states of gantry cranes, and engineers or professional maintenance personnel are required to operate.

Safety is paramount at all times.

Take a look at it dear.

Hello, dear, glad to answer for you. 1: When dismantling, it is necessary to strictly follow the steps of jujube roll demolition, can not be dismantled casually, if the staff needs to change when dismantling, it must be approved before it can be carried out.

2: Check whether the lifting wire rope or chain is broken, and whether there is any wear exceeding the standard. 3：

Workshop workers must wear work clothes, not plastic or the kind with poor slip resistance. 4: If you want to run a high-altitude operation bench, you must wear a fall arrester to prevent falling.