What accessories do you need for tiling? What materials are needed for tile wall covering?

Floor tiles require a lot of auxiliary materials, such as cement and ordinary silicate, as well as medium sand for river sand. Flooring also requires a sealant or a sewing agent. Some cutting tools are also needed as well as cutters, cutters and angle grinders, electric hammers, and more.

When these things are renovated, the general construction personnel will prepare them by themselves.

Cement and sand are needed, the kitchen and bathroom surfaces should be covered with wool and glue, and the bathroom floor and surface should be waterproof. The general accessories and labor add up to 28-30 square meters, and some large decoration companies are about 37-38 square meters. This is a two-year warranty for quality and warranty, I hope Jiuzheng Home Network can help you.

The amount of floor tile accessories area * paving height * cement (bag).

Area * paving height * amount of sand (square).

The amount of auxiliary materials for wall tiles Area * paving height * cement (bag).

Area * paving height * amount of sand (square).

Floor tiles are paved dry, wall tiles are wet paved, and the bathroom door stone must be wet paved (waterproof) The cement of the floor tiles is better, and the cement of the wall tiles is inferior (because the good solidification is too fast and easy to crack the wall tiles).

Anti-antique bricks and wall tiles need to be jointed with the same color caulk after paving.

Tile wall paving requires tiles, cement sand or direct tile adhesive.

If cement mortar is used, it must be brushed before paving, which can increase the contact area between the two to a certain extent. After determining the level of the floor tiles, use wooden squares to support and stabilize them to prevent the bricks from falling.

If mortar is used as a binder, it should be spread over the entire back of the brick to prevent problems.

Check and maintain. After the tile is paved, the maintenance of the tile is also an important part of the construction. Protect the brick surface from damage before use.

After 1 hour of tile laying, use a towel to clean the cement, caulk and other stains on the brick surface. Do not use steel wool balls to clean afterwards, as it is easy to damage the brick surface.

After the tiles are paved, some follow-up works will be carried out, in order to avoid scratching the tiles during the construction, the tiles must be protected after the wall paving is completed. Packing boxes can be placed on the tiles under the walls to avoid touching the brick surface when moving bathroom appliances and construction tools.

12 hours after the paving is completed, you can use the level to check the flatness and verticality of the wall, and hit the tile with a rubber hammer to check the hollow drum of the brick, and find that the hollow drum should be reworked immediately.

Tile on the wall needs special tile adhesive or tile adhesive, tile adhesive has the characteristics of high bonding strength, water resistance, frost resistance, aging resistance and convenient construction of wall tile glue, the adhesive power of tile adhesive is several times that of cement mortar, and is now widely used in various construction places such as inside and outside the wall, ground, bathroom and kitchen.

Commonly used are cement sand, structural glue, and can also be hung on the backbone of the dragon.

The stone bricks are all cement, and then when the cement is paved in the direction, chase him and knock a few times, fix it, and the teacher will be more reliable, fashion, what carpentry, what plasterer, this is all on the building, work, and what materials are building materials.

The wall tiles are ceramic products, and the floor tiles are porcelain products, and the two are not free to use and match due to their different water absorption rates, and they must be used professionally. Among them, the water absorption rate of wall tiles is about 5 8, and the floor tiles are only 0 5 or lower. Since the floor of the bathroom and kitchen often needs to be washed with clean water, the floor tiles with low water absorption should be laid, so that they are not easily affected by water vapor and are not easy to absorb stains.

The wall tiles are glazed, with a high moisture content, and their backs are generally rougher, which is conducive to the wall tiles being more firmly attached to the wall. Therefore, it is best not to mix wall tiles and floor tiles, otherwise it is likely to bring inconvenience to life.

Tiles, cement, mortar, paste, etc.!

Tile on the wall, there are many aspects to consider, you need to pave the height, as well as the place where you pave the tile, there is the size and type of the tile you pave, different choices then need different accessories, if you are pasted in the bathroom, the choice is only porcelain tiles, then you can use mortar directly when you pave the wall, if you choose a tile, then you need to roll a layer of tile adhesive on the wall and the back of the tile, if the size of the tile is more than one meter, Then it's best to consider hanging copper wire or iron sheets or the like. If it is laid outdoors, then the materials used are different, and the raw materials used are different for laying on the original wall and laying on the wooden boards.

What material is more solid to use to put wall tiles on the toilet wall tiles.

Cement. Tile. Caulk. There's also something that adds to the cement. I can't remember the name. Just ask about selling tiles. My dad would put tiles.

1. The auxiliary materials required for paving tiles are as follows:

1. Cement, ordinary silicate;

2. River sand, medium sand;

3. Caulk, or beauty sewing agent.

4. Cutting tools, cutting machines, cutting knives, angle grinders, electric hammers;

5. Auxiliary tools: level, line marker, rubber hammer, ash hopper, shovel, water basin, etc.

Second, a bag of cement plus one-third of the sand can be paved with three to four squares, 3 cm thickness of cement cushion, need about 10 bags, the amount of river sand is one-third of the cement, that is, about 3 bags, the beauty sewing agent is 50 grams of a bag.

1. Caulk, or beauty sewing agent.

Due to the thermal expansion and contraction of ceramic tiles, there is a gap when paving, and the size of the gap depends on the style of the tile purchased, the gap between the glazed bricks of the general kitchen and bathroom is between 1mm-2mm, and the antique bricks need a gap of more than 2mm. What needs to be filled in this gap is caulk.

The material of the seam is divided into the following three types, which represent the three qualities of high, medium and low:

1. White cement (commonly known as putty powder). This material is rarely used in the basic home improvement market. Pros: Cheap. Disadvantages: blackened, moldy, falling off, not easy to scrub and clean, single color is not beautiful.

2. Color caulk. Advantages: changeable color, mildew-proof, high adhesion, not easy to fall off, easy to clean. Disadvantages: It will still change color, but it takes a long time, and the cost performance is relatively high.

3. Color sewing agent. Advantages: changeable color, mildew-proof, highest adhesion, will not fall off, easy to scrub, most convenient to clean. Disadvantages: The market is rare, ** higher than the above two.

2. The Cross.

The main purpose is to assist the bricklayer to pave and make the gap size of the tile uniform and more beautiful. In terms of material, it is basically plastic, not expensive but very practical, you can choose how big the cross is according to the size of the tile gap, generally 1mm, the maximum can be 5mm. It is recommended to ask the master bricklayer to use it during the brick-laying process.

3. Yang angle line.

The yang angle line is a tool that assists the bricklayer master to deal with the yang angle of the tile. For example, the flue and sewer pipes of the kitchen and bathroom need to be pasted with tiles, and the corner where the two sides of the pipe meet is called the yang angle.

Construction skills for floor tiling.

1. If ceramic floor tiles are used for tiling, the ceramic floor tiles should be soaked and dried first.

2. When pasting tiles, the cement mortar should be fully smeared on the back of the ceramic floor tiles, and then compacted with a rubber after paving. At the same time, check and correct with a level to wipe the cement mortar on the surface.

3. After 2 to 3 hours after the tile is pasted, wipe the joints with white cement, and use cement mortar with cement and sand = 1:1 (volume ratio), and the joints should be filled densely, flat and smooth. Then wipe the surface with cotton silk.

Construction techniques for wall tile pasting.

1. When the base layer is treated, all kinds of dirt on the wall should be cleaned up, and watered and moistened one day in advance. If the base layer is a new wall, when the cement mortar is dry, it should be arranged with bricks, elastic lines, and pasted surface bricks.

2. Before the formal paste, the standard point must be pasted to control the flatness of the pasting surface, and the flatness should be checked with a ruler at any time during operation.

3. Before pasting the tiles, they must be soaked in clean water for more than two hours, and the bricks should be taken out to dry for later use. When pasting, paste from bottom to top, require the mortar to be full, when the ash is lost, it must be removed and re-glued, and it is not allowed to plug the ash from the brick joints and mouths.

4. When laying and sticking, when encountering pipelines, lamp switches, and supporting parts of toilet equipment, etc., they must be cut and matched with a whole brick sleeve, and it is forbidden to use non-whole bricks to patchwork and paste. The whole or independent parts should be pasted at one time, and when it cannot be completed at one time, the stubble should be left at the construction joint or the dark corner.

In a modern home renovation project, the ground occupies most of the area, so the decoration of the ground is very important. Currently, people often use it in this wayWhat to paste with floor tilesThis? , tiles and other materials to decorate the floor.

In some spaces, the ground floor must be tiled, butWhat to paste with floor tiles？What about the material? What is the point of Feng Shui paving?

Let's take a look at this article!

First of all,What to paste with floor tiles？What materials do you need for floor tiles?

Under normal circumstances, the main material required for floor tile paving is ceramic tile, and auxiliary materials are: cement, river sand, caulk, etc. But now the floor tiles.

All use tile adhesive or liquid tile adhesive cement. In addition, cutting tools and auxiliary tools, cutting tools are also used for laying tiles.

Mainly cutters, cutters, angle grinders and electric hammers.

What to use to paste the floor tiles to talk about the tassels1. The floor tiles should be flat.

Often, the flatness of the floor tiles symbolizes the smoothness of the homeowner and of course prevents accidental bedding. Some people like to use it.

Cobblestones adorn the floor, but this uneven floor tile tends to make people fall over, make people unable to relax, and be tense for a long time.

What to paste with floor tiles2, pattern Ijiri.

The choice of patterns on the floor tiles should be done carefully, and the meaning of auspiciousness is better. But some owners like to seek personal beauty when choosing floor tiles.

At the time of the case, I felt that the meaning of auspiciousness and the common pattern were too cheesy. In fact, this practice is not advisable in Feng Shui.

What to paste with floor tiles3. The color should be stable.

The color of the floor tiles should be chosen darker so that the overall atmosphere is more stable and heavy. So even the stages.

The same five color elements should also be darker. For example, yellow should be dark yellow and light yellow should be avoided.

What to paste with floor tilesThird, the precautions for paving tiles.

When laying floor tiles, be sure to pay attention to the treatment of the waterproof layer. Waterproofing of kitchens and bathrooms requires special attention. Suggestion.

Before laying the floor tiles, you can first lay a layer of asphalt waterproofing and fill the tiles with white cement. In addition, the surface of the brick should be flat and angled.

What to paste with floor tilesTo be precise, the interface should be aligned, and the tiles must be immersed for half a day before use. Different materials should be chosen for tiles in different regions.

That's all for this articleWhat to paste with floor tilesintroduction.

You can get it for free

It is advisable to change the materials used for pasting tiles in the traditional paste: cement and sand or pure cement, using tile adhesive for pasting tiles. Tile adhesive is a polymer-modified cement-based tile adhesive powder.

1. In addition to the use of conventional cement mortar, the paving of ceramic tiles can also be pasted with special tile adhesive. X0D X0A two, tile adhesive, also known as ceramic tile adhesive, is mainly used for pasting ceramic tiles, face tiles, floor tiles and other decorative materials, widely used in interior and exterior walls, ground, bathroom, kitchen and other building finishing decoration places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.

The mixed adhesive should be used up as soon as possible, apply the mixed adhesive to the back of the pasted brick, and then press hard until it is flat. The actual consumption varies depending on the material.