What is the right position for the car s reflector?

The adjustment of the external reflector should be able to appear about one-third of the sky and two-thirds of the ground, so as to ensure most of the road conditions, and if the owner is adjusting left and right, it should be that the conditions around the body also appear in the realization range of the external reflector, and it is best to add a wide-angle lens in the upper left corner of the left mirror and the lower left corner of the right mirror to ensure that a better field of vision can be used, and the angle should be appropriately adjusted on the basis of the day at night to ensure that the field of vision can be maintained on the basis of the day.

The car reflector is actually a convex mirror, so that the driver can obtain a broader field of view from the reflector when driving, and the adjustment of the reflector still has a certain method, for the reflector that is not a full field of view, a wide-angle mirror with a large field of view can be added at the corner, that is, a small round mirror, so that more road conditions can be ensured, and because the reflector has a different emissivity in day and night, its size is related to the reflective film material on the inner surface of the mirror, and the greater the reflectivity, The clearer the image reflected by the mirror, and the angle of the mirror is different during the day and night, and when replacing the mirror, you should replace some reasonable curved surface design, and do not pursue too exaggerated curved surface.

Left and right rearview mirrors, it is generally recommended that you can see one side of your body, and don't push too much inside. The side of your own car is about a quarter no more than a quarter of the mirror.

As for the adjustment of the upper and lower angles of the mirror, it is generally recommended that the left rearview mirror be "half of the sky and half of the ground". The rear side mirror is "one-third in the sky and two-thirds on the ground".

The rearview mirror in the car can basically be seen in the rear window intact.

AutomobileReflectorsWhat is the right position to transfer:

The first is the left side mirror, and the driver wants to take the horizon.

As a benchmark, by adjusting the upper and lower angles, the rearview mirror shows half of the sky and half of the ground. Then the left and right angles are adjusted to about 1 4 in the range of the mirror occupied by the body. Note that when adjusting the rearview mirror of the car, it should be based on the driving sitting position, and it cannot be said that it can be adjusted by looking at the rearview mirror closely.

Then there is the right side mirror, because the right side of the car mirror is the farthest away from the driver's position, so we have to reduce the space occupied by the sky, try to leave the space of the rearview mirror to the side of the body, so the right side of the car rearview mirror sky only occupies 1 4, and the body also occupies 1 4.

Back to the rearview mirror in the car, its adjustment is relatively simple, many people adjust the rearview mirror The misunderstanding is to use it to observe the rear passengers or think it is an eyesore, and twist directly to the sky.

The correct adjustment is through the rearview mirror to see the situation behind the car through the rear window, and the ground and the sky occupy half of the ratio, then it is OK.

The things you need to pay attention to when buying a car are as follows:

1. Confirm the purchasing ability

Determine the purchasing ability, after buying a car does not affect the overall quality of life of the family, generally based on the average income of the family in the past three years, generally take out 20% of the family for three years, but not more than the fixed assets of the family.

10% of the value.

2. Concerns:

The most important thing for a family car is safety, followed by affordability, because the safety of the car carries the life of a family, so safety is the top priority.

3. On-site confirmation:

According to the above two steps, basically determine the several models to buy, and go to the 4S store in person.

On-site confirmation, including test drives, inquiries, loans, repairs and maintenance, etc.

The adjustment of the external reflector should be able to appear about one-third of the sky and two-thirds of the ground, so as to ensure most of the road conditions, and if the owner is adjusting left and right, it should be that the conditions around the body also appear in the realization range of the external reflector, and it is best to add a wide-angle lens in the upper left corner of the left mirror and the lower left corner of the right mirror to ensure that a better field of vision can be used, and the angle should be appropriately adjusted on the basis of the day at night to ensure that the field of vision can be maintained on the basis of the day.

The car reflector is actually a convex mirror, so that the driver can obtain a broader field of view from the reflector when driving, and the adjustment of the reflector still has a certain method, for the reflector that is not a full field of view, a wide-angle mirror with a large field of view can be added at the corner, that is, a small round mirror, so that more road conditions can be ensured, and because the reflector has a different emissivity in day and night, its size is related to the reflective film material on the inner surface of the mirror, and the greater the reflectivity, The clearer the image reflected by the mirror, and the angle of the mirror is different during the day and night, and when replacing the mirror, you should replace some reasonable curved surface design, and do not pursue too exaggerated curved surface.

A normal driver can see about 200 degrees left and right in front of him without looking back, in other words, about 160 degrees is invisible, so we must treat our good helper - the rearview mirror.

Specifically**rearview mirror, adjust the left and right positions to the left edge of the mirror just to cut to the right ear of your image in the mirror, which means that in general driving situations, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon in the mirror**.

Next is the left side mirror, which needs to be placed in the upper and lower positions to put the distant horizon in **, and the left and right positions are adjusted to 1 4 in the mirror range occupied by the body.

Because the driver's seat is located on the left side, so the driver's grasp of the right side of the car ear is not so easy, coupled with the need to sometimes stop on the side of the road, the ground area in the right rearview mirror when adjusting the upper and lower positions should be larger, accounting for about 2 3 of the mirror surface. The left and right positions are also adjusted to the body occupies 1 4 area.

When driving at high speeds, the driving school may have more blind spots than you expected, but it is not something that can be covered by just three rearview mirrors, so whether you are switching lanes or turning left and right, you should pay more attention to the rearview mirror!

Carefully grasp the above points, your driving is not harmful, and finally a wordy sentence, you must regularly check the road conditions through the rearview mirror during the road test, otherwise, the examiner will judge that there is a lack of awareness of safe driving school.

What is the best position to adjust the car mirrors?

Novice drivers should pay special attention! The rearview mirror of the car must be adjusted to such a position to minimize the blind spot.

Both sides are horizon in the mirror 2 5 ground 2 sky 3, and then adjust as far as possible, and then in a normal driving posture can see their body in the mirror accounted for about 1 6. Seeing the body is for narrow road turns, and the distance between the body and the obstacle can be seen for easy adjustment.

You can see the back and the ground.

There is no unified standard for the adjustment of the rearview mirror, as long as the blind spot is reduced as much as possible, and the driver can observe comfortably. After putting the rearview mirror, you can observe your own body from the mirror, and the body area should not exceed 1 4 of the mirror image is a reasonable range (try to see your own body area as much as possible).

In principle, observe the scene behind the car from the rearview mirror on both sides, so that the distant ground plane is in a mirror image. However, some friends are accustomed to lowering the angle of the right rearview mirror, so as to better observe the right side of the road when reversing, this approach is not wrong, but the angle should not be too low, based on the distant horizon, the road surface area should not exceed 2 3 The mirror area is a reasonable range.

How to judge the distance of the rear car by the exterior mirror?

1. The rear car is full of exterior mirrors At this time, the gap between the front and rear cars should be 2 4 meters. Therefore, when the rear car fills the rearview mirror, the distance between the two cars is already very close, and it will be very dangerous to merge at this time.

2. The rear car is full of rearview mirrors 2 3 At this time, the distance from the rear car is 4 6 meters, which is relatively safe in the daily slow driving in the city.

3, the rear car is full of rear-view mirror 1 2 at this time from the distance from the rear car is 7 meters 9 meters, in the daily driving and when the speed is slow, such a distance can be carried out parallel and other operations, but when the speed is fast or then high-speed driving, such a distance for overtaking or the front car sudden braking is very easy to cause accidents.

4, the rear car full of rearview mirror 1 3. At this time, the distance from the rear car is 10 15 meters, which is basically a relatively safe distance in daily driving, but in the highway or fast environment, you should be extra careful when merging. Try to change lanes after confirming safety when the rear car occupies the rearview mirror 1 3.

Simply and clearly give you a few diagrams.

Left side mirror. <>

Right side mirror. In the figure, the "green line" marks the whole mirror width of the body 1 4, and the "green word" is the description of the green line. The "purple line" indicates the height of the entire mirror 1 2, and the "red letter" indicates the purple line.

Step 1 Adjust the mirrors.

The left and right positions are adjusted to the left edge of the mirror surface just to cut to the right ear of the image in the mirror, which means that in general driving situations, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror **.

Step 2 Adjust the left side mirror.

When dealing with the upper and lower positions, the distant horizon line is set to **, and the left and right positions are adjusted to 1 4 of the mirror range occupied by the body.

Step 3 Adjust the right side mirror.

Because the driver's seat is located on the left side, so the driver's grasp of the situation on the right side of the car is not so easy, coupled with the need to sometimes park on the side of the road, the right side of the rearview mirror should be left larger when adjusting the upper and lower positions, accounting for about 2 3 of the mirror surface. As for the left and right positions, it is also adjusted to the body occupies 1 4 mirror area.

Step 4 How to eliminate blind spots as much as possible.

Studies have shown that perhaps in order to maintain a neat appearance at any time, or because of the love of beauty, there are also many drivers who adjust the ** rearview mirror to be able to shine themselves in, which is the wrong approach. Normally, the driver should be able to see about 200 degrees ahead of him if he only rolls his eyes without looking back.

When others talk about you, ask yourself if you are afraid or not, and whether you will lose or not. Don't be afraid, don't retreat, don't hesitate, and when you're sad, go and see the world alone. Ask yourself, have you done your best for your dreams? Good morning!

The mirror is adjusted to a third of the way. Depending on the height and position of the model and the driver, as long as the left and right rearview mirrors are adjusted, you can see that the corresponding door handle occupies one-third of the upper edge of the rearview mirror, so that the rearview mirror presents half of the sky and the ground, so as to minimize the blind spot of the vision.

The rearview mirror is not a flat mirror, but a convex mirror. Convex mirrors have curvature (the degree to which the mirror is curved). The image it reflects is smaller than that of the eye, but the field of view is large, which is equivalent to the "wide angle" of the camera.

The greater the curvature, the wider the range, but the greater the distortion. The mirror on the driver's side is large and has little curvature; The other side has a small mirror surface and a large curvature. So as to ensure that the driver's left and right vision is basically the same.

Advantages of reflectors:

1. It is suitable for convenience stores, large supermarkets, road turns, factories, and parking lots.

2. Not easy to wear, anti-sunlight and ultraviolet rays, long-lasting endurance.

3. Strong, durable and shatterproof.

4. The mirror image is clear, definite and easy to install.

There are also some blind spots, so we can't rely entirely on the mirror. Many novice drivers basically don't know how to adjust their mirrors. They just barely cope, but if they adjust at will, there can be a big blind spot.

Today, we're going to talk about how to adjust the rearview mirror for a larger field of view and a smaller blind spot.

1.Properly adjusting a car reflector is a science, but different models of reflectors have different viewing angles and field of view. This is not necessarily true if someone else guides you.

Everything should be based on your own car. The principle of adjusting the optimal position of the mirror is to minimize the blind spot. Because the smaller the blind spot, the higher the safety factor of driving.

2.When adjusting the left mirror, the driver should use the horizon as a reference and adjust the up and down angles so that the sky and ground are half represented in the mirror. Then there are the left and right corners, which adjust the range of mirrors occupied by the body to about 1 4.

Note that when adjusting the rearview mirror, the driver's sitting position should be based on the driver's position. It cannot be said that the adjustment is observed near the rearview mirror.

3.Since the right rearview mirror is farther away from the driver, the sky should take up less space. As a result, the ratio of sky to ground in the right mirror is different compared to the left mirror. The sky accounts for 1 4 and the ground for 3 4. The left and right corners are similar to the left rearview mirror.

4.Finally, the adjustment of the rearview mirror in the car is much simpler, it is mainly to hold the rearview mirror and see the situation behind the car through the window. Many people's misconceptions when adjusting the rearview mirror in the car are to take pictures of themselves.

The above is the adjustment method of the car rearview mirror, some cars will be different because of the body size, so the adjustment method is not exactly the same, but basically according to this method to make a slight change is not a big problem, they must be flexible changes, remember that the body can not account for most of the mirror can not be too small, too large will have a large field of vision blind spot, too small can not see their own body situation, in reversing is prone to scratch accidents.