What s going on with the water on the top of the refrigerator, why is there always water in the refr

Refrigerator water is generally divided into two types: internal water and external water.

Water outside the refrigerator:

1.The water tray and evaporator at the back of the refrigerator are filled with water and overflow, causing water to be around the outside of the refrigerator.

2.The water flows out by pressing the water tray or evaporator that is not in the right position, deviated, oblique or not put in place;

Water in the refrigerator:

1.Excessive sweat in food placed in the refrigerator. Fruits, vegetables, etc., which have not been drained, cause water to accumulate.

2.Refrigeration problems in the refrigerator, causing frost to melt.

3.The anti-freeze and defrosting devices of the refrigerator are damaged, and in the humid season, the hot air condenses into dew drops on the surface around the door of the box, and water accumulates over time.

4.The drain pipe is blocked, and the defrosted water cannot be channeled into the tray and evaporator, but into the tank. Or that the drain is clogged with dirt and ice.

1. First of all, check the lower drain first, you can directly find some water to align with the leakage, that is, fill the small hole (about the thickness of the little thumb) in the middle of the "V" shaped sink in the lower part of the "back" of the refrigerator, and the water overflows to indicate that the drain pipe is blocked.

2. Clean the drainage pipe: There is a green drainage rod at the drainage hole, hold the drainage rod with your hand, and stir and pull repeatedly at the drainage hole to achieve the purpose of cleaning. It is also possible to unclog the drain with a longer wire.

It is normal for the refrigerator to accumulate water, but some refrigerators have less water.

Normal phenomenon, physical knowledge ......

Causes of water accumulation in the refrigerator: Food with a lot of moisture or opening the door too often.

When the food is stored, the temperature is too high and it is not cooled directly into the refrigerator, the hot air has a large water content, and cooling in the refrigerator will cause a large amount of condensation, and the generation of condensate will be greater than the speed of discharge, which will cause water accumulation.

If the door is opened too often, a large amount of hot air will enter the refrigerator, and the hot air will produce condensate in the condensation, and the condensate will be generated more than the speed of discharge, which will cause water accumulation.

Power Saving Tips:

The refrigerator should be placed in a position that is free from direct sunlight, conducive to ventilation, and at the same time keep a distance from the wall so that the heat generated during the operation of the refrigerator can be dissipated.

Always check the tightness of the refrigerator seal, if the seal is deformed, it will affect the degree of closure of the seam, causing the air conditioner to leak out, thereby increasing power consumption. If the deformation is serious, it should be repaired and replaced in time.

After the refrigerator is used for a period of time, some frost will be produced, if it cannot be frosted regularly, it will affect the cooling effect, and the power consumption will also increase, and even easily damage the compressor. Therefore, whenever you see that the thickness of the frost is more than 7cm, you should defrost it.

The refrigerator at home often accumulates water, not the fault of the refrigerator, the master teaches you to use this method, and the refrigerator will no longer accumulate water.

First of all, you look at the drainage hole under the refrigerator, whether it is blocked, if it is blocked, poke it with a long wire, wrap the wire head with tape to prevent the pipe from being damaged, and when you usually put something, do not release heat, and moisture things, do not open the door frequently.

There is a drainage hole in the back wall of the refrigerator room, and the melted water can be discharged during normal shutdown, but it is blocked by a small amount of debris (slightly) after a long time, resulting in poor water outlet, and the fresh-keeping layer will accumulate water or freeze. There is a curved pipe under the small hole, which cannot be solved by poking something, you can open the small lid behind the refrigerator, you can see the drain pipe head, and blow hard against the pipe to blow out the debris! Then pour some water from the drain hole in the refrigerator (add a small amount of washing) and rinse it a few times!

Very effective!

The refrigeration effect deteriorated, and when the temperature rises, the ice melts and the cold air in the refrigerator condenses into water.

The old water in the refrigerator means that the refrigeration function of your refrigerator is not very good, you can't freeze the ice, the temperature is not low, you should replace the refrigerator with a new refrigerator or repair it, if the refrigerator is not expensive now, the maintenance fee is not as good as buying another refrigerator.

It could be due to the following reasons:

1.If the refrigerator door is not well sealed, the water vapor in the air will enter the refrigerator, and when it encounters the condenser, it will condense into water droplets and accumulate on the upper layer of the refrigerator.

2.Too much moisture inside the refrigerator may be due to a large amount of water in the food, or a clogged drain hole inside the refrigerator, which prevents the water from being discharged.

3.The refrigerator temperature is set too low, causing the condenser to overwork, producing too many water droplets.

Workaround:1Check whether the refrigerator door is well sealed, and replace the sealing strip in time if there is a problem.

2.Clean the inside of your refrigerator regularly, keep it dry, and clean the drain holes.

3.Adjust the refrigerator temperature to avoid overworking the condenser due to too low a temperature.

There are several possible causes of water accumulation on the refrigerator:

1.Poor sealing of refrigerator doors: If the refrigerator door is poorly sealed, air will flow into the inside of the refrigerator, causing water vapor to condense into water droplets, which will eventually accumulate on the upper layer of the refrigerator.

2.Refrigerator temperature is too low: If the refrigerator temperature is too low, water vapor can condense into water droplets that eventually accumulate on the upper layers of the refrigerator.

3.Clogged Refrigerator Drain Holes: Another cause of water accumulation on the top layer of your refrigerator can be a clogged drain hole. If the drain hole is blocked, the water can't flow out and eventually accumulates on the top layer of the refrigerator.

4.Refrigerator defrost system is a barrier: If the refrigerator defrost system fails, the ice inside the refrigerator will melt into water and eventually accumulate on the top layer of the refrigerator.

If you notice water standing on top of your refrigerator, you can first check that the refrigerator door is well sealed and that there are any clogged drain holes. If neither of the above problems is present, you may need to contact a professional maintenance personnel to check whether the refrigerator defrost system is normal.

Reasons: 1. In the actual working process of the refrigerator, the corresponding water vapor will inevitably be produced inside, and there will be a certain amount of water in the food, which will cause a certain amount of water accumulation in the refrigerator, 2. The reason may be that the drainage hole of the refrigerator is blocked or the drainage pipe of the refrigerator is not dredged regularly, resulting in serious water accumulation inside the refrigerator.

Solution: 1. We need to purchase reasonably, don't hoard too many dishes, and ensure air circulation in the refrigerator. In addition, for vegetables and fruits with more moisture, you need to pay attention not to be too close to the wall of the refrigerator room when storing, and it is a good practice to pack them in a fresh-keeping bag, and it is recommended to put them in the middle of the refrigerator compartment.

Do not put too hot food in the refrigerator, or cover it with plastic wrap.

2. It is necessary to detect the working status of the drainage hole in time, if the corresponding blockage occurs inside the pipeline, you need to cut off the power supply of the refrigerator, use thin wires, straws and other slender objects, dredge it back and forth in the drainage hole, and finally pour some hot water into it and pump it out. For refrigerators, regular plumbing maintenance and cleaning is also very important.

The reason may be that the refrigerator door is not closed tightly or the sealing strip is leaking, resulting in the continuous flow of hot air into the refrigerator, and the refrigerator door needs to be checked in time; The reason may be that there is too much food stored in the refrigerator, and it is necessary to reasonably control the amount of food in the refrigerator; The reason may be that the operating temperature inside the refrigerator is too low, and it is necessary to set up a suitable refrigerator workplace.

1. Check the closed state of the refrigerator door in time, whether there is obvious air leakage in the sealing strip, resulting in the continuous entry of external hot air into the inside of the refrigerator, it is necessary to check the opening and closing of the refrigerator door, and if necessary, it is also necessary to replace the sealing strip, and it is also necessary to check whether there is dirt on the refrigerator door adhesive strip in time, and if obvious stains are found, wipe them with a rag.

2. Too much food stored inside the refrigerator will also cause the temperature of the refrigerator to rise rapidly, it is necessary to reasonably control the amount of food put in, for some foods with relatively high temperatures, it is necessary to seal them with plastic bags in time to prevent the evaporation of water vapor in the food will also lead to a rapid increase in the amount of water in the refrigerator.

3. In the process of setting the refrigerator gear, it is necessary to ensure the appropriate working gear standard. Reasonable control of the actual refrigeration working temperature of the refrigerator, if the refrigeration temperature is too low, it will also lead to the appearance of internal moisture, need to be controlled at a temperature of 2 6.

Improper storage of food may be the high temperature of the food stored in the refrigerator, or the accumulation of water in the refrigerator due to improper storage methods. Because the refrigerator is a closed space every day, when the food temperature is too high or contains steam, put it in the refrigerator, and the steam will condense into a large amount of condensation when it encounters cold air. When condensate forms faster than the refrigerator drains water, the refrigerator is prone to water accumulation.

To do this, we need to purchase reasonably, don't hoard too many dishes, and ensure air circulation in the refrigerator. In addition, for vegetables and fruits with a lot of moisture, be careful not to store them too close to the inner wall of the refrigerator. It's good practice to wrap it in a crisper bag.

It is recommended to place them in the middle of the cold tour mountain storage room. Do not leave hot food in the refrigerator or cover it with plastic wrap. 2.

The drain is clogged.